How can I make sense of the `else` clause of Python loops?

Question

Many Python programmers are probably unaware that the syntax of while loops and for loops includes an optional else: clause:

for val in iterable:
    do_something(val)
else:
    clean_up()

The body of the else clause is a good place for certain kinds of clean-up actions, and is executed on normal termination of the loop: I.e., exiting the loop with return or break skips the else clause; exiting after a continue executes it. I know this only because I just looked it up (yet again), because I can never remember when the else clause is executed.

Always? On "failure" of the loop, as the name suggests? On regular termination? Even if the loop is exited with return? I can never be entirely sure without looking it up.

I blame my persisting uncertainty on the choice of keyword: I find else incredibly unmnemonic for this semantics. My question is not "why is this keyword used for this purpose" (which I would probably vote to close, though only after reading the answers and comments), but how can I think about the else keyword so that its semantics make sense, and I can therefore remember it?

I'm sure there was a fair amount of discussion about this, and I can imagine that the choice was made for consistency with the try statement's else: clause (which I also have to look up), and with the goal of not adding to the list of Python's reserved words. Perhaps the reasons for choosing else will clarify its function and make it more memorable, but I'm after connecting name to function, not after historical explanation per se.

The answers to this question, which my question was briefly closed as a duplicate of, contain a lot of interesting back story. My question has a different focus (how to connect the specific semantics of else with the keyword choice), but I feel there should be a link to this question somewhere.

Answer 1

An if statement runs its else clause if its condition evaluates to false. Identically, a while loop runs the else clause if its condition evaluates to false.

This rule matches the behavior you described:

• In normal execution, the while loop repeatedly runs until the condition evaluates to false, and therefore naturally exiting the loop runs the else clause.
• When you execute a break statement, you exit out of the loop without evaluating the condition, so the condition cannot evaluate to false and you never run the else clause.
• When you execute a continue statement, you evaluate the condition again, and do exactly what you normally would at the beginning of a loop iteration. So, if the condition is true, you keep looping, but if it is false you run the else clause.
• Other methods of exiting the loop, such as return, do not evaluate the condition and therefore do not run the else clause.

for loops behave the same way. Just consider the condition as true if the iterator has more elements, or false otherwise.

Answer 2

Better to think of it this way: The else block will always be executed if everything goes right in the preceding for block such that it reaches exhaustion.

Right in this context will mean no exception, no break, no return. Any statement that hijacks control from for will cause the else block to be bypassed.

---

A common use case is found when searching for an item in an iterable, for which the search is either called off when the item is found or a "not found" flag is raised/printed via the following else block:

for items in basket:
    if isinstance(item, Egg):
        break
else:
    print("No eggs in basket")  

A continue does not hijack control from for, so control will proceed to the else after the for is exhausted.

Answer 3

When does an if execute an else? When its condition is false. It is exactly the same for the while/else. So you can think of while/else as just an if that keeps running its true condition until it evaluates false. A break doesn't change that. It just jumps out of the containing loop with no evaluation. The else is only executed if evaluating the if/while condition is false.

The for is similar, except its false condition is exhausting its iterator.

continue and break don't execute else. That isn't their function. The break exits the containing loop. The continue goes back to the top of the containing loop, where the loop condition is evaluated. It is the act of evaluating if/while to false (or for has no more items) that executes else and no other way.

Answer 4

This is what it essentially means:

for/while ...:
    if ...:
        break
if there was a break:
    pass
else:
    ...

It's a nicer way of writing of this common pattern:

found = False
for/while ...:
    if ...:
        found = True
        break
if not found:
    ...

The else clause will not be executed if there is a return because return leaves the function, as it is meant to. The only exception to that which you may be thinking of is finally, whose purpose is to be sure that it is always executed.

continue has nothing special to do with this matter. It causes the current iteration of the loop to end which may happen to end the entire loop, and clearly in that case the loop wasn't ended by a break.

try/else is similar:

try:
    ...
except:
    ...
if there was an exception:
    pass
else:
    ...

Answer 5

If you think of your loops as a structure similar to this (somewhat pseudo-code):

loop:
if condition then

   ... //execute body
   goto loop
else
   ...

it might make a little bit more sense. A loop is essentially just an if statement that is repeated until the condition is false. And this is the important point. The loop checks its condition and sees that it's false, thus executes the else (just like a normal if/else) and then the loop is done.

