Multiple conditions in switch case?

Question

Can i use switch case to check multiple condition? like for example either or of the condition fulfilled it will do its case?

switch (conditionA or conditionB fullfilled)
  { //execute code }

Answer 1

Obviously, the question of how to execute code if either conditionA or conditionB is true can be trivially answered with if( conditionA || conditionB ), no switch statement necessary. And if a switch statement is for some reason a must-have, then the question can again be trivially answered by suggesting a case label fall through, as one of the other answers does.

I do not know whether the needs of the OP are fully covered by these trivial answers, but this question will be read by many people besides the OP, so I would like to present a more general solution which can solve many similar problems for which trivial answers simply won't do.

How to use a single switch statement to check the values of an arbitrary number of boolean conditions all at the same time.

It is hacky, but it may come in handy.

The trick is to convert the true/false value of each of your conditions to a bit, concatenate these bits into an int value, and then switch on the int value.

Here is some example code:

#define A_BIT (1 << 0)
#define B_BIT (1 << 1)
#define C_BIT (1 << 2)

switch( (conditionA? A_BIT : 0) | (conditionB? B_BIT : 0) | (conditionC? C_BIT : 0) )
{
     case 0:                     //none of the conditions holds true.
     case A_BIT:                 //condition A is true, everything else is false.
     case B_BIT:                 //condition B is true, everything else is false.
     case A_BIT + B_BIT:         //conditions A and B are true, C is false.
     case C_BIT:                 //condition C is true, everything else is false.
     case A_BIT + C_BIT:         //conditions A and C are true, B is false.
     case B_BIT + C_BIT:         //conditions B and C are true, A is false.
     case A_BIT + B_BIT + C_BIT: //all conditions are true.
     default: assert( FALSE );   //something went wrong with the bits.
}

Then, you can use case label fall through if you have either-or scenarios. For example:

switch( (conditionA? A_BIT : 0) | (conditionB? B_BIT : 0) | (conditionC? C_BIT : 0) )
{
     case 0:
         //none of the conditions is true.
         break;
     case A_BIT:
     case B_BIT:
     case A_BIT + B_BIT:
         //(either conditionA or conditionB is true,) and conditionC is false.
         break;
     case C_BIT:
         //condition C is true, everything else is false.
         break;
     case A_BIT + C_BIT:
     case B_BIT + C_BIT:
     case A_BIT + B_BIT + C_BIT:
         //(either conditionA or conditionB is true,) and conditionC is true.
         break;
     default: assert( FALSE );   //something went wrong with the bits.
}

.