What is “2's Complement”?

Question

Two's complement is a clever way of storing integers so that common math problems are very simple to implement.

To understand, you have to think of the numbers in binary.

It basically says,

• for zero, use all 0's.
• for positive integers, start counting up, with a maximum of 2^{(number of bits - 1)}-1.
• for negative integers, do exactly the same thing, but switch the role of 0's and 1's and count down (so instead of starting with 0000, start with 1111 - that's the "complement" part).

Let's try it with a mini-byte of 4 bits (we'll call it a nibble - 1/2 a byte).

• 0000 - zero
• 0001 - one
• 0010 - two
• 0011 - three
• 0100 to 0111 - four to seven

That's as far as we can go in positives. 2³-1 = 7.

For negatives:

• 1111 - negative one
• 1110 - negative two
• 1101 - negative three
• 1100 to 1000 - negative four to negative eight

Note that you get one extra value for negatives (1000 = -8) that you don't for positives. This is because 0000 is used for zero. This can be considered as Number Line of computers.

Distinguishing between positive and negative numbers

Doing this, the first bit gets the role of the "sign" bit, as it can be used to distinguish between nonnegative and negative decimal values. If the most significant bit is 1, then the binary can be said to be negative, where as if the most significant bit (the leftmost) is 0, you can say the decimal value is nonnegative.

"Sign-magnitude" negative numbers just have the sign bit flipped of their positive counterparts, but this approach has to deal with interpreting 1000 (one 1 followed by all 0s) as "negative zero" which is confusing.

"Ones' complement" negative numbers are just the bit-complement of their positive counterparts, which also leads to a confusing "negative zero" with 1111 (all ones).

You will likely not have to deal with Ones' Complement or Sign-Magnitude integer representations unless you are working very close to the hardware.

I wonder if it could be explained any better than the Wikipedia article.

The basic problem that you are trying to solve with two's complement representation is the problem of storing negative integers.

First, consider an unsigned integer stored in 4 bits. You can have the following

0000 = 0
0001 = 1
0010 = 2
...
1111 = 15

These are unsigned because there is no indication of whether they are negative or positive.

Sign Magnitude and Excess Notation

To store negative numbers you can try a number of things. First, you can use sign magnitude notation which assigns the first bit as a sign bit to represent +/- and the remaining bits to represent the magnitude. So using 4 bits again and assuming that 1 means - and 0 means + then you have

0000 = +0
0001 = +1
0010 = +2
...
1000 = -0
1001 = -1
1111 = -7

So, you see the problem there? We have positive and negative 0. The bigger problem is adding and subtracting binary numbers. The circuits to add and subtract using sign magnitude will be very complex.

What is

0010
1001 +
----

?

Another system is excess notation. You can store negative numbers, you get rid of the two zeros problem but addition and subtraction remains difficult.

So along comes two's complement. Now you can store positive and negative integers and perform arithmetic with relative ease. There are a number of methods to convert a number into two's complement. Here's one.

Convert Decimal to Two's Complement

1. Convert the number to binary (ignore the sign for now) e.g. 5 is 0101 and -5 is 0101

2. If the number is a positive number then you are done. e.g. 5 is 0101 in binary using two's complement notation.

3. If the number is negative then

   3.1 find the complement (invert 0's and 1's) e.g. -5 is 0101 so finding the complement is 1010

   3.2 Add 1 to the complement 1010 + 1 = 1011. Therefore, -5 in two's complement is 1011.

So, what if you wanted to do 2 + (-3) in binary? 2 + (-3) is -1. What would you have to do if you were using sign magnitude to add these numbers? 0010 + 1101 = ?

Using two's complement consider how easy it would be.

 2  =  0010
 -3 =  1101 +
 -------------
 -1 =  1111

Converting Two's Complement to Decimal

Converting 1111 to decimal:

1. The number starts with 1, so it's negative, so we find the complement of 1111, which is 0000.

2. Add 1 to 0000, and we obtain 0001.

3. Convert 0001 to decimal, which is 1.

4. Apply the sign = -1.

Tada!

Like most explanations I've seen, the ones above are clear about how to work with 2's complement, but don't really explain what they are mathematically. I'll try to do that, for integers at least, and I'll cover some background that's probably familiar first.

Recall how it works for decimal:
  2345
is a way of writing
  2 × 10³ + 3 × 10² + 4 × 10¹ + 5 × 10⁰.

In the same way, binary is a way of writing numbers using just 0 and 1 following the same general idea, but replacing those 10s above with 2s. Then in binary,
  1111
is a way of writing
  1 × 2³ + 1 × 2² + 1 × 2¹ + 1 × 2⁰
and if you work it out, that turns out to equal 15 (base 10). That's because it is
  8+4+2+1 = 15.

This is all well and good for positive numbers. It even works for negative numbers if you're willing to just stick a minus sign in front of them, as humans do with decimal numbers. That can even be done in computers, sort of, but I haven't seen such a computer since the early 1970's. I'll leave the reasons for a different discussion.

For computers it turns out to be more efficient to use a complement representation for negative numbers. And here's something that is often overlooked. Complement notations involve some kind of reversal of the digits of the number, even the implied zeroes that come before a normal positive number. That's awkward, because the question arises: all of them? That could be an infinite number of digits to be considered.

