Menu
This question is meant to fill the vacuum of good free information on the subject.
I believe that a good answer will fit into one big SO answer or at least in a few answers.
The main goal is to give complete beginners just enough info so that they can take the manual on their own, and be able to understand basic OS concepts related to paging.
Suggested guidelines:
Related questions and why I think they are not dupes:
How do x86 page tables work?: the title is almost the same as this question, but the body asks specific questions related to cr3 and TLB. That question is a subset of this one.
How does x86 virtualization work: body asks for sources only.
460
The page table is the data structure that defines the mappings from virtual addresses to physical ones. On an architecture like x86, the layout of this data structure is defined by the CPU; every time there's a memory access, the CPU consults the tables and finds out where the real destination should be.
In the Microsoft® Visual Studio™ property window, locate the Behaviors property and click the ellipsis (… ) button to launch the Behaviors Editor Dialog. Check the CheckBox next to Paging from the list on the left to add and enable the behavior.
If the page has recently been referenced, this bit is set to 1, otherwise, it is set to 0. Caching Enabled/Disabled: The reference bit indicates whether or not the page was referred to in the previous clock cycle. If the page has recently been referenced, this bit is set to 1, otherwise, it is set to 0.
That points to a page directory (PD). You then select a then a page directory entry (PDE) from the page directory. This points to a page table (PT). You then select a page table entry (PTE) from the page table. The page table entry tells you where the memory for the page can be found.
Version of this answer with a nice TOC and more content.
I will correct any error reported. If you want to make large modifications or add a missing aspect, make them on your own answers to get well deserved rep. Minor edits can be merged directly in.
Minimal example: https://github.com/cirosantilli/x86-bare-metal-examples/blob/5c672f73884a487414b3e21bd9e579c67cd77621/paging.S
Like everything else in programming, the only way to really understand this is to play with minimal examples.
What makes this a "hard" subject is that the minimal example is large because you need to make your own small OS.
Although it is impossible to understand without examples in mind, try to get familiar with the manuals as soon as possible.
Intel describes paging in the Intel Manual Volume 3 System Programming Guide - 325384-056US September 2015 Chapter 4 "Paging".
Specially interesting is Figure 4-4 "Formats of CR3 and Paging-Structure Entries with 32-Bit Paging", which gives the key data structures.
Paging is done by the Memory Management Unit (MMU) part of the CPU. Like many others (e.g. x87 co-processor, APIC), this used to be by separate chip on early days, which was later integrated into the CPU. But the term is still used.
Logical addresses are the memory addresses used in "regular" user-land code (e.g. the contents of rsi in mov eax, [rsi]).
First segmentation translates them into linear addresses, and then paging then translates linear addresses into physical addresses.
(logical) ------------------> (linear) ------------> (physical) segmentation paging Most of the time, we can think of physical addresses as indexing actual RAM hardware memory cells, but this is not 100% true because of:
Paging is only available in protected mode. The use of paging in protected mode is optional. Paging is on iff the PG bit of the cr0 register is set.
One major difference between paging and segmentation is that:
This is the main advantage of paging, since equal sized chunks make things more manageable.
Paging has become so much more popular that support for segmentation was dropped in x86-64 in 64-bit mode, the main mode of operation for new software, where it only exists in compatibility mode, which emulates IA32.
Paging is used to implement processes virtual address spaces on modern OS. With virtual addresses the OS can fit two or more concurrent processes on a single RAM in a way that:
Paging historically came after segmentation, and largely replaced it for the implementation of virtual memory in modern OSs such as Linux since it is easier to manage the fixed sized chunks of memory of pages instead of variable length segments.
Like segmentation in protected mode (where modifying a segment register triggers a load from the GDT or LDT), paging hardware uses data structures in memory to do its job (page tables, page directories, etc.).
The format of those data structures is fixed by the hardware, but it is up to the OS to set up and manage those data structures on RAM correctly, and to tell the hardware where to find them (via cr3).
