Copying a 1TB sparse file

Question

I got a sparse file of 1TB which stores actually 32MB data on Linux.

Is it possible to "efficiently" make a package to store the sparse file? The package should be unpacked to be a 1TB sparse file on another computer. Ideally, the "package" should be around 32MB.

Note: On possible solution is to use 'tar': https://wiki.archlinux.org/index.php/Sparse_file#Archiving_with_.60tar.27

However, for a 1TB sparse file, although the tar ball may be small, archiving the sparse file will take too long a time.

Edit 1

I tested the tar and gzip and the results are as follows (Note that this sparse file contains data of 0 byte).

$ du -hs sparse-1
0   sparse-1

$ ls -lha sparse-1
-rw-rw-r-- 1 user1 user1 1.0T 2012-11-03 11:17 sparse-1

$ time tar cSf sparse-1.tar sparse-1

real    96m19.847s
user    22m3.314s
sys     52m32.272s

$ time gzip sparse-1

real    200m18.714s
user    164m33.835s
sys     10m39.971s

$ ls -lha sparse-1*
-rw-rw-r-- 1 user1 user1 1018M 2012-11-03 11:17 sparse-1.gz
-rw-rw-r-- 1 user1 user1   10K 2012-11-06 23:13 sparse-1.tar

The 1TB file sparse-1 which contains 0 byte data can be archived by 'tar' to a 10KB tar ball or compressed by gzip to a ~1GB file. gzip takes around 2 times of the time than the time tar uses.

From the comparison, 'tar' seems better than gzip.

However, 96 minutes are too long for a sparse file that contains data of 0 byte.

Edit 2

rsync seems finish copying the file in more time than tar but less than gzip:

$ time rsync --sparse sparse-1 sparse-1-copy

real    124m46.321s
user    107m15.084s
sys     83m8.323s

$ du -hs sparse-1-copy 
4.0K    sparse-1-copy

Hence, tar + cp or scp should be faster than directly rsync for this extremely sparse file.

Edit 3

Thanks to @mvp for pointing out the SEEK_HOLE functionality in newer kernel. (I previously work on a 2.6.32 Linux kernel).

Note: bsdtar version >=3.0.4 is required (check here: http://ask.fclose.com/4/how-to-efficiently-archive-a-very-large-sparse-file?show=299#c299 ).

On a newer kernel and Fedora release (17), tar and cp handles the sparse file very efficiently.

[zma@office tmp]$ ls -lh pmem-1 

-rw-rw-r-- 1 zma zma 1.0T Nov  7 20:14 pmem-1
[zma@office tmp]$ time tar cSf pmem-1.tar pmem-1

real    0m0.003s
user    0m0.003s
sys 0m0.000s
[zma@office tmp]$ time cp pmem-1 pmem-1-copy

real    0m0.020s
user    0m0.000s
sys 0m0.003s
[zma@office tmp]$ ls -lh pmem*
-rw-rw-r-- 1 zma zma 1.0T Nov  7 20:14 pmem-1
-rw-rw-r-- 1 zma zma 1.0T Nov  7 20:15 pmem-1-copy
-rw-rw-r-- 1 zma zma  10K Nov  7 20:15 pmem-1.tar
[zma@office tmp]$ mkdir t
[zma@office tmp]$ cd t
[zma@office t]$ time tar xSf ../pmem-1.tar 

real    0m0.003s
user    0m0.000s
sys 0m0.002s
[zma@office t]$ ls -lha
total 8.0K
drwxrwxr-x   2 zma  zma  4.0K Nov  7 20:16 .
drwxrwxrwt. 35 root root 4.0K Nov  7 20:16 ..
-rw-rw-r--   1 zma  zma  1.0T Nov  7 20:14 pmem-1

I am using a 3.6.5 kernel:

[zma@office t]$ uname -a
Linux office.zhiqiangma.com 3.6.5-1.fc17.x86_64 #1 SMP Wed Oct 31 19:37:18 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Answer 1

Short answer: Use bsdtar or GNU tar (version 1.29 or later) to create archives, and GNU tar (version 1.26 or later) to extract them on another box.

Long answer: There are some requirements for this to work.

First, Linux must be at least kernel 3.1 (Ubuntu 12.04 or later would do), so it supports SEEK_HOLE functionality.

Then, you need tar utility that can support this syscall. GNU tar supports it since version 1.29 (released on 2016/05/16, it should be present by default since Ubuntu 18.04), or bsdtar since version 3.0.4 (available since Ubuntu 12.04) - install it using sudo apt-get install bsdtar.

While bsdtar (which uses libarchive) is awesome, unfortunately, it is not very smart when it comes to untarring - it stupidly requires to have at least as much free space on target drive as untarred file size, without regard to holes. GNU tar will untar such sparse archives efficiently and will not check this condition.

This is log from Ubuntu 12.10 (Linux kernel 3.5):

$ dd if=/dev/zero of=1tb seek=1T bs=1 count=1
1+0 records in
1+0 records out
1 byte (1 B) copied, 0.000143113 s, 7.0 kB/s

$ time bsdtar cvfz sparse.tar.gz 1tb 
a 1tb

real    0m0.362s
user    0m0.336s
sys 0m0.020s

# Or, use gnu tar if version is later than 1.29:
$ time tar cSvfz sparse-gnutar.tar.gz 1tb
1tb

real    0m0.005s
user    0m0.006s
sys 0m0.000s

$ ls -l
-rw-rw-r-- 1 autouser autouser 1099511627777 Nov  7 01:43 1tb
-rw-rw-r-- 1 autouser autouser           257 Nov  7 01:43 sparse.tar.gz
-rw-rw-r-- 1 autouser autouser           134 Nov  7 01:43 sparse-gnutar.tar.gz
$

Like I said above, unfortunately, untarring with bsdtar will not work unless you have