Fortunately, computers don't represent infinities. Numbers are constrained to a particular length (or width, if you prefer). So let's return to positive binary numbers, but with a particular size. I'll use 8 digits ("bits") for these examples. So our binary number would really be
  00001111
or
  0 × 2⁷ + 0 × 2⁶ + 0 × 2⁵ + 0 × 2⁴ + 1 × 2³ + 1 × 2² + 1 × 2¹ + 1 × 2⁰

To form the 2's complement negative, we first complement all the (binary) digits to form
  11110000
and add 1 to form
  11110001
but how are we to understand that to mean -15?

The answer is that we change the meaning of the high-order bit (the leftmost one). This bit will be a 1 for all negative numbers. The change will be to change the sign of its contribution to the value of the number it appears in. So now our 11110001 is understood to represent
  -1 × 2⁷ + 1 × 2⁶ + 1 × 2⁵ + 1 × 2⁴ + 0 × 2³ + 0 × 2² + 0 × 2¹ + 1 × 2⁰
Notice that "-" in front of that expression? It means that the sign bit carries the weight -2⁷, that is -128 (base 10). All the other positions retain the same weight they had in unsigned binary numbers.

Working out our -15, it is
  -128 + 64 + 32 + 16 + 1
Try it on your calculator. it's -15.

Of the three main ways that I've seen negative numbers represented in computers, 2's complement wins hands down for convenience in general use. It has an oddity, though. Since it's binary, there have to be an even number of possible bit combinations. Each positive number can be paired with its negative, but there's only one zero. Negating a zero gets you zero. So there's one more combination, the number with 1 in the sign bit and 0 everywhere else. The corresponding positive number would not fit in the number of bits being used.

What's even more odd about this number is that if you try to form its positive by complementing and adding one, you get the same negative number back. It seems natural that zero would do this, but this is unexpected and not at all the behavior we're used to because computers aside, we generally think of an unlimited supply of digits, not this fixed-length arithmetic.

This is like the tip of an iceberg of oddities. There's more lying in wait below the surface, but that's enough for this discussion. You could probably find more if you research "overflow" for fixed-point arithmetic. If you really want to get into it, you might also research "modular arithmetic".

2's complement is very useful for finding the value of a binary, however I thought of a much more concise way of solving such a problem(never seen anyone else publish it):

take a binary, for example: 1101 which is [assuming that space "1" is the sign] equal to -3.

using 2's complement we would do this...flip 1101 to 0010...add 0001 + 0010 ===> gives us 0011. 0011 in positive binary = 3. therefore 1101 = -3!

What I realized:

instead of all the flipping and adding, you can just do the basic method for solving for a positive binary(lets say 0101) is (2³ * 0) + (2² * 1) + (2¹ * 0) + (2⁰ * 1) = 5.

Do exactly the same concept with a negative!(with a small twist)

take 1101, for example:

for the first number instead of 2³ * 1 = 8 , do -(2³ * 1) = -8.

then continue as usual, doing -8 + (2² * 1) + (2¹ * 0) + (2⁰ * 1) = -3

Imagine that you have a finite number of bits/trits/digits/whatever. You define 0 as all digits being 0, and count upwards naturally:

00
01
02
..

Eventually you will overflow.

98
99
00

We have two digits and can represent all numbers from 0 to 100. All those numbers are positive! Suppose we want to represent negative numbers too?

What we really have is a cycle. The number before 2 is 1. The number before 1 is 0. The number before 0 is... 99.

So, for simplicity, let's say that any number over 50 is negative. "0" through "49" represent 0 through 49. "99" is -1, "98" is -2, ... "50" is -50.

This representation is ten's complement. Computers typically use two's complement, which is the same except using bits instead of digits.

The nice thing about ten's complement is that addition just works. You do not need to do anything special to add positive and negative numbers!

I read a fantastic explanation on Reddit by jng, using the odometer as an analogy.

It is a useful convention. The same circuits and logic operations that add / subtract positive numbers in binary still work on both positive and negative numbers if using the convention, that's why it's so useful and omnipresent.

Imagine the odometer of a car, it rolls around at (say) 99999. If you increment 00000 you get 00001. If you decrement 00000, you get 99999 (due to the roll-around). If you add one back to 99999 it goes back to 00000. So it's useful to decide that 99999 represents -1. Likewise, it is very useful to decide that 99998 represents -2, and so on. You have to stop somewhere, and also by convention, the top half of the numbers are deemed to be negative (50000-99999), and the bottom half positive just stand for themselves (00000-49999). As a result, the top digit being 5-9 means the represented number is negative, and it being 0-4 means the represented is positive - exactly the same as the top bit representing sign in a two's complement binary number.

Understanding this was hard for me too. Once I got it and went back to re-read the books articles and explanations (there was no internet back then), it turned out a lot of those describing it didn't really understand it. I did write a book teaching assembly language after that (which did sell quite well for 10 years).

Two complement is found out by adding one to 1'st complement of the given number. Lets say we have to find out twos complement of 10101 then find its ones complement, that is, 01010 add 1 to this result, that is, 01010+1=01011, which is the final answer.