Use OpenCL on AMD APU but use discrete GPU for the X server

Question

Is it possible to enable OpenCL on an A10-7800 without using it for the X server? I have a Linux box that I use for GPGPU programming. A discrete GEForce 740 card is used for both the X server and running OpenCL & Cuda programs I develop. I would also like the option of running OpenCL code on the APU's integrated GPU cores.

Everything I've read so far implies that if I want to use the APU for OpenCL, I have to install Catalyst and, AFAIK, that means using it for the X server. Is this true? Would there be an advantage to using the APU for my X server and using the GEForce solely for GPGPU code?

Answer 1

I had a similar goal, so I've built a system with AMD APU (4 regular cores + 6 GPUs) and Nvidia discrete graphics board. Sorry to say it wasn't easy to make it work, so I asked a question on the Ask Ubuntu forum, didn't get any answers, experimented a lot with hardware and software setup, and finally have posted my own answer to my question.

I'll describe my setup again here - who knows, what might happen with my auto-answered question on the Ask Ubuntu?

At first, I had to enable the integrated graphics hardware via a BIOS flag. This flag is called IGFX Multi-Monitor on my motherboard (ASUS A88X-PRO).

The second step was to find a right mix of a low-level graphics driver and high-level OpenCL implementation. The low-level driver for AMD processors is called AMD Catalyst and has a file name fglrx. I didn't install this driver from the Ubuntu software center - instead I used a version 15.302, directly downloaded from the AMD site. I had to install a significant number of prerequisites for this driver. The most important finding was that I had to skip running the aticonfig command after the fglrx installation - this command actually configures the X server to use this driver for graphics output, and I didn't want that.

Then I've installed the AMD SDK Ver 3.0 (release 130.136, earlier releases didn't work with my fglrx) - it's the OpenCL implementation from AMD. The clinfo command reports both CPUs and GPUs with correct number of cores now.

So, I have a hybrid AMD processor, supported by the OpenCL, with all the graphics output, supported by a discrete graphics card with Nvidia processor.

Good luck!