Some other architectures leave paging almost completely in the hands of software, so a TLB miss runs an OS-supplied function to walk the page tables and insert the new mapping into the TLB. This leaves page table formats to be chosen by the OS, but makes it unlikely for the hardware to be able to overlap page-walks with out-of-order execution of other instructions, the way x86 can.
This is an example of how paging operates on a simplified version of the x86 architecture to implement a virtual memory space.
The OS could give them the following page tables:
Page table given to process 1 by the OS:
RAM location physical address present ----------------- ----------------- -------- PT1 + 0 * L 0x00001 1 PT1 + 1 * L 0x00000 1 PT1 + 2 * L 0x00003 1 PT1 + 3 * L 0 ... ... PT1 + 0xFFFFF * L 0x00005 1 Page table given to process 2 by the OS:
RAM location physical address present ----------------- ----------------- -------- PT2 + 0 * L 0x0000A 1 PT2 + 1 * L 0x0000B 1 PT2 + 2 * L 0 PT2 + 3 * L 0x00003 1 ... ... ... PT2 + 0xFFFFF * L 0x00004 1 Where:
PT1 and PT2: initial position of table 1 and 2 on RAM.
Sample values: 0x00000000, 0x12345678, etc.
It is the OS that decides those values.
L: length of a page table entry.
present: indicates that the page is present in memory.
Page tables are located on RAM. They could for example be located as:
--------------> 0xFFFFFFFF --------------> PT1 + 0xFFFFF * L Page Table 1 --------------> PT1 --------------> PT2 + 0xFFFFF * L Page Table 2 --------------> PT2 --------------> 0x0 The initial locations on RAM for both page tables are arbitrary and controlled by the OS. It is up to the OS to ensure that they don't overlap!
Each process cannot touch any page tables directly, although it can make requests to the OS that cause the page tables to be modified, for example asking for larger stack or heap segments.
A page is a chunk of 4KB (12 bits), and since addresses have 32 bits, only 20 bits (20 + 12 = 32, thus 5 characters in hexadecimal notation) are required to identify each page. This value is fixed by the hardware.
A page table is... a table of pages table entries!
The exact format of table entries is fixed by the hardware.
On this simplified example, the page table entries contain only two fields:
bits function ----- ----------------------------------------- 20 physical address of the start of the page 1 present flag so in this example the hardware designers could have chosen L = 21.
Most real page table entries have other fields.
It would be impractical to align things at 21 bits since memory is addressable by bytes and not bits. Therefore, even in only 21 bits are needed in this case, hardware designers would probably choose L = 32 to make access faster, and just reserve bits the remaining bits for later usage. The actual value for L on x86 is 32 bits.
Once the page tables have been set up by the OS, the address translation between linear and physical addresses is done by the hardware.
When the OS wants to activate process 1, it sets the cr3 to PT1, the start of the table for process one.
If Process 1 wants to access linear address 0x00000001, the paging hardware circuit automatically does the following for the OS:
split the linear address into two parts:
| page (20 bits) | offset (12 bits) | So in this case we would have:
look into Page table 1 because cr3 points to it.
look entry 0x00000 because that is the page part.
The hardware knows that this entry is located at RAM address PT1 + 0 * L = PT1.
since it is present, the access is valid
by the page table, the location of page number 0x00000 is at 0x00001 * 4K = 0x00001000.
to find the final physical address we just need to add the offset:
00001 000 + 00000 001 ----------- 00001 001 because 00001 is the physical address of the page looked up on the table and 001 is the offset.
As the name indicates, the offset is always simply added the physical address of the page.
the hardware then gets the memory at that physical location.
In the same way, the following translations would happen for process 1:
linear physical --------- --------- 00000 002 00001 002 00000 003 00001 003 00000 FFF 00001 FFF 00001 000 00000 000 00001 001 00000 001 00001 FFF 00000 FFF 00002 000 00002 000 FFFFF 000 00005 000 For example, when accessing address 00001000, the page part is 00001 the hardware knows that its page table entry is located at RAM address: PT1 + 1 * L (1 because of the page part), and that is where it will look for it.
