Importing excel files having variable headers

Question

I have the SSIS package, which will load the excel file into Database. I have created Excel Source task to map the excel column name to Database table column name and its working fine.

In rare case, We are receiving the excel file column name with some space (for example : Column name is "ABC" but we are receiving "ABC ") and which cause the mapping issue and SSIS got failed.

Is there any possible to trim the column name without opening the excel.

Note : Page name will be dynamic and Column position may change (eg: Column "ABC may exist in first row or second row or ..").

Answer 1

This has been documented well in MSDN , running through the steps similar to as @houseofsql mentioned

Step1:

Exclude column names in first row in excel connection, use sql command as data access mode

Step2: Alias column names in output column as matching your destination,

Select * from [Sheet1$A2:I] will select from second row

Finally Add destination as OLEDB destination

Answer 2

Is the file being created manually or automatically? In either case you could remove the header row (either programmatically or tell the people to delete it before saving the file) from the Excel file altogether. Once you do that, go into the Excel Connection Manager and find the box that indicates 'First row has column names'. If you can clear out that box then map the columns again to the destination that should solve your problem. You would never have to worry about a misspelled (or extra spaces in) the column names.

I think there is also an option in SSIS to skip the first row altogether but I cannot remember where that option is. If you can find that then just skip the first row of the Excel file. Same mappings still remain.

Thank you

Answer 3

First of all, my solution is based on @DrHouseofSQL and @Bhouse answers, so you have to read @DrHouseofSQL answer first then @BHouse answer then continue with this answer

Problem

Note : Page name will be dynamic and Column position may change (eg: Column "ABC may exist in first row or second row or ...

This situation is a little complex and can be solved using the following workaround:

Solution Overview

1. Add a script task before the data flow task that import the data
2. You have to use the script task to open the excel file and get the Worksheet name and the header row
3. Build the Query and store it in a variable
4. in the second Data Flow task you have to use the query stored above as source (Note that you have to set Delay Validation property to true)

Solution Details

1. First create an SSIS variable of type string (i.e. @[User::strQuery])
2. Add another variable that contains the Excel File Path (i.e. @[User::ExcelFilePath])
3. Add A Script Task, and select @[User::strQuery] as ReadWrite Variable, and @[User::ExcelFilePath] as ReadOnly Variable (in the script task window)
4. Set the Script Language to VB.Net and in the script editor window write the following script:

Note: you have to imports System.Data.OleDb

In the code below, we search the excel first 15 rows to find the header, you can increase the number if the header can be found after the 15 rows. Also i assumed that the columns range is from A to I

    m_strExcelPath = Dts.Variables.Item("ExcelFilePath").Value.ToString

    Dim strSheetname As String = String.Empty
    Dim intFirstRow As Integer = 0

    m_strExcelConnectionString = Me.BuildConnectionString()
    Try


        Using OleDBCon As New OleDbConnection(m_strExcelConnectionString)

            If OleDBCon.State <> ConnectionState.Open Then
                OleDBCon.Open()
            End If

            'Get all WorkSheets
            m_dtschemaTable = OleDBCon.GetOleDbSchemaTable(OleDbSchemaGuid.Tables,
                                                               New Object() {Nothing, Nothing, Nothing, "TABLE"})

            'Loop over work sheet to get the first one (the excel may contains temporary sheets or deleted ones

            For Each schRow As DataRow In m_dtschemaTable.Rows
                strSheetname = schRow("TABLE_NAME").ToString

                If Not strSheetname.EndsWith("_") AndAlso strSheetname.EndsWith("$") Then

                    Using cmd As New OleDbCommand("SELECT * FROM [" & strSheetname & "A1:I15]", OleDBCon)

                        Dim dtTable As New DataTable("Table1")


                        cmd.CommandType = CommandType.Text

                        Using daGetDataFromSheet As New OleDbDataAdapter(cmd)

                            daGetDataFromSheet.Fill(dtTable)

                            For intCount As Integer = 0 To 15

                                If Not String.IsNullOrEmpty(dtTable.Rows(intCount)(0).ToString) Then

                                    '+1 because datatable is zero based indexed, +1 because we want to start from the second row
                                    intFirstRow = intCount + 2

                                End If


                            Next



                        End Using

                        If intFirstRow = 0 Then Throw New Exception("header not found")

                    End Using

                    'when the first correct sheet is found there is no need to check others
                    Exit For

                End If
            Next

            OleDBCon.Close()

