Google Protocol Buffers: parseDelimitedFrom and writeDelimitedTo for C++

Question

Sorry to ask this again, but could we please once and for all post some C++ functions that match the Java ones here? They don't seem to be getting added by google, and it is a quite a pain to write them yourself. Below answer using some of this and this.

Answer 1

Here are the two basic versions with boost asio. Notice that to make this work properly, technically, in the second version, one would need to look at how much data is in the buffer, work out how big the header was (VarInt is not a fixed size), but CodedInputStream has GetDirectBufferPointer, with a pointer to where it is, so from this pointer one could work out the remaining message size, compare it with the given message size, construct a new adjusted buffer for the remaining size, and do a asio synchronous read for the rest of the message. Below works as long as messages remain small (I guess around 1 kb or so). If someone has the missing bit, please speak up. Thanks.

writeDelimitedTo in C++:

boost::asio::streambuf request;
{
    std::ostream request_stream(&request);

    google::protobuf::io::OstreamOutputStream raw_output (&request_stream);
    google::protobuf::io::CodedOutputStream coded_output(&raw_output);

    coded_output.WriteVarint32(myProtoMsg.ByteSize());
    myProtoMsg.SerializeToCodedStream(&coded_output);
}
boost::asio::write(socket,request);

parseDelimitedFrom:

char buf[5000];
void Session::Read()
{
    boost::asio::async_read( 
        socket,
        boost::asio::buffer(buf),
        boost::asio::transfer_at_least(1),
        boost::bind(&Session::Handle_Read,shared_from_this(),boost::asio::placeholders::error));
}
void Session::Handle_Read(const boost::system::error_code& error)
{
    if (!error)
    {
        google::protobuf::io::ArrayInputStream arrayInputStream(buf,5000);
        google::protobuf::io::CodedInputStream codedInputStream(&arrayInputStream);
        uint32_t messageSize;
        codedInputStream.ReadVarint32(&messageSize);
        //Read more here
        MyProtoMsg myProtoMsg;
        myProtoMsg.ParseFromCodedStream(&codedInputStream);
    }
    Read();
}

EDIT: Above is a bit lazy (with "read more here"). Below is a complete parseDelimitedFrom. Any comments welcome.

NEW parseDelimitedFrom:

static void ReadMyVarint32(int& headerSize,int& messageSize,char buffer[])
{
    // Fast path:  We have enough bytes left in the buffer to guarantee that
    // this read won't cross the end, so we can skip the checks.
    char const* ptr = buffer;
    char b;
    uint32_t result;

    b = *(ptr++); result  = (b & 0x7F)      ; if (!(b & 0x80)) goto done;
    b = *(ptr++); result |= (b & 0x7F) <<  7; if (!(b & 0x80)) goto done;
    b = *(ptr++); result |= (b & 0x7F) << 14; if (!(b & 0x80)) goto done;
    b = *(ptr++); result |= (b & 0x7F) << 21; if (!(b & 0x80)) goto done;
    b = *(ptr++); result |=  b         << 28; if (!(b & 0x80)) goto done;

    // If the input is larger than 32 bits, we still need to read it all
    // and discard the high-order bits.
    for (int i = 0; i < 5; i++) {
    b = *(ptr++); if (!(b & 0x80)) goto done;
    }

    // We have overrun the maximum size of a varint (10 bytes).  Assume
    // the data is corrupt.
    headerSize = 0;
    messageSize = 0;

done:
    headerSize = ptr - buffer;
    messageSize = (int)result;
}

char buf[5000];
int receivedSize(0);
int missingSize(0);

void Session::Read()
{
    boost::asio::async_read( 
        socket,
        boost::asio::buffer(buf),
        boost::asio::transfer_at_least(1),
        boost::bind(&Session::Handle_Read,shared_from_this(),_1,_2));
}

void Session::Handle_Read(const boost::system::error_code& error,std::size_t bytes_transferred)
{
    if (!error)
    {
        int mybytes_transferred((int)bytes_transferred);
        if(missingSize == 0)
        {
            int headerSize, messageSize;
            ReadMyVarint32(headerSize,messageSize,buf);
            //std::cout << "Read new message: HeaderSize " << headerSize << " MessageSize " << messageSize << " Received: " << mybytes_transferred << std::endl;

            for(int i(0);i<mybytes_transferred-headerSize;++i)
                request[i] = buf[headerSize+i];

            missingSize = headerSize + messageSize - mybytes_transferred;
            receivedSize = mybytes_transferred - headerSize;
        }
        else
        {
            //std::cout << "Continue message: Read so far " << receivedSize << " Missing " << missingSize << " Received: " << mybytes_transferred << std::endl;
            for(int i(0);i<mybytes_transferred;++i)
                request[receivedSize+i] = buf[i];
            missingSize -= mybytes_transferred;
            receivedSize += mybytes_transferred;
        }
        if(missingSize < 0)
        {
            //Received too much, give up
            missingSize = 0;
            receivedSize = 0;
        }
        else if(missingSize == 0)
        {
            // Use your proto class here
            RequestWrapperPtr requestWrapperPtr(new RequestWrapper());
            if(requestWrapperPtr->ParseFromArray(request,receivedSize))
            {
                HandleRW(requestWrapperPtr);
            }
            else
            {
                // std::cout  << BaseString() << "Session Handle_Read: Failed to parse!";
            }
        }
        Read();
    }
}

Answer 2

I know this question has been answered, but the question is super old now, and updates have been made to the protobuf code repository since then.

Protobuf now has these functions under the header file here:

#include <google/protobuf/util/delimited_message_util.h>

You can check out the associated cpp file on the git repo here. I have tried out the functions with a boost socket and they work as expected.