When the OS wants to switch to process 2, all it needs to do is to make cr3 point to page 2. It is that simple!
Now the following translations would happen for process 2:
linear physical --------- --------- 00000 002 00001 002 00000 003 00001 003 00000 FFF 00001 FFF 00001 000 00000 000 00001 001 00000 001 00001 FFF 00000 FFF 00003 000 00003 000 FFFFF 000 00004 000 The same linear address translates to different physical addresses for different processes, depending only on the value inside cr3.
In this way every program can expect its data to start at 0 and end at FFFFFFFF, without worrying about exact physical addresses.
What if Process 1 tries to access an address inside a page that is no present?
The hardware notifies the software via a Page Fault Exception.
It is then usually up to the OS to register an exception handler to decide what has to be done.
It is possible that accessing a page that is not on the table is a programming error:
int is[1]; is[2] = 1; but there may be cases in which it is acceptable, for example in Linux when:
the program wants to increase its stack.
It just tries to accesses a certain byte in a given possible range, and if the OS is happy it adds that page to the process address space.
the page was swapped to disk.
The OS will need to do some work behind the processes back to get the page back into RAM.
The OS can discover that this is the case based on the contents of the rest of the page table entry, since if the present flag is clear, the other entries of the page table entry are completely left for the OS to to what it wants.
On Linux for example, when present = 0:
if all the fields of the page table entry are 0, invalid address.
else, the page has been swapped to disk, and the actual values of those fields encode the position of the page on the disk.
In any case, the OS needs to know which address generated the Page Fault to be able to deal with the problem. This is why the nice IA32 developers set the value of cr2 to that address whenever a Page Fault occurs. The exception handler can then just look into cr2 to get the address.
Simplifications to reality that make this example easier to understand:
all real paging circuits use multi-level paging to save space, but this showed a simple single-level scheme.
page tables contained only two fields: a 20 bit address and a 1 bit present flag.
Real page tables contain a total of 12 fields, and therefore other features which have been omitted.
The problem with a single-level paging scheme is that it would take up too much RAM: 4G / 4K = 1M entries per process. If each entry is 4 bytes long, that would make 4M per process, which is too much even for a desktop computer: ps -A | wc -l says that I am running 244 processes right now, so that would take around 1GB of my RAM!
For this reason, x86 developers decided to use a multi-level scheme that reduces RAM usage.
The downside of this system is that it has a slightly higher access time.
In the simple 3 level paging scheme used for 32 bit processors without PAE, the 32 address bits are divided as follows:
| directory (10 bits) | table (10 bits) | offset (12 bits) | Each process must have one and only one page directory associated to it, so it will contain at least 2^10 = 1K page directory entries, much better than the minimum 1M required on a single-level scheme.
Page tables are only allocated as needed by the OS. Each page table has 2^10 = 1K page directory entries
Page directories contain... page directory entries! Page directory entries are the same as page table entries except that they point to RAM addresses of page tables instead of physical addresses of tables. Since those addresses are only 20 bits wide, page tables must be on the beginning of 4KB pages.
cr3 now points to the location on RAM of the page directory of the current process instead of page tables.
Page tables entries don't change at all from a single-level scheme.
Page tables change from a single-level scheme because:
The reason for using 10 bits on the first two levels (and not, say, 12 | 8 | 12 ) is that each Page Table entry is 4 bytes long. Then the 2^10 entries of Page directories and Page Tables will fit nicely into 4Kb pages. This means that it faster and simpler to allocate and deallocate pages for that purpose.
