You can convert to a quaternion by using q=cos(θ/2)+(uxˆi+uyˆj+uzˆk)sin(θ/2), where ux, uy and uz are the components of the rotation axis, θ is the rotation angle and ˆi, ˆj and ˆk are the components of the quaternion.
Quaternion q;
vector a = crossproduct(v1, v2);
q.xyz = a;
q.w = sqrt((v1.Length ^ 2) * (v2.Length ^ 2)) + dotproduct(v1, v2);
Don't forget to normalize q.
Richard is right about there not being a unique rotation, but the above should give the "shortest arc," which is probably what you need.
I came up with the solution that I believe Imbrondir was trying to present (albeit with a minor mistake, which was probably why sinisterchipmunk had trouble verifying it).
Given that we can construct a quaternion representing a rotation around an axis like so:
q.w == cos(angle / 2)
q.x == sin(angle / 2) * axis.x
q.y == sin(angle / 2) * axis.y
q.z == sin(angle / 2) * axis.z
And that the dot and cross product of two normalized vectors are:
dot == cos(theta)
cross.x == sin(theta) * perpendicular.x
cross.y == sin(theta) * perpendicular.y
cross.z == sin(theta) * perpendicular.z
Seeing as a rotation from u to v can be achieved by rotating by theta (the angle between the vectors) around the perpendicular vector, it looks as though we can directly construct a quaternion representing such a rotation from the results of the dot and cross products; however, as it stands, theta = angle / 2, which means that doing so would result in twice the desired rotation.
One solution is to compute a vector half-way between u and v, and use the dot and cross product of u and the half-way vector to construct a quaternion representing a rotation of twice the angle between u and the half-way vector, which takes us all the way to v!
There is a special case, where u == -v and a unique half-way vector becomes impossible to calculate. This is expected, given the infinitely many "shortest arc" rotations which can take us from u to v, and we must simply rotate by 180 degrees around any vector orthogonal to u (or v) as our special-case solution. This is done by taking the normalized cross product of u with any other vector not parallel to u.
Pseudo code follows (obviously, in reality the special case would have to account for floating point inaccuracies -- probably by checking the dot products against some threshold rather than an absolute value).
Also note that there is no special case when u == v (the identity quaternion is produced -- check and see for yourself).
// N.B. the arguments are _not_ axis and angle, but rather the
// raw scalar-vector components.
Quaternion(float w, Vector3 xyz);
Quaternion get_rotation_between(Vector3 u, Vector3 v)
{
// It is important that the inputs are of equal length when
// calculating the half-way vector.
u = normalized(u);
v = normalized(v);
// Unfortunately, we have to check for when u == -v, as u + v
// in this case will be (0, 0, 0), which cannot be normalized.
if (u == -v)
{
// 180 degree rotation around any orthogonal vector
return Quaternion(0, normalized(orthogonal(u)));
}
Vector3 half = normalized(u + v);
return Quaternion(dot(u, half), cross(u, half));
}
The orthogonal
function returns any vector orthogonal to the given vector. This implementation uses the cross product with the most orthogonal basis vector.
Vector3 orthogonal(Vector3 v)
{
float x = abs(v.x);
float y = abs(v.y);
float z = abs(v.z);
Vector3 other = x < y ? (x < z ? X_AXIS : Z_AXIS) : (y < z ? Y_AXIS : Z_AXIS);
return cross(v, other);
}
This is actually the solution presented in the accepted answer, and it seems to be marginally faster than the half-way vector solution (~20% faster by my measurements, though don't take my word for it). I'm adding it here in case others like myself are interested in an explanation.
Essentially, instead of calculating a quaternion using a half-way vector, you can calculate the quaternion which results in twice the required rotation (as detailed in the other solution), and find the quaternion half-way between that and zero degrees.
As I explained before, the quaternion for double the required rotation is:
q.w == dot(u, v)
q.xyz == cross(u, v)
And the quaternion for zero rotation is:
q.w == 1
q.xyz == (0, 0, 0)
Calculating the half-way quaternion is simply a matter of summing the quaternions and normalizing the result, just like with vectors. However, as is also the case with vectors, the quaternions must have the same magnitude, otherwise the result will be skewed towards the quaternion with the larger magnitude.
A quaternion constructed from the dot and cross product of two vectors will have the same magnitude as those products: length(u) * length(v)
. Rather than dividing all four components by this factor, we can instead scale up the identity quaternion. And if you were wondering why the accepted answer seemingly complicates matters by using sqrt(length(u) ^ 2 * length(v) ^ 2)
, it's because the squared length of a vector is quicker to calculate than the length, so we can save one sqrt
calculation. The result is:
q.w = dot(u, v) + sqrt(length_2(u) * length_2(v))
q.xyz = cross(u, v)
And then normalize the result. Pseudo code follows:
Quaternion get_rotation_between(Vector3 u, Vector3 v)
{
float k_cos_theta = dot(u, v);
float k = sqrt(length_2(u) * length_2(v));
if (k_cos_theta / k == -1)
{
// 180 degree rotation around any orthogonal vector
return Quaternion(0, normalized(orthogonal(u)));
}
return normalized(Quaternion(k_cos_theta + k, cross(u, v)));
}
The problem as stated is not well-defined: there is not a unique rotation for a given pair of vectors. Consider the case, for example, where u = <1, 0, 0> and v = <0, 1, 0>. One rotation from u to v would be a pi / 2 rotation around the z-axis. Another rotation from u to v would be a pi rotation around the vector <1, 1, 0>.
Why not represent the vector using pure quaternions? It's better if you normalize them first perhaps.
q1 = (0 ux uy uz)'
q2 = (0 vx vy vz)'
q1 qrot = q2
Pre-multiply with q1-1
qrot = q1-1 q2
where q1-1 = q1conj / qnorm
This is can be thought of as "left division".
Right division, which is not what you want is:
qrot,right = q2-1 q1
I'm not much good on Quaternion. However I struggled for hours on this, and could not make Polaris878 solution work. I've tried pre-normalizing v1 and v2. Normalizing q. Normalizing q.xyz. Yet still I don't get it. The result still didn't give me the right result.
In the end though I found a solution that did. If it helps anyone else, here's my working (python) code:
def diffVectors(v1, v2):
""" Get rotation Quaternion between 2 vectors """
v1.normalize(), v2.normalize()
v = v1+v2
v.normalize()
angle = v.dot(v2)
axis = v.cross(v2)
return Quaternion( angle, *axis )
A special case must be made if v1 and v2 are paralell like v1 == v2 or v1 == -v2 (with some tolerance), where I believe the solutions should be Quaternion(1, 0,0,0) (no rotation) or Quaternion(0, *v1) (180 degree rotation)
Some of the answers don't seem to consider possibility that cross product could be 0. Below snippet uses angle-axis representation:
//v1, v2 are assumed to be normalized
Vector3 axis = v1.cross(v2);
if (axis == Vector3::Zero())
axis = up();
else
axis = axis.normalized();
return toQuaternion(axis, ang);
The toQuaternion
can be implemented as follows:
static Quaternion toQuaternion(const Vector3& axis, float angle)
{
auto s = std::sin(angle / 2);
auto u = axis.normalized();
return Quaternion(std::cos(angle / 2), u.x() * s, u.y() * s, u.z() * s);
}
If you are using Eigen library, you can also just do:
Quaternion::FromTwoVectors(from, to)
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With