How to change the internal IP of Kubernetes worker nodes?

Question

I am trying to deploy a K8s cluster from scratch using Kelsey Hightower's Learn Kubernetes the Hard Way guide. In my case I am using Vagrant and VirtualBox.

Each of My Master and Workers have a DHCP network in eth0(10.0.2.x range) for pulling bits from the internet and a eth1 static range (10.10.10.x/24) for internal k8s communication.

 [vagrant@master-1 ~]$ kubectl get nodes -o wide
NAME       STATUS   ROLES    AGE   VERSION   INTERNAL-IP   EXTERNAL-IP   OS-IMAGE                KERNEL-VERSION              CONTAINER-RUNTIME
worker-1   Ready    <none>   32s   v1.12.0   10.0.2.15     <none>        CentOS Linux 7 (Core)   3.10.0-957.1.3.el7.x86_64   containerd://1.2.0-rc.0
worker-2   Ready    <none>   2s    v1.12.0   10.0.2.15     <none>        CentOS Linux 7 (Core)   3.10.0-957.1.3.el7.x86_64   containerd://1.2.0-rc.0

I initially did not have the flags -node-ip="10.10.10.x and -address="10.10.10.x" setup.

Upon adding - I did remove the nodes and restart the kubelet service hopefully to register the nodes again however it seems to not want to update.

== Following is a sample of the kubelet config:

/var/lib/kubelet/kubelet-config.yaml
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    enabled: true
  x509:
    clientCAFile: "/var/lib/kubernetes/ca.pem"
authorization:
  mode: Webhook
clusterDomain: "cluster.local"
clusterDNS:
  - "10.32.0.10"
podCIDR: "${POD_CIDR}"
resolvConf: "/run/systemd/resolve/resolv.conf"
runtimeRequestTimeout: "15m"
tlsCertFile: "/var/lib/kubelet/${HOSTNAME}.pem"
tlsPrivateKeyFile: "/var/lib/kubelet/${HOSTNAME}-key.pem"
EOF


/etc/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=containerd.service
Requires=containerd.service

[Service]
ExecStart=/usr/local/bin/kubelet \\
  --config=/var/lib/kubelet/kubelet-config.yaml \\
  --container-runtime=remote \\
  --container-runtime-endpoint=unix:///var/run/containerd/containerd.sock \\
  --image-pull-progress-deadline=2m \\
  --kubeconfig=/var/lib/kubelet/kubeconfig \\
  --network-plugin=cni \\
  --node-ip="$NODE_IP"
  --address="$NODE_IP"
  --register-node=true \\
  --v=2

and kube-api server:

[Service]
ExecStart=/usr/local/bin/kube-apiserver \\
  --advertise-address=${INTERNAL_IP} \\
  --allow-privileged=true \\
  --apiserver-count=3 \\
  --audit-log-maxage=30 \\
  --audit-log-maxbackup=3 \\
  --audit-log-maxsize=100 \\
  --audit-log-path=/var/log/audit.log \\
  --authorization-mode=Node,RBAC \\
  --bind-address=0.0.0.0 \\
  --client-ca-file=/var/lib/kubernetes/ca.pem \\
  --enable-admission-plugins=Initializers,NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \\
  --enable-swagger-ui=true \\
  --etcd-cafile=/var/lib/kubernetes/ca.pem \\
  --etcd-certfile=/var/lib/kubernetes/kubernetes.pem \\
  --etcd-keyfile=/var/lib/kubernetes/kubernetes-key.pem \\
  --etcd-servers=https://10.10.10.11:2379,https://10.10.10.12:2379 \\
  --event-ttl=1h \\
  --experimental-encryption-provider-config=/var/lib/kubernetes/encryption-config.yaml \\
  --kubelet-certificate-authority=/var/lib/kubernetes/ca.pem \\
  --kubelet-client-certificate=/var/lib/kubernetes/kubernetes.pem \\
  --kubelet-client-key=/var/lib/kubernetes/kubernetes-key.pem \\
  --kubelet-https=true \\
  --runtime-config=api/all \\
  --service-account-key-file=/var/lib/kubernetes/service-account.pem \\
  --service-cluster-ip-range=10.32.0.0/24 \\
  --service-node-port-range=30000-32767 \\
  --tls-cert-file=/var/lib/kubernetes/kubernetes.pem \\
  --tls-private-key-file=/var/lib/kubernetes/kubernetes-key.pem \\
  --v=2

Also in vagrant I believe eth0 is the NAT device as I see the 10.0.2.15 ip assigned to all vms (master/slaves)

[vagrant@worker-1 ~]$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:75:dc:3d brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global noprefixroute dynamic eth0
       valid_lft 84633sec preferred_lft 84633sec
    inet6 fe80::5054:ff:fe75:dc3d/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:24:a4:c2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.206/24 brd 192.168.0.255 scope global noprefixroute dynamic eth1
       valid_lft 3600sec preferred_lft 3600sec
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:76:22:4a brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.21/24 brd 10.10.10.255 scope global noprefixroute eth2
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe76:224a/64 scope link
       valid_lft forever preferred_lft forever
[vagrant@worker-1 ~]$

I guess the ask is how to update the internal-ip and external-ip post changes to the kubelet configuration

Answer 1

I edited /etc/systemd/system/kubelet.service.d/10-kubeadm.conf - adding the --node-ip flag to KUBELET_CONFIG_ARGS and restarted kubelet with:

systemctl daemon-reload
systemctl restart kubelet

And kubectl get nodes -o wide reported the new IP addresses immediately. It took a bit longer when I did it on the master - but it happened eventually.

Answer 2

What I did is similar to the answer from Michael, only I didn't edit /etc/systemd/system/kubelet.service.d/10-kubeadm.conf .

As suggested here it is stated (I emphasize some points)

The file that can contain user-specified flag overrides with KUBELET_EXTRA_ARGS is sourced from /etc/default/kubelet (for DEBs), or /etc/sysconfig/kubelet (for RPMs). KUBELET_EXTRA_ARGS is last in the flag chain and has the highest priority in the event of conflicting settings

So rather than changing files that are meant to be automatically changed (maybe due to upgrades or the like) I changed /etc/sysconfig/kubelet with KUBELET_EXTRA_ARGS='--node-ip 10.0.0.3' (the options that one can use can be seen with kubelet --help).

Then I did, as specified by other answers:

systemctl daemon-reload
systemctl restart kubelet
kubectl get nodes -o wide

And the internal Ip was changed accordingly.