Implement Array-like behavior in JavaScript without using Array

Question

Is there any way to create an array-like object in JavaScript, without using the built-in array? I'm specifically concerned with behavior like this:

var sup = new Array(5);
//sup.length here is 0
sup[0] = 'z3ero';
//sup.length here is 1
sup[1] = 'o3ne';
//sup.length here is 2
sup[4] = 'f3our';        
//sup.length here is 5

The particular behavior I'm looking at here is that sup.length changes without any methods being called. I understand from this question that the [] operator is overloaded in the case of arrays, and this accounts for this behavior. Is there a pure-javascript way to duplicate this behavior, or is the language not flexible enough for that?

According to the Mozilla docs, values returned by regex also do funky things with this index. Is this possible with plain javascript?

Answer 1

[] operator is the native way to access to object properties. It is not available in the language to override in order to change its behaviour.

If what you want is return computed values on the [] operator, you cannot do that in JavaScript since the language does not support the concept of computed property. The only solution is to use a method that will work the same as the [] operator.

MyClass.prototype.getItem = function(index)
{
    return {
        name: 'Item' + index,
        value: 2 * index
    };
}

If what you want is have the same behaviour as a native Array in your class, it is always possible to use native Array methods directly on your class. Internally, your class will store data just like a native array does but will keep its class state. jQuery does that to make the jQuery class have an array behaviour while retaining its methods.

MyClass.prototype.addItem = function(item)
{
    // Will add "item" in "this" as if it was a native array
    // it will then be accessible using the [] operator 
    Array.prototype.push.call(this, item);
}

Answer 2

Yes, you can subclass an array into an arraylike object easily in JavaScript:

var ArrayLike = function() {};
ArrayLike.prototype = [];
ArrayLike.prototype.shuffle = // ... and so on ...

You can then instantiate new array like objects:

var cards = new Arraylike;
cards.push('ace of spades', 'two of spades', 'three of spades', ... 
cards.shuffle();

Unfortunately, this does not work in MSIE. It doesn't keep track of the length property. Which rather deflates the whole thing.

The problem in more detail on Dean Edwards' How To Subclass The JavaScript Array Object. It later turned out that his workaround wasn't safe as some popup blockers will prevent it.

Update: It's worth mentioning Juriy "kangax" Zaytsev's absolutely epic post on the subject. It pretty much covers every aspect of this problem.

Answer 3

Now we have ECMAScript 2015 (ECMA-262 6th Edition; ES6), we have proxy objects, and they allow us to implement the Array behaviour in the language itself, something along the lines of:

function FakeArray() {
  const target = {};

  Object.defineProperties(target, {
    "length": {
      value: 0,
      writable: true
    },
    [Symbol.iterator]: {
      // http://www.ecma-international.org/ecma-262/6.0/#sec-array.prototype-@@iterator
      value: () => {
        let index = 0;

        return {
          next: () => ({
            done: index >= target.length,
            value: target[index++]
          })
        };
      }
    }
  });

  const isArrayIndex = function(p) {
    /* an array index is a property such that
       ToString(ToUint32(p)) === p and ToUint(p) !== 2^32 - 1 */
    const uint = p >>> 0;
    const s = uint + "";
    return p === s && uint !== 0xffffffff;
  };

  const p = new Proxy(target, {
    set: function(target, property, value, receiver) {
      // http://www.ecma-international.org/ecma-262/6.0/index.html#sec-array-exotic-objects-defineownproperty-p-desc
      if (property === "length") {
        // http://www.ecma-international.org/ecma-262/6.0/index.html#sec-arraysetlength
        const newLen = value >>> 0;
        const numberLen = +value;
        if (newLen !== numberLen) {
          throw RangeError();
        }
        const oldLen = target.length;
        if (newLen >= oldLen) {
          target.length = newLen;
          return true;
        } else {
          // this case gets more complex, so it's left as an exercise to the reader
          return false; // should be changed when implemented!
        }
      } else if (isArrayIndex(property)) {
        const oldLenDesc = Object.getOwnPropertyDescriptor(target, "length");
        const oldLen = oldLenDesc.value;
        const index = property >>> 0;
        if (index > oldLen && oldLenDesc.writable === false) {
          return false;
        }
        target[property] = value;
        if (index > oldLen) {
          target.length = index + 1;
        }
        return true;
      } else {
        target[property] = value;
        return true;
      }
    }
  });

  return p;
}

I can't guarantee this is actually totally correct, and it doesn't handle the case where you alter length to be smaller than its previous value (the behaviour there is a bit complex to get right; roughly it deletes properties so that the length property invariant holds), but it gives a rough outline of how you can implement it. It also doesn't mimic behaviour of [[Call]] and [[Construct]] on Array, which is another thing you couldn't do prior to ES6—it wasn't possible to have divergent behaviour between the two within ES code, though none of that is hard.

This implements the length property in the same way the spec defines it as working: it intercepts assignments to properties on the object, and alters the length property if it is an "array index".

Unlike what one can do with ES5 and getters, this allows one to get length in constant time (obviously, this still depends on the underlying property access in the VM being constant time), and the only case in which it provides non-constant time performance is the not implemented case when newLen - oldLen properties are deleted (and deletion is slow in most VMs!).

Answer 4

Is this what you're looking for?

Thing = function() {};
Thing.prototype.__defineGetter__('length', function() {
    var count = 0;
    for(property in this) count++;
    return count - 1; // don't count 'length' itself!
});

instance = new Thing;
console.log(instance.length); // => 0
instance[0] = {};
console.log(instance.length); // => 1
instance[1] = {};
instance[2] = {};
console.log(instance.length); // => 3
instance[5] = {};
instance.property = {};
instance.property.property = {}; // this shouldn't count
console.log(instance.length); // => 5

The only drawback is that 'length' will get iterated over in for..in loops as if it were a property. Too bad there isn't a way to set property attributes (this is one thing I really wish I could do).

Answer 5

The answer is: there's no way as of now. The array behavior is defined in ECMA-262 as behaving this way, and has explicit algorithms for how to deal with getting and setting of array properties (and not generic object properties). This somewhat dismays me =(.