Idiomatic way of performance evaluation?

Question

I am evaluating a network+rendering workload for my project.

The program continuously runs a main loop:

while (true) {
   doSomething()
   drawSomething()
   doSomething2()
   sendSomething()
}

The main loop runs more than 60 times per second.

I want to see the performance breakdown, how much time each procedure takes.

My concern is that if I print the time interval for every entrance and exit of each procedure,

It would incur huge performance overhead.

I am curious what is an idiomatic way of measuring the performance.

Printing of logging is good enough?

Answer 1

Generally: For repeated short things, you can just time the whole repeat loop. (But microbenchmarking is hard; easy to distort results unless you understand the implications of doing that; for very short things, throughput and latency are different, so measure both separately by making one iteration use the result of the previous or not. Also beware that branch prediction and caching can make something look fast in a microbenchmark when it would actually be costly if done one at a time between other work in a larger program. e.g. loop unrolling and lookup tables often look good because there's no pressure on I-cache or D-cache from anything else.)

Or if you insist on timing each separate iteration, record the results in an array and print later; you don't want to invoke heavy-weight printing code inside your loop.

This question is way too broad to say anything more specific.

Many languages have benchmarking packages that will help you write microbenchmarks of a single function. Use them. e.g. for Java, JMH makes sure the function under test is warmed up and fully optimized by the JIT, and all that jazz, before doing timed runs. And runs it for a specified interval, counting how many iterations it completes.

Beware common microbenchmark pitfalls:

• Failure to warm up code / data caches and stuff: page faults within the timed region for touching new memory, or code / data cache misses, that wouldn't be part of normal operation. (Example of noticing this effect: Performance: memset example of a wrong conclusion based on this mistake)

• Failure to give the CPU time to ramp up to max turbo: modern CPUs clock down to idle speeds to save power, only clocking up after a few milliseconds. (Or longer depending on the OS / HW).

  related: on modern x86, RDTSC counts reference cycles, not core clock cycles, so it's subject to the same CPU-frequency variation effects as wall-clock time.

• On modern CPUs with out-of-order execution, some things are too short to truly time meaningfully, see also this. Performance of a tiny block of assembly language (e.g. generated by a compiler for one function) can't be characterized by a single number, even if it doesn't branch or access memory (so no chance of mispredict or cache miss). It has latency from inputs to outputs, but different throughput if run repeatedly with independent inputs is higher. e.g. an add instruction on a Skylake CPU has 4/clock throughput, but 1 cycle latency. So dummy = foo(x) can be 4x faster than x = foo(x); in a loop. Floating-point instructions have higher latency than integer, so it's often a bigger deal. Memory access is also pipelined on most CPUs, so looping over an array (address for next load easy to calculate) is often much faster than walking a linked list (address for next load isn't available until the previous load completes).

  Obviously performance can differ between CPUs; in the big picture usually it's rare for version A to be faster on Intel, version B to be faster on AMD, but that can easily happen in the small scale. When reporting / recording benchmark numbers, always note what CPU you tested on.

• Related to the above and below points: you can't benchmark the * operator in C, for example. Some use-cases for it will compile very differently from others, e.g. tmp = foo * i; in a loop can often turn into tmp += foo (strength reduction), or if the multiplier is a constant power of 2 the compiler will just use a shift. The same operator in the source can compile to very different instructions, depending on surrounding code.

• You need to compile with optimization enabled, but you also need to stop the compiler from optimizing away the work, or hoisting it out of a loop. Make sure you use the result (e.g. print it or store it to a volatile) so the compiler has to produce it. For an array, volatile double sink = output[argc]; is a useful trick: the compiler doesn't know the value of argc so it has to generate the whole array, but you don't need to read the whole array or even call an RNG function. (Unless the compiler aggressively transforms to only calculate the one output selected by argc, but that tends not to be a problem in practice.)

  For inputs, use a random number or argc or something instead of a compile-time constant so your compiler can't do constant-propagation for things that won't be constants in your real use-case. In C you can sometimes use inline asm or volatile for this, e.g. the stuff this question is asking about. A good benchmarking package like Google Benchmark will include functions for this.

• If the real use-case for a function lets it inline into callers where some inputs are constant, or the operations can be optimized into other work, it's not very useful to benchmark it on its own.

• Big complicated functions with special handling for lots of special cases can look fast in a microbenchmark when you run them repeatedly, especially with the same input every time. In real life use-cases, branch prediction often won't be primed for that function with that input. Also, a massively unrolled loop can look good in a microbenchmark, but in real life it slows everything else down with its big instruction-cache footprint leading to eviction of other code.

Related to that last point: Don't tune only for huge inputs, if the real use-case for a function includes a lot of small inputs. e.g. a memcpy implementation that's great for huge inputs but takes too long to figure out which strategy to use for small inputs might not be good. It's a tradeoff; make sure it's good enough for large inputs (for an appropriate definition of "enough"), but also keep overhead low for small inputs.

Litmus tests:

• If you're benchmarking two functions in one program: if reversing the order of testing changes the results, your benchmark isn't fair. e.g. function A might only look slow because you're testing it first, with insufficient warm-up. example: Why is std::vector slower than an array? (it's not, whichever loop runs first has to pay for all the page faults and cache misses; the 2nd just zooms through filling the same memory.)

• Increasing the iteration count of a repeat loop should linearly increase the total time, and not affect the calculated time-per-call. If not, then you have non-negligible measurement overhead or your code optimized away (e.g. hoisted out of the loop and runs only once instead of N times).

• Vary other test parameters as a sanity check.

---

For C / C++, see also Simple for() loop benchmark takes the same time with any loop bound where I went into some more detail about microbenchmarking and using volatile or asm to stop important work from optimizing away with gcc/clang.