Timeout when running xcodebuild tests under Xcode 6 via SSH

Question

I seem to be having issues with integrating Xcode6 with jenkins, I currently have this setup and working with Xcode 5.

With xcode 6 running remotely via SSH the simulator time-out, when I run locally it succeeds.

Command

xcodebuild -workspace PROJECTNAME.xcworkspace -scheme BGO_Tests -destination 'platform=iOS Simulator,name=iPhone 5s' -derivedDataPath ./Build clean test

2014-08-19 10:46:36.591 xcodebuild[33966:381f] iPhoneSimulator: Timed out waiting 120 seconds for >simulator to boot, current state is 1.

Testing failed: Test target BGO_Tests encountered an error (Timed out waiting 120 seconds for simulator to boot, current state is 1

Tested with recent Xcode 6 beta 6

Answer 1

Note: the device names changed in Xcode 7, so you no longer specify them using iPhone 5 (9.1 Simulator) but rather iPhone 5 (9.1).

Use xcrun instruments -s to get the current list of devices and then you can pre-launch it using:

xcrun instruments -w "iPhone 5 (9.1)" || echo "(Pre)Launched the simulator." 

---

Prelaunching

I got to a point where what I proposed down there wasn't working anymore. In addition to making the changes mentioned here, you need to launch the simulator xcodebuild is expecting BEFORE xcodebuild is ran:

# First get the UDID you need xcrun instruments -s  # Then launch it open -a "iOS Simulator" --args -CurrentDeviceUDID <sim device UDID>  # and wait some time.... sleep 5  # Then launch your unit tests xcodebuild [...] -destination 'platform=iOS Simulator,name=<device name matching the UDID>'  

Old post

This bug is fixed in Xcode 6.3 and above. If you are experiencing similar problems in newer Xcode, it's likely another bug.

Apple follow up regarding Bug ID# 18001199:

The context provided by LaunchDaemons is not supported for running GUI applications. The SSH service, and the default setup for Jenkins, are both implemented as LaunchDaemons. In earlier versions of Xcode 5 xcodebuild could run tests on the iOS simulator in this context, but that was never a supported configuration, and as you have noted that is no longer working as of Xcode 6.

Unlike LaunchDaemons, LaunchAgents provide a context where you can run GUI applications - if the user is logged in at the time, with a window server / Aqua session. Converting your Jenkins configuration from being a LaunchDaemon to being a LaunchAgent would avoid the reported issue. You can also use launchd for running tests on the iOS simulator from a SSH session, either by crafting a LaunchAgent and manually loading / starting that, or by using "launchctl submit”.

Ok, after some more digging around the comments around here (many thanks to Opal), I found out that launching the slave via JNLP instead works.

As many people mentioned, it is not currently possible to run the unit test over SSH, so you might want to turn towards the JNLP agent for now until Apple fixes it.

---

If connecting with JNLP still does not solve it, try the solution mentioned in this comment.

i.e.: Run these on command line:

DevToolsSecurity -enable

sudo dscl . -append /Groups/_developer GroupMembership "user-that-runs-the-sim"

security authorizationdb write system.privilege.taskport is-developer

See References here and here.

I've recently found out that if you install a new version of Xcode and do not launch it. The simulator might start timing out again. To solve this, I've had to manually launch Xcode, and install the additional tools it requested.

Answer 2

I ended up solving this on Xcode 5 by doing the steps here, essentially running:

sudo security authorizationdb write system.privilege.taskport allow 

This will eliminate one class of these authentication popups. You’ll also need to run:

sudo DevToolsSecurity -enable 

However, once I upgraded to Xcode 6, I now get an infinite hang when trying to run xcodebuild tests over SSH. They continue to run just fine as long as I'm logged into the console, and running them from the keyboard.