Producing good add with carry code from clang

Question

I'm trying to produce code (currently using clang++-3.8) that adds two numbers consisting of multiple machine words. To simplify things for the moment I'm only adding 128bit numbers, but I'd like to be able to generalise this.

First some typedefs:

typedef unsigned long long unsigned_word; typedef __uint128_t unsigned_128; 

And a "result" type:

struct Result {   unsigned_word lo;   unsigned_word hi; }; 

The first function, f, takes two pairs of unsigned words and returns a result, by as an intermediate step putting both of these 64 bit words into a 128 bit word before adding them, like so:

Result f (unsigned_word lo1, unsigned_word hi1, unsigned_word lo2, unsigned_word hi2) {   Result x;   unsigned_128 n1 = lo1 + (static_cast<unsigned_128>(hi1) << 64);   unsigned_128 n2 = lo2 + (static_cast<unsigned_128>(hi2) << 64);   unsigned_128 r1 = n1 + n2;   x.lo = r1 & ((static_cast<unsigned_128>(1) << 64) - 1);   x.hi = r1 >> 64;   return x; } 

This actually gets inlined quite nicely like so:

movq    8(%rsp), %rsi movq    (%rsp), %rbx addq    24(%rsp), %rsi adcq    16(%rsp), %rbx 

Now, instead I've written a simpler function using the clang multi-precision primatives, as below:

static Result g (unsigned_word lo1, unsigned_word hi1, unsigned_word lo2, unsigned_word hi2) {   Result x;   unsigned_word carryout;   x.lo = __builtin_addcll(lo1, lo2, 0, &carryout);   x.hi = __builtin_addcll(hi1, hi2, carryout, &x.carry);   return x; } 

This produces the following assembly:

movq    24(%rsp), %rsi movq    (%rsp), %rbx addq    16(%rsp), %rbx addq    8(%rsp), %rsi adcq    $0, %rbx 

In this case, there's an extra add. Instead of doing an ordinary add on the lo-words, then an adc on the hi-words, it just adds the hi-words, then adds the lo-words, then does an adc on the hi-word again with an argument of zero.

This may not look too bad, but when you try this with larger words (say 192bit, 256bit) you soon get a mess of ors and other instructions dealing with the carries up the chain, instead of a simple chain of add, adc, adc, ... adc.

The multi-precision primitives seem to be doing a terrible job at exactly what they're intended to do.

So what I'm looking for is code that I could generalise to any length (no need to do it, just enough so I can work out how to), which clang produces additions in an manner with is as efficient as what it does with it's built in 128 bit type (which unfortunately I can't easily generalise). I presume this should just a chain of adcs, but I'm welcome to arguments and code that it should be something else.

Answer 1

There is an intrinsic to do this: _addcarry_u64. However, only Visual Studio and ICC (at least VS 2013 and 2015 and ICC 13 and ICC 15) do this efficiently. Clang 3.7 and GCC 5.2 still don't produce efficient code with this intrinsic.

Clang in addition has a built-in which one would think does this, __builtin_addcll, but it does not produce efficient code either.

The reason Visual Studio does this is that it does not allow inline assembly in 64-bit mode so the compiler should provide a way to do this with an intrinsic (though Microsoft took their time implementing this).

Therefore, with Visual Studio use _addcarry_u64. With ICC use _addcarry_u64 or inline assembly. With Clang and GCC use inline assembly.

Note that since the Broadwell microarchitecture there are two new instructions: adcx and adox which you can access with the _addcarryx_u64 intrinsic . Intel's documentation for these intrinsics used to be different then the assembly produced by the compiler but it appears their documentation is correct now. However, Visual Studio still only appears to produce adcx with _addcarryx_u64 whereas ICC produces both adcx and adox with this intrinsic. But even though ICC produces both instructions it does not produce the most optimal code (ICC 15) and so inline assembly is still necessary.

Personally, I think the fact that a non-standard feature of C/C++, such as inline assembly or intrinsics, is required to do this is a weakness of C/C++ but others might disagree. The adc instruction has been in the x86 instruction set since 1979. I would not hold my breath on C/C++ compilers being able to optimally figure out when you want adc. Sure they can have built-in types such as __int128 but the moment you want a larger type that's not built-in you have to use some non-standard C/C++ feature such as inline assembly or intrinsics.

