Pass all variables from one shell script to another?

Question

You have basically two options:

1. Make the variable an environment variable (export TESTVARIABLE) before executing the 2nd script.
2. Source the 2nd script, i.e. . test2.sh and it will run in the same shell. This would let you share more complex variables like arrays easily, but also means that the other script could modify variables in the source shell.

UPDATE:

To use export to set an environment variable, you can either use an existing variable:

A=10
# ...
export A

This ought to work in both bash and sh. bash also allows it to be combined like so:

export A=10

This also works in my sh (which happens to be bash, you can use echo $SHELL to check). But I don't believe that that's guaranteed to work in all sh, so best to play it safe and separate them.

Any variable you export in this way will be visible in scripts you execute, for example:

a.sh:

#!/bin/sh

MESSAGE="hello"
export MESSAGE
./b.sh

b.sh:

#!/bin/sh

echo "The message is: $MESSAGE"

Then:

$ ./a.sh
The message is: hello

The fact that these are both shell scripts is also just incidental. Environment variables can be passed to any process you execute, for example if we used python instead it might look like:

a.sh:

#!/bin/sh

MESSAGE="hello"
export MESSAGE
./b.py

b.py:

#!/usr/bin/python

import os

print 'The message is:', os.environ['MESSAGE']

Sourcing:

Instead we could source like this:

a.sh:

#!/bin/sh

MESSAGE="hello"

. ./b.sh

b.sh:

#!/bin/sh

echo "The message is: $MESSAGE"

Then:

$ ./a.sh
The message is: hello

This more or less "imports" the contents of b.sh directly and executes it in the same shell. Notice that we didn't have to export the variable to access it. This implicitly shares all the variables you have, as well as allows the other script to add/delete/modify variables in the shell. Of course, in this model both your scripts should be the same language (sh or bash). To give an example how we could pass messages back and forth:

a.sh:

#!/bin/sh

MESSAGE="hello"

. ./b.sh

echo "[A] The message is: $MESSAGE"

b.sh:

#!/bin/sh

echo "[B] The message is: $MESSAGE"

MESSAGE="goodbye"

Then:

$ ./a.sh
[B] The message is: hello
[A] The message is: goodbye

This works equally well in bash. It also makes it easy to share more complex data which you could not express as an environment variable (at least without some heavy lifting on your part), like arrays or associative arrays.

Fatal Error gave a straightforward possibility: source your second script! if you're worried that this second script may alter some of your precious variables, you can always source it in a subshell:

( . ./test2.sh )

The parentheses will make the source happen in a subshell, so that the parent shell will not see the modifications test2.sh could perform.

---

There's another possibility that should definitely be referenced here: use set -a.

From the POSIX set reference:

-a: When this option is on, the export attribute shall be set for each variable to which an assignment is performed; see the Base Definitions volume of IEEE Std 1003.1-2001, Section 4.21, Variable Assignment. If the assignment precedes a utility name in a command, the export attribute shall not persist in the current execution environment after the utility completes, with the exception that preceding one of the special built-in utilities causes the export attribute to persist after the built-in has completed. If the assignment does not precede a utility name in the command, or if the assignment is a result of the operation of the getopts or read utilities, the export attribute shall persist until the variable is unset.

From the Bash Manual:

-a: Mark variables and function which are modified or created for export to the environment of subsequent commands.

So in your case:

set -a
TESTVARIABLE=hellohelloheloo
# ...
# Here put all the variables that will be marked for export
# and that will be available from within test2 (and all other commands).
# If test2 modifies the variables, the modifications will never be
# seen in the present script!
set +a

./test2.sh

 # Here, even if test2 modifies TESTVARIABLE, you'll still have
 # TESTVARIABLE=hellohelloheloo

Observe that the specs only specify that with set -a the variable is marked for export. That is:

set -a
a=b
set +a
a=c
bash -c 'echo "$a"'

will echo c and not an empty line nor b (that is, set +a doesn't unmark for export, nor does it “save” the value of the assignment only for the exported environment). This is, of course, the most natural behavior.

Conclusion: using set -a/set +a can be less tedious than exporting manually all the variables. It is superior to sourcing the second script, as it will work for any command, not only the ones written in the same shell language.

There's actually an easier way than exporting and unsetting or sourcing again (at least in bash, as long as you're ok with passing the environment variables manually):

let a.sh be

#!/bin/bash
secret="winkle my tinkle"
echo Yo, lemme tell you \"$secret\", b.sh!
Message=$secret ./b.sh

and b.sh be

#!/bin/bash
echo I heard \"$Message\", yo

Observed output is

[rob@Archie test]$ ./a.sh
Yo, lemme tell you "winkle my tinkle", b.sh!
I heard "winkle my tinkle", yo

The magic lies in the last line of a.sh, where Message, for only the duration of the invocation of ./b.sh, is set to the value of secret from a.sh. Basically, it's a little like named parameters/arguments. More than that, though, it even works for variables like $DISPLAY, which controls which X Server an application starts in.

Remember, the length of the list of environment variables is not infinite. On my system with a relatively vanilla kernel, xargs --show-limits tells me the maximum size of the arguments buffer is 2094486 bytes. Theoretically, you're using shell scripts wrong if your data is any larger than that (pipes, anyone?)

In Bash if you export the variable within a subshell, using parentheses as shown, you avoid leaking the exported variables:

#!/bin/bash

TESTVARIABLE=hellohelloheloo
(
export TESTVARIABLE    
source ./test2.sh
)

The advantage here is that after you run the script from the command line, you won't see a $TESTVARIABLE leaked into your environment:

$ ./test.sh
hellohelloheloo
$ echo $TESTVARIABLE
                            #empty! no leak
$

Adding to the answer of Fatal Error, There is one more way to pass the variables to another shell script.

The above suggested solution have some drawbacks:

1. using Export : It will cause the variable to be present out of their scope which is not a good design practice.
2. using Source : It may cause name collisions or accidental overwriting of a predefined variable in some other shell script file which have sourced another file.

There is another simple solution avaiable for us to use. Considering the example posted by you,

test.sh

#!/bin/bash

TESTVARIABLE=hellohelloheloo
./test2.sh "$TESTVARIABLE"

test2.sh

#!/bin/bash

echo $1

output

hellohelloheloo

Also it is important to note that "" are necessary if we pass multiword strings. Taking one more example

master.sh

#!/bin/bash
echo in master.sh
var1="hello world"
sh slave1.sh $var1
sh slave2.sh "$var1"
echo back to master

slave1.sh

#!/bin/bash
echo in slave1.sh
echo value :$1

slave2.sh

#!/bin/bash
echo in slave2.sh
echo value : $1

output

in master.sh
in slave1.sh
value :"hello
in slave2.sh
value :"hello world"

It happens because of the reasons aptly described in this link