So notice that the else only get's executed when the condition is checked. That means that if you exit the body of the loop in the middle of execution with for example a return or a break, since the condition is not checked again, the else case won't be executed.

A continue on the other hand stops the current execution and then jumps back to check the condition of the loop again, which is why the else can be reached in this scenario.

Answer 6

My gotcha moment with the loop's else clause was when I was watching a talk by Raymond Hettinger, who told a story about how he thought it should have been called nobreak. Take a look at the following code, what do you think it would do?

for i in range(10):
    if test(i):
        break
    # ... work with i
nobreak:
    print('Loop completed')

What would you guess it does? Well, the part that says nobreak would only be executed if a break statement wasn't hit in the loop.

Answer 7

Usually I tend to think of a loop structure like this:

for item in my_sequence:
    if logic(item):
        do_something(item)
        break

To be a lot like a variable number of if/elif statements:

if logic(my_seq[0]):
    do_something(my_seq[0])
elif logic(my_seq[1]):
    do_something(my_seq[1])
elif logic(my_seq[2]):
    do_something(my_seq[2])
....
elif logic(my_seq[-1]):
    do_something(my_seq[-1])

In this case the else statement on the for loop works exactly like the else statement on the chain of elifs, it only executes if none of the conditions before it evaluate to True. (or break execution with return or an exception) If my loop does not fit this specification usually I choose to opt out of using for: else for the exact reason you posted this question: it is non-intuitive.

Answer 8

Others have already explained the mechanics of while/for...else, and the Python 3 language reference has the authoritative definition (see while and for), but here is my personal mnemonic, FWIW. I guess the key for me has been to break this down into two parts: one for understanding the meaning of the else in relation to the loop conditional, and one for understanding loop control.

I find it's easiest to start by understanding while...else:

while you have more items, do stuff, else if you run out, do this

The for...else mnemonic is basically the same:

for every item, do stuff, but else if you run out, do this

In both cases, the else part is only reached once there are no more items to process, and the last item has been processed in a regular manner (i.e. no break or return). A continue just goes back and sees if there are any more items. My mnemonic for these rules applies to both while and for:

when breaking or returning, there's nothing else to do,
and when I say continue, that's "loop back to start" for you

– with "loop back to start" meaning, obviously, the start of the loop where we check whether there are any more items in the iterable, so as far as the else is concerned, continue really plays no role at all.

Answer 9

In Test-driven development (TDD), when using the Transformation Priority Premise paradigm, you treat loops as a generalization of conditional statements.

This approach combines well with this syntax, if you consider only simple if/else (no elif) statements:

if cond:
    # 1
else:
    # 2

generalizes to:

while cond:  # <-- generalization
    # 1
else:
    # 2

nicely.

In other languages, TDD steps from a single case to cases with collections require more refactoring.

---

Here is an example from 8thlight blog:

In the linked article at 8thlight blog, the Word Wrap kata is considered: adding line breaks to strings (the s variable in the snippets below) to make them fit a given width (the length variable in the snippets below). At one point the implementation looks as follows (Java):

String result = "";
if (s.length() > length) {
    result = s.substring(0, length) + "\n" + s.substring(length);
} else {
    result = s;
}
return result;

and the next test, that currently fails is:

@Test
public void WordLongerThanTwiceLengthShouldBreakTwice() throws Exception {
    assertThat(wrap("verylongword", 4), is("very\nlong\nword"));
    }

So we have code that works conditionally: when a particular condition is met, a line break is added. We want to improve the code to handle multiple line breaks. The solution presented in the article proposes to apply the (if->while) transformation, however the author makes a comment that:

While loops can’t have else clauses, so we need to eliminate the else path by doing less in the if path. Again, this is a refactoring.

which forces to do more changes to the code in the context of one failing test:

String result = "";
while (s.length() > length) {
    result += s.substring(0, length) + "\n";
    s = s.substring(length);
}
result += s;

In TDD we want to write as less code as possible to make tests pass. Thanks to Python's syntax the following transformation is possible:

from:

result = ""
if len(s) > length:
    result = s[0:length] + "\n"
    s = s[length:]
else:
    result += s

to:

result = ""
while len(s) > length:
    result += s[0:length] + "\n"
    s = s[length:]
else:
    result += s

Answer 10

The way I see it, else: fires when you iterate past the end of the loop.

If you break or return or raise you don't iterate past the end of loop, you stop immeadiately, and thus the else: block won't run. If you continue you still iterate past the end of loop, since continue just skips to the next iteration. It doesn't stop the loop.