opengl - blending with previous contents of framebuffer

Question

I am rendering to a texture through a framebuffer object, and when I draw transparent primitives, the primitives are blended properly with other primitives drawn in that single draw step, but they are not blended properly with the previous contents of the framebuffer.

Is there a way to properly blend the contents of the texture with the new data coming in?

EDIT: More information requsted, I will attempt to explain more clearly;

The blendmode I am using is GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA. (I believe that is typically the standard blendmode)

I am creating an application that tracks mouse movement. It draws lines connecting the previous mouse position to the current mouse position, and as I do not want to draw the lines over again each frame, I figured I would draw to a texture, never clear the texture and then just draw a rectangle with that texture on it to display it.

This all works fine, except that when I draw shapes with alpha less than 1 onto the texture, it does not blend properly with the texture's previous contents. Let's say I have some black lines with alpha = .6 drawn onto the texture. A couple draw cycles later, I then draw a black circle with alpha = .4 over those lines. The lines "underneath" the circle are completely overwritten. Although the circle is not flat black (It blends properly with the white background) there are no "darker lines" underneath the circle as you would expect.

If I draw the lines and the circle in the same frame however, they blend properly. My guess is that the texture just does not blend with it's previous contents. It's like it's only blending with the glclearcolor. (Which, in this case is <1.0f, 1.0f, 1.0f, 1.0f>)

Answer 1

I think there are two possible problems here.

Remember that all of the overlay lines are blended twice here. Once when they are blended into the FBO texture, and again when the FBO texture is blended over the scene.

So the first possibility is that you don't have blending enabled when drawing one line over another in the FBO overlay. When you draw into an RGBA surface with blending off, the current alpha is simply written directly into the FBO overlay's alpha channel. Then later when you blend the whole FBO texture over the scene, that alpha makes your lines translucent. So if you have blending against "the world" but not between overlay elements, it is possible that no blending is happening.

Another related problem: when you blend one line over another in "standard" blend mode (src alpha, 1 - src alpha) in the FBO, the alpha channel of the "blended" part is going to contain a blend of the alphas of the two overlay elements. This is probably not what you want.

For example, if you draw two 50% alpha lines over each other in the overlay, to get the equivalent effect when you blit the FBO, you need the FBO's alpha to be...75%. (That is, 1 - (1-.5) * (1-0.5), which is what would happen if you just drew two 50% alpha lines over your scene. But when you draw the two 50% lines, you'll get 50% alpha in the FBO (a blend of 50% with...50%.

This brings up the final issue: by pre-mixing the lines with each other before you blend them over the world, you are changing the draw order. Whereas you might have had:

blend(blend(blend(background color, model), first line), second line);

now you will have

blend(blend(first line, second line), blend(background color, model)).

In other words, pre-mixing the overlay lines into an FBO changes the order of blending and thus changes the final look in a way you may not want.

First, the simple way to get around this: don't use an FBO. I realize this is a "go redesign your app" kind of answer, but using an FBO is not the cheapest thing, and modern GL cards are very good at drawing lines. So one option would be: instead of blending lines into an FBO, write the line geometry into a vertex buffer object (VBO). Simply extend the VBO a little bit each time. If you are drawing less than, say, 40,000 lines at a time, this will almost certainly be as fast as what you were doing before.

(One tip if you go this route: use glBufferSubData to write the lines in, not glMapBuffer - mapping can be expensive and doesn't work on sub-ranges on many drivers...better to just let the driver copy the few new vertices.)

If that isn't an option (for example, if you draw a mix of shape types or use a mix of GL state, such that "remembering" what you did is a lot more complex than just accumulating vertices) then you may want to change how you draw into the VBO.

Basically what you'll need to do is enable separate blending; initialize the overlay to black + 0% alpha (0,0,0,0) and blend by "standard blending" the RGB but additive blending the alpha channels. This still isn't quite correct for the alpha channel but it's generally a lot closer - without this, over-drawn areas will be too transparent.

Then, when drawing the FBO, use "pre-multiplied" alpha, that is, (one, one-minus-src-alph).

Here's why that last step is needed: when you draw into the FBO, you have already multiplied every draw call by its alpha channel (if blending is on). Since you are drawing over black, a green (0,1,0,0.5) line is now dark green (0,0.5,0,0.5). If alpha is on and you blend normally again, the alpha is reapplied and you'l have 0,0.25,0,0.5.). By simply using the FBO color as is, you avoid the second alpha multiplication.

This is sometimes called "pre-multiplied" alpha because the alpha has already been multiplied into the RGB color. In this case you want it to get correct results, but in other cases, programmers use it for speed. (By pre-multiplying, it removes a mult per pixel when the blend op is performed.)

Hope that helps! Getting blending right when the layers are not mixed in order gets really tricky, and separate blend isn't available on old hardware, so simply drawing the lines every time may be the path of least misery.