Page directory given to process 1 by the OS:
RAM location physical address present --------------- ----------------- -------- PD1 + 0 * L 0x10000 1 PD1 + 1 * L 0 PD1 + 2 * L 0x80000 1 PD1 + 3 * L 0 ... ... PD1 + 0x3FF * L 0 Page tables given to process 1 by the OS at PT1 = 0x10000000 (0x10000 * 4K):
RAM location physical address present --------------- ----------------- -------- PT1 + 0 * L 0x00001 1 PT1 + 1 * L 0 PT1 + 2 * L 0x0000D 1 ... ... PT1 + 0x3FF * L 0x00005 1 Page tables given to process 1 by the OS at PT2 = 0x80000000 (0x80000 * 4K):
RAM location physical address present --------------- ----------------- -------- PT2 + 0 * L 0x0000A 1 PT2 + 1 * L 0x0000C 1 PT2 + 2 * L 0 ... ... PT2 + 0x3FF * L 0x00003 1 where:
PD1: initial position of page directory of process 1 on RAM.PT1 and PT2: initial position of page table 1 and page table 2 for process 1 on RAM.So in this example the page directory and the page table could be stored in RAM something like:
----------------> 0xFFFFFFFF ----------------> PT2 + 0x3FF * L Page Table 1 ----------------> PT2 ----------------> PD1 + 0x3FF * L Page Directory 1 ----------------> PD1 ----------------> PT1 + 0x3FF * L Page Table 2 ----------------> PT1 ----------------> 0x0 Let's translate the linear address 0x00801004 step by step.
We suppose that cr3 = PD1, that is, it points to the page directory just described.
In binary the linear address is:
0 0 8 0 1 0 0 4 0000 0000 1000 0000 0001 0000 0000 0100 Grouping as 10 | 10 | 12 gives:
0000000010 0000000001 000000000100 0x2 0x1 0x4 which gives:
So the hardware looks for entry 2 of the page directory.
The page directory table says that the page table is located at 0x80000 * 4K = 0x80000000. This is the first RAM access of the process.
Since the page table entry is 0x1, the hardware looks at entry 1 of the page table at 0x80000000, which tells it that the physical page is located at address 0x0000C * 4K = 0x0000C000. This is the second RAM access of the process.
Finally, the paging hardware adds the offset, and the final address is 0x0000C004.
Other examples of translated addresses are:
linear 10 10 12 split physical -------- --------------- ---------- 00000001 000 000 001 00001001 00001001 000 001 001 page fault 003FF001 000 3FF 001 00005001 00400000 001 000 000 page fault 00800001 002 000 001 0000A001 00801008 002 001 008 0000C008 00802008 002 002 008 page fault 00B00001 003 000 000 page fault Page faults occur if either a page directory entry or a page table entry is not present.
If the OS wants to run another process concurrently, it would give the second process a separate page directory, and link that directory to separate page tables.
64 bits is still too much address for current RAM sizes, so most architectures will use less bits.
x86_64 uses 48 bits (256 TiB), and legacy mode's PAE already allows 52-bit addresses (4 PiB).
12 of those 48 bits are already reserved for the offset, which leaves 36 bits.
If a 2 level approach is taken, the best split would be two 18 bit levels.
But that would mean that the page directory would have 2^18 = 256K entries, which would take too much RAM: close to a single-level paging for 32 bit architectures!
Therefore, 64 bit architectures create even further page levels, commonly 3 or 4.
x86_64 uses 4 levels in a 9 | 9 | 9 | 12 scheme, so that the upper level only takes up only 2^9 higher level entries.
Physical address extension.
With 32 bits, only 4GB RAM can be addressed.
This started becoming a limitation for large servers, so Intel introduced the PAE mechanism to Pentium Pro.
To relieve the problem, Intel added 4 new address lines, so that 64GB could be addressed.
Page table structure is also altered if PAE is on. The exact way in which it is altered depends on whether PSE is on or off.
PAE is turned on and off via the PAE bit of cr4.
Even if the total addressable memory is 64GB, individual process are still only able to use up to 4GB. The OS can however put different processes on different 4GB chunks.
Page size extension.
Allows for pages to be 4M ( or 2M if PAE is on ) in length instead of 4K.
PSE is turned on and off via the PAE bit of cr4.
If either PAE and PSE are active, different paging level schemes are used:
no PAE and no PSE: 10 | 10 | 12
no PAE and PSE: 10 | 22.
22 is the offset within the 4Mb page, since 22 bits address 4Mb.
