How to reset cursor color in bash

Question

This happens to me on Linux, not on a Mac. When I use tput setaf and then tput sgr0, the cursor still remains in the previously selected colour, until I press return again. I can reset it the same way by just doing echo '', but that isn't ideal as it creates a new line for me. Using printf didn't work either.

How can I reset the cursor color in the shell?

Answer 1

tput sgr0

restore the settings to default colour - and it works fine for me (I don't need another echo).

To solve your situation I suggest to use this code:

tput setaf 2 && echo -en 'Name: ' && tput sgr0 && echo ""

Answer 2

Short answer

echo -n -e '\e[?0c'

---

Long answer

As of today, the current version of agetty (contained in util-linux 2.27.1 [util-linux is the linux package providing most core commands, like login, su, mount, more, kill - to name a few] - and you should have it if your linux kernel version is >=4.4) has a different behavior than described in the yet-to-be-updated kernel.org documentation (Software cursor for VGA).

Consider

echo -n -e '\e[?byte1;byte2;byte3c'

byte1:

+---------------+---------------+
|  high nibble  |   low nibble  |
+---+-----------+-----------+---+
|msb|           |           |lsb|
+---+---+---+---+---+---+---+---+
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+---+---+---+---+---+---+---+---+
                  |   |   |   |
                  |   |   |   +-+
                  |   |   |     |   These bits specify the 8
                  |   |   +-----+-> possible blinking HW carets
                  |   |         |   
                  |   +---------+
                  |
                  +---------------> When set, this bit enables SW
                                    caret instead of HW caret

byte2 (SW caret):

                +-----------------> A pretty useless mask applied
                |                   to bits in byte3
+---------------+---------------+
|  high nibble  |   low nibble  |
+---+-----------+-----------+---+
|msb|           |           |lsb|
+---+---+---+---+---+---+---+---+
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+---+---+---+---+---+---+---+---+

byte3 (SW caret):

+---------------+---------------+
|  high nibble  |   low nibble  |
+---+-----------+-----------+---+
|msb|           |           |lsb|
+---+---+---+---+---+---+---+---+
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+---+---+---+---+---+---+---+---+
  |   |   |   |
  |   |   |   +-------------------> Highlighting
  |   |   |
  |   |   +---------------------+
  |   |                         |
  |   +-------------------------+-> Color
  |                             |
  +-----------------------------+

Highlighting: highligths the character beneath the caret (e.g. changing it to white [true shiny white] instead of dark white [the light gray that is commonly the default for TTYs]).

Color: the color of the caret. Note that, compared to the usual order of ANSI color codes we all know and love, bits are reversed, so -for this triplet- the 7th is the Lsb while the 5th is the Msb.

So, while in the 70s ANSI defined the following color codes, setting a de-facto standard adopted universally for TTYs, miscellaneous linux terminals, consoles, and whatnot

000 (0) black
001 (1) red
010 (2) green
011 (3) yellow or dark yellow
100 (4) blue or dark blue
101 (5) magenta, purple or violet
110 (6) cyan or light blue
111 (7) white or dark white (light gray)

in this case we have the opposite

000 (0) black
100 (4) red
010 (2) green
110 (6) yellow or dark yellow
001 (1) blue or dark blue
101 (5) magenta, purple or violet
011 (3) cyan or light blue
111 (7) white or dark white (light gray)

(Octal value parenthesized)

So, here comes the list:

#Hardware carets (blinking and [dark ]white)
echo -n -e '\e[?0c' #default caret
echo -n -e '\e[?1c' #invisible caret
echo -n -e '\e[?2c' #underscore caret
echo -n -e '\e[?3c' #thicker underscore caret
echo -n -e '\e[?4c' #smaller block caret
echo -n -e '\e[?5c' #small block caret
echo -n -e '\e[?6c' #big block caret
echo -n -e '\e[?7c' #biggest block caret
#On my Linux machine, both 6 and 7 are the big rectangular full-size block caret

#Software carets (non-blinking and colored)
echo -n -e '\e[?16;0;0c'  #00001000 0 00000000 black (thus invisible on black background)
echo -n -e '\e[?16;0;128c'#00001000 0 10000000 red
echo -n -e '\e[?16;0;64c' #00001000 0 01000000 green
echo -n -e '\e[?16;0;192c'#00001000 0 11000000 yellow
echo -n -e '\e[?16;0;32c' #00001000 0 00100000 blue
echo -n -e '\e[?16;0;160c'#00001000 0 10100000 magenta
echo -n -e '\e[?16;0;96c' #00001000 0 01100000 cyan
echo -n -e '\e[?16;0;224c'#00001000 0 11100000 dim white
echo -n -e '\e[?16;0;16c' #00001000 0 00010000 black     + highlighting
echo -n -e '\e[?16;0;144c'#00001000 0 10010000 red       + highlighting
echo -n -e '\e[?16;0;80c' #00001000 0 01010000 green     + highlighting
echo -n -e '\e[?16;0;208c'#00001000 0 11010000 yellow    + highlighting
echo -n -e '\e[?16;0;48c' #00001000 0 00110000 blue      + highlighting
echo -n -e '\e[?16;0;176c'#00001000 0 10110000 magenta   + highlighting
echo -n -e '\e[?16;0;112c'#00001000 0 01110000 cyan      + highlighting
echo -n -e '\e[?16;0;240c'#00001000 0 11110000 dim white + highlighting