---

In terms of inline assembly code to do this I already posted a solution for 256-bit addition for eight 64-bit integers in register at multi-word addition using the carry flag.

Here is that code reposted.

#define ADD256(X1, X2, X3, X4, Y1, Y2, Y3, Y4) \  __asm__ __volatile__ ( \  "addq %[v1], %[u1] \n" \  "adcq %[v2], %[u2] \n" \  "adcq %[v3], %[u3] \n" \  "adcq %[v4], %[u4] \n" \  : [u1] "+&r" (X1), [u2] "+&r" (X2), [u3] "+&r" (X3), [u4] "+&r" (X4) \  : [v1]  "r" (Y1), [v2]  "r" (Y2), [v3]  "r" (Y3), [v4]  "r" (Y4))  

If you want to explicitly load the values from memory you can do something like this

//uint64_t dst[4] = {1,1,1,1}; //uint64_t src[4] = {1,2,3,4}; asm (      "movq (%[in]), %%rax\n"      "addq %%rax, %[out]\n"      "movq 8(%[in]), %%rax\n"      "adcq %%rax, 8%[out]\n"      "movq 16(%[in]), %%rax\n"      "adcq %%rax, 16%[out]\n"      "movq 24(%[in]), %%rax\n"      "adcq %%rax, 24%[out]\n"      : [out] "=m" (dst)      : [in]"r" (src)      : "%rax"      ); 

That produces nearlly identical assembly as from the following function in ICC

void add256(uint256 *x, uint256 *y) {     unsigned char c = 0;     c = _addcarry_u64(c, x->x1, y->x1, &x->x1);     c = _addcarry_u64(c, x->x2, y->x2, &x->x2);     c = _addcarry_u64(c, x->x3, y->x3, &x->x3);         _addcarry_u64(c, x->x4, y->x4, &x->x4); } 

I have limited experience with GCC inline assembly (or inline assembly in general - I usually use an assembler such as NASM) so maybe there are better inline assembly solutions.

---

So what I'm looking for is code that I could generalize to any length

To answer this question here is another solution using template meta programming. I used this same trick for loop unrolling. This produces optimal code with ICC. If Clang or GCC ever implement _addcarry_u64 efficiently this would be a good general solution.

#include <x86intrin.h> #include <inttypes.h>  #define LEN 4  // N = N*64-bit add e.g. 4=256-bit add, 3=192-bit add, ...  static unsigned char c = 0;  template<int START, int N> struct Repeat {     static void add (uint64_t *x, uint64_t *y) {         c = _addcarry_u64(c, x[START], y[START], &x[START]);         Repeat<START+1, N>::add(x,y);     } };  template<int N>     struct Repeat<LEN, N> {     static void add (uint64_t *x, uint64_t *y) {} };   void sum_unroll(uint64_t *x, uint64_t *y) {     Repeat<0,LEN>::add(x,y); } 

Assembly from ICC

xorl      %r10d, %r10d                                  #12.13 movzbl    c(%rip), %eax                                 #12.13 cmpl      %eax, %r10d                                   #12.13 movq      (%rsi), %rdx                                  #12.13 adcq      %rdx, (%rdi)                                  #12.13 movq      8(%rsi), %rcx                                 #12.13 adcq      %rcx, 8(%rdi)                                 #12.13 movq      16(%rsi), %r8                                 #12.13 adcq      %r8, 16(%rdi)                                 #12.13 movq      24(%rsi), %r9                                 #12.13 adcq      %r9, 24(%rdi)                                 #12.13 setb      %r10b 

Meta programming is a basic feature of assemblers so it's too bad C and C++ (except through template meta programming hacks) have no solution for this either (the D language does).

---

The inline assembly I used above which referenced memory was causing some problems in a function. Here is a new version which seems to work better

void foo(uint64_t *dst, uint64_t *src) {     __asm (         "movq (%[in]), %%rax\n"         "addq %%rax, (%[out])\n"         "movq 8(%[in]), %%rax\n"         "adcq %%rax, 8(%[out])\n"         "movq 16(%[in]), %%rax\n"         "addq %%rax, 16(%[out])\n"         "movq 24(%[in]), %%rax\n"         "adcq %%rax, 24(%[out])\n"         :         : [in] "r" (src), [out] "r" (dst)         : "%rax"     ); }