PAE and no PSE: 2 | 9 | 9 | 12
The design reason why 9 is used twice instead of 10 is that now entries cannot fit anymore into 32 bits, which were all filled up by 20 address bits and 12 meaningful or reserved flag bits.
The reason is that 20 bits are not enough anymore to represent the address of page tables: 24 bits are now needed because of the 4 extra wires added to the processor.
Therefore, the designers decided to increase entry size to 64 bits, and to make them fit into a single page table it is necessary reduce the number of entries to 2^9 instead of 2^10.
The starting 2 is a new Page level called Page Directory Pointer Table (PDPT), since it points to page directories and fill in the 32 bit linear address. PDPTs are also 64 bits wide.
cr3 now points to PDPTs which must be on the fist four 4GB of memory and aligned on 32 bit multiples for addressing efficiency. This means that now cr3 has 27 significative bits instead of 20: 2^5 for the 32 multiples * 2^27 to complete the 2^32 of the first 4GB.
PAE and PSE: 2 | 9 | 21
Designers decided to keep a 9 bit wide field to make it fit into a single page.
This leaves 23 bits. Leaving 2 for the PDPT to keep things uniform with the PAE case without PSE leaves 21 for offset, meaning that pages are 2M wide instead of 4M.
The Translation Lookahead Buffer (TLB) is a cache for paging addresses.
Since it is a cache, it shares many of the design issues of the CPU cache, such as associativity level.
This section shall describe a simplified fully associative TLB with 4 single address entries. Note that like other caches, real TLBs are not usually fully associative.
After a translation between linear and physical address happens, it is stored on the TLB. For example, a 4 entry TLB starts in the following state:
valid linear physical ------ ------- --------- > 0 00000 00000 0 00000 00000 0 00000 00000 0 00000 00000 The > indicates the current entry to be replaced.
and after a page linear address 00003 is translated to a physical address 00005, the TLB becomes:
valid linear physical ------ ------- --------- 1 00003 00005 > 0 00000 00000 0 00000 00000 0 00000 00000 and after a second translation of 00007 to 00009 it becomes:
valid linear physical ------ ------- --------- 1 00003 00005 1 00007 00009 > 0 00000 00000 0 00000 00000 Now if 00003 needs to be translated again, hardware first looks up the TLB and finds out its address with a single RAM access 00003 --> 00005.
Of course, 00000 is not on the TLB since no valid entry contains 00000 as a key.
When TLB is filled up, older addresses are overwritten. Just like for CPU cache, the replacement policy is a potentially complex operation, but a simple and reasonable heuristic is to remove the least recently used entry (LRU).
With LRU, starting from state:
valid linear physical ------ ------- --------- > 1 00003 00005 1 00007 00009 1 00009 00001 1 0000B 00003 adding 0000D -> 0000A would give:
valid linear physical ------ ------- --------- 1 0000D 0000A > 1 00007 00009 1 00009 00001 1 0000B 00003 Using the TLB makes translation faster, because the initial translation takes one access per TLB level, which means 2 on a simple 32 bit scheme, but 3 or 4 on 64 bit architectures.
The TLB is usually implemented as an expensive type of RAM called content-addressable memory (CAM). CAM implements an associative map on hardware, that is, a structure that given a key (linear address), retrieves a value.
Mappings could also be implemented on RAM addresses, but CAM mappings may required much less entries than a RAM mapping.
For example, a map in which:
could be stored in a TLB with 4 entries:
linear physical ------- --------- 00000 00001 00001 00010 00010 00011 FFFFF 00000 However, to implement this with RAM, it would be necessary to have 2^20 addresses:
linear physical ------- --------- 00000 00001 00001 00010 00010 00011 ... (from 00011 to FFFFE) FFFFF 00000 which would be even more expensive than using a TLB.
When cr3 changes, all TLB entries are invalidated, because a new page table for a new process is going to be used, so it is unlikely that any of the old entries have any meaning.
