Algorithm to remove vocal from sound track [closed]

Question

I want to remove vocals from mp3 sound tracks. I searched google, and tried few softwares but none of them are convincing. I am planning to read the mp3 file, get a waveform and remove the waveform that is above a specified limit.

do you have any suggestions on how to proceed.

-- Update

I just want code that can read mp3 file format. Are there any softwares??

Answer 1

This isn't so much an "algorithm" as a "trick" but it could be automated in code. It works mostly for stereo tracks with where the vocals are centered. If the vocals are centered, they manifest equally in both tracks. If you invert one of the tracks and then merge them back together, the wave forms of the center vocals cancel out and are virtually removed. You can do this manually with most good audio editors like audacity. It doesn't give you perfect results and the rest of the audio suffers a bit too but it makes for great karaoke tracks :)

Answer 2

Source: http://www.cdf.utoronto.ca/~csc209h/summer/a2/a2.html, written by Daniel Zingaro.

Sounds are waves of air pressure. When a sound is generated, a sound wave consisting of compressions (increases in pressure) and rarefactions (decreases in pressure) moves through the air. This is similar to what happens if you throw a stone into a pond: the water rises and falls in a repeating wave.

When a microphone records sound, it takes a measure of the air pressure and returns it as a value. These values are called samples and can be positive or negative corresponding to increases or decreases in air pressure. Each time the air pressure is recorded, we are sampling the sound. Each sample records the sound at an instant in time; the faster we sample, the more accurate is our representation of the sound. The sampling rate refers to how many times per second we sample the sound. For example, CD-quality sound uses a sampling rate of 44100 samples per second; sampling someone's voice for use in a VOIP conversation uses far less than this. Sampling rates of 11025 (voice quality), 22050, and 44100 (CD quality) are common...

For mono sounds (those with one sound channel), a sample is simply a positive or negative integer that represents the amount of compression in the air at the point the sample was taken. For stereo sounds (which we use in this assignment), a sample is actually made up of two integer values: one for the left speaker and one for the right...

Here's how the algorithm [to remove vocals] works.

• Copy the first 44 bytes verbatim from the input file to the output file. Those 44 bytes contain important header information that should not be modified.

• Next, treat the rest of the input file as a sequence of shorts. Take each pair of shorts left and right, and compute combined = (left - right) / 2. Write two copies of combined to the output file.

Why Does This Work?

For the curious, a brief explanation of the vocal-removal algorithm is in order. As you noticed from the algorithm, we are simply subtracting one channel from the other (and then dividing by 2 to keep the volume from getting too loud). So why does subtracting the left channel from the right channel magically remove vocals?

When music is recorded, it is sometimes the case that vocals are recorded by a single microphone, and that single vocal track is used for the vocals in both channels. The other instruments in the song are recorded by multiple microphones, so that they sound different in both channels. Subtracting one channel from the other takes away everything that is ``in common'' between those two channels which, if we're lucky, means removing the vocals.

Of course, things rarely work so well. Try your vocal remover on this badly-behaved wav file. Sure, the vocals are gone, but so is the body of the music! Apparently, some of the instruments were also recorded "centred", so that they are removed along with the vocals when channels are subtracted.