        End Using

    Catch ex As Exception
        Throw New Exception(ex.Message, ex)
    End Try


    Dts.Variables.Item("strQuery").Value = "SELECT * FROM [" & strSheetname & "A" & intFirstRow.ToString & ":I]"

    Dts.TaskResult = ScriptResults.Success
End Sub

5. Then you have to add an Excel connection manager, and choose the excel file that you want to import (just select a sample to define the metadata for the first time only)
6. Assign a default value of Select * from [Sheet1$A2:I] to the variable @[User::strQuery]
7. In the Data Flow Task add an Excel Source, choose SQL Command from variable, and select @[User::strQuery]
8. Go to the columns tab and name the columns in the same way that @BHouse suggested

Image taken from @BHouse answer

9. Set the DataFlow Task Delay Validation property to True
10. Add other components to DataFlow Task

UPDATE 1:

From the OP comments: sometimes excel with empty data will come.(i.e) we have only header row not not data... in that case it fails entire task

Solution:

If your excel file contains no data (only header) you have to do these steps:

1. Add an SSIS variable of type boolean *(i.e. @[User::ImportFile])
2. Add @[User::ImportFile] to the script task ReadWrite variables
3. In the Script Task check if the file contains rows
4. If yes Set @[User::ImportFile] = True, else @[User::ImportFile] = False
5. Double Click on the arrow (precedence constraint) that connect the script task to the DataFlow
6. Set its type to Constraint and Expression

7. Write the following expression

   @[User::ImportFile] == True
   

Note: The new Script Task code is:

    m_strExcelPath = Dts.Variables.Item("ExcelFilePath").Value.ToString

    Dim strSheetname As String = String.Empty
    Dim intFirstRow As Integer = 0

    m_strExcelConnectionString = Me.BuildConnectionString()
    Try


        Using OleDBCon As New OleDbConnection(m_strExcelConnectionString)

            If OleDBCon.State <> ConnectionState.Open Then
                OleDBCon.Open()
            End If

            'Get all WorkSheets
            m_dtschemaTable = OleDBCon.GetOleDbSchemaTable(OleDbSchemaGuid.Tables,
                                                               New Object() {Nothing, Nothing, Nothing, "TABLE"})

            'Loop over work sheet to get the first one (the excel may contains temporary sheets or deleted ones

            For Each schRow As DataRow In m_dtschemaTable.Rows
                strSheetname = schRow("TABLE_NAME").ToString

                If Not strSheetname.EndsWith("_") AndAlso strSheetname.EndsWith("$") Then

                    Using cmd As New OleDbCommand("SELECT * FROM [" & strSheetname & "A1:I15]", OleDBCon)

                        Dim dtTable As New DataTable("Table1")


                        cmd.CommandType = CommandType.Text

                        Using daGetDataFromSheet As New OleDbDataAdapter(cmd)

                            daGetDataFromSheet.Fill(dtTable)

                            For intCount As Integer = 0 To 15

                                If Not String.IsNullOrEmpty(dtTable.Rows(intCount)(0).ToString) Then

                                    '+1 because datatable is zero based indexed, +1 because we want to start from the second row
                                    intFirstRow = intCount + 2

                                End If


                            Next



                        End Using





                    End Using

                    'when the first correct sheet is found there is no need to check others
                    Exit For

                End If
            Next

            OleDBCon.Close()

        End Using

    Catch ex As Exception
        Throw New Exception(ex.Message, ex)
    End Try

                If intFirstRow = 0 OrElse _
                   intFirstRow > dtTable.Rows.Count Then

                    Dts.Variables.Item("ImportFile").Value = False

                Else

                    Dts.Variables.Item("ImportFile").Value = True

                End If                    

    Dts.Variables.Item("strQuery").Value = "SELECT * FROM [" & strSheetname & "A" & intFirstRow.ToString & ":I]"

    Dts.TaskResult = ScriptResults.Success
End Sub

UPDATE 2:

From the OP comments: is there any other work around available to process the data flow task without skipping all data flow task,Actually one of the task will log the filename and data count and all, which are missing here

Solution:

1. Just add another DATA FLOW task
2. Connect this dataflow with the script task using another connector and with the expression @[User::ImportFile] == False (same steps of the first connector)
3. In the DataFlow Task add a SCript Component as a Source
4. Create the Output columns you want to import to Logs
5. Create a Row that contains the information you need to import
6. Add the Log Destination

Or Instead of adding another Data Flow Task, you can add an Execute SQL Task to insert a row in the Log Table