The x86 also offers the invlpg instruction which explicitly invalidates a single TLB entry. Other architectures offer even more instructions to invalidated TLB entries, such as invalidating all entries on a given range.
Some x86 CPUs go beyond the requirements of the x86 specification and provide more coherence than it guarantees, between modifying a page table entry and using it, when it wasn't already cached in the TLB. Apparently Windows 9x relied on that for correctness, but modern AMD CPUs don't provide coherent page-walks. Intel CPUs do, even though they have to detect mis-speculation to do so. Taking advantage of this is probably a bad idea, since there's probably not much to gain, and a big risk of causing subtle timing-sensitive problems that will be hard to debug.
The Linux kernel makes extensive usage of the paging features of x86 to allow fast process switches with small data fragmentation.
In v4.2, look under arch/x86/:
include/asm/pgtable*include/asm/page*mm/pgtable*mm/page*There seems to be no structs defined to represent the pages, only macros: include/asm/page_types.h is specially interesting. Excerpt:
#define _PAGE_BIT_PRESENT 0 /* is present */ #define _PAGE_BIT_RW 1 /* writeable */ #define _PAGE_BIT_USER 2 /* userspace addressable */ #define _PAGE_BIT_PWT 3 /* page write through */ arch/x86/include/uapi/asm/processor-flags.h defines CR0, and in particular the PG bit position:
#define X86_CR0_PG_BIT 31 /* Paging */ Free:
rutgers-pxk-416 chapter "Memory management: lecture notes"
Good historical review of memory organization techniques used by older OS.
Non-free:
bovet05 chapter "Memory addressing"
Reasonable intro to x86 memory addressing. Missing some good and simple examples.
52
Here's a very short, high-level answer:
An x86 processor operates in one of several possible modes (roughly: real, protected, 64-bit). Each mode can use one of several possible memory addressing models (but not every mode can use every model), namely: real-mode addressing, segmented addressing, and flat-linear addressing.
In the modern world, only flat-linear addressing in protected or 64-bit mode are relevant, and the two modes are essentially the same, with the main difference being the size of the machine word and thus the addressable amount of memory.
Now, the memory addressing mode gives meaning to the memory operands of the machine instructions (such as mov DWORD PTR [eax], 25, which stores a 32-bit (aka dword) integer of value 25 into the memory whose address is stored in the eax 32-bit register). In flat-linear addressing, this number in eax is allowed to run over a single, contiguous range, from zero up to the maximal value (in our case that's 232 − 1).
However, flat-linear addressing can be either paged or not paged. Without paging, the address directly refers to physical memory. With paging, the processor's memory management unit (or MMU) transparently feeds the desired address (now called a virtual address) into a lookup mechanism, the so-called page tables, and obtains a new value, which is interpreted as a physical address. The original operation now operates on this new, translated address in physical memory, even though the user only ever sees the virtual address.
The key benefit of paging is that the page tables are managed by the operating system. Thus the operating system can modify and replace the page tables arbitrarily, such as when "switching tasks". It can keep a whole collection of page tables, one for each "process", and whenever it decides that a particular process is going to run on a given CPU, it loads the process's page tables into that CPU's MMU (each CPU has its own set of page tables). The result is that each process sees its own virtual address space which looks the same regardless of which physical pages were free when the OS had to allocate memory for it. It never knows about the memory of any other process, since it cannot access physical memory directly.
Page tables are nested tree-like data structures stored in normal memory, written by the OS but read directly by hardware, so the format is fixed. They're "loaded" into the MMU by setting a special CPU control register to point to the top-level table. The CPU uses a cache called a TLB to remember lookups, so repeated accesses to the same few pages are much faster than scattered accesses, for TLB-miss reasons as well as the usual data cache reasons. It's common to see the term "TLB entry" used to refer to page table entries even when they aren't cached in the TLB.
And in case you worry that a process might just disable paging or try and modify the page tables: This is not allowed, since x86 implements privilege levels (called "rings"), and user code executes at a privilege level that's too low to allow it to modify the CPU's page tables.
20
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With
