Why would I consider using an RTOS for my embedded project?

Question

First the background, specifics of my question will follow:

At the company that I work at the platform we work on is currently the Microchip PIC32 family using the MPLAB IDE as our development environment. Previously we've also written firmware for the Microchip dsPIC and TI MSP families for this same application. The firmware is pretty straightforward in that the code is split into three main modules: device control, data sampling, and user communication (usually a user PC). Device control is achieved via some combination of GPIO bus lines and at least one part needing SPI or I2C control. Data sampling is interrupt driven using a Timer module to maintain sample frequency and more SPI/I2C and GPIO bus lines to control the sampling hardware (ie. ADC). User communication is currently implemented via USB using the Microchip App Framework.

---

So now the question: given what I've described above, at what point would I consider employing an RTOS for my project? Currently I'm thinking of these possible trigger points as reasons to use an RTOS:

• Code complexity? The code base architecture/organization is still small enough that I can keep all the details in my head.
• Multitasking/Threading? Time-slicing the module execution via interrupts suffices for now for multitasking.
• Testing? Currently we don't do much formal testing or verification past the HW smoke test (something I hope to rectify in the near future).
• Communication? We currently use a custom packet format and a protocol that pretty much only does START, STOP, SEND DATA commands with data being a binary blob.
• Project scope? There is a possibility in the near future that we'll be getting a project to integrate our device into a larger system with the goal of taking that system to mass production. Currently all our projects have been experimental prototypes with quick turn-around of about a month, producing one or two units at a time.

What other points do you think I should consider? In your experience what convinced (or forced) you to consider using an RTOS vs just running your code on the base runtime? Pointers to additional resources about designing/programming for an RTOS is also much appreciated.

Answer 1

There are many many reasons you might want to use an RTOS. They are varied & the degree to which they apply to your situation is hard to say. (Note: I tend to think this way: RTOS implies hard real time which implies preemptive kernel...)

• Rate Monotonic Analysis (RMA) - if you want to use Rate Monotonic Analysis to ensure your timing deadlines will be met, you must use a pre-emptive scheduler

• Meet real-time deadlines - even without using RMA, with a priority-based pre-emptive RTOS, your scheduler can help ensure deadlines are met. Paradoxically, an RTOS will typically increase interrupt latency due to critical sections in the kernel where interrupts are usually masked

• Manage complexity -- definitely, an RTOS (or most OS flavors) can help with this. By allowing the project to be decomposed into independent threads or processes, and using OS services such as message queues, mutexes, semaphores, event flags, etc. to communicate & synchronize, your project (in my experience & opinion) becomes more manageable. I tend to work on larger projects, where most people understand the concept of protecting shared resources, so a lot of the rookie mistakes don't happen. But beware, once you go to a multi-threaded approach, things can become more complex until you wrap your head around the issues.

• Use of 3rd-party packages - many RTOSs offer other software components, such as protocol stacks, file systems, device drivers, GUI packages, bootloaders, and other middleware that help you build an application faster by becoming almost more of an "integrator" than a DIY shop.

• Testing - yes, definitely, you can think of each thread of control as a testable component with a well-defined interface, especially if a consistent approach is used (such as always blocking in a single place on a message queue). Of course, this is not a substitute for unit, integration, system, etc. testing.

• Robustness / fault tolerance - an RTOS may also provide support for the processor's MMU (in your PIC case, I don't think that applies). This allows each thread (or process) to run in its own protected space; threads / processes cannot "dip into" each others' memory and stomp on it. Even device regions (MMIO) might be off limits to some (or all) threads. Strictly speaking, you don't need an RTOS to exploit a processor's MMU (or MPU), but the 2 work very well hand-in-hand.

Generally, when I can develop with an RTOS (or some type of preemptive multi-tasker), the result tends to be cleaner, more modular, more well-behaved and more maintainable. When I have the option, I use one.

Be aware that multi-threaded development has a bit of a learning curve. If you're new to RTOS/multithreaded development, you might be interested in some articles on Choosing an RTOS, The Perils of Preemption and An Introduction to Preemptive Multitasking.

Lastly, even though you didn't ask for recommendations... In addition to the many numerous commercial RTOSs, there are free offerings (FreeRTOS being one of the most popular), and the Quantum Platform is an event-driven framework based on the concept of active objects which includes a preemptive kernel. There are plenty of choices, but I've found that having the source code (even if the RTOS isn't free) is advantageous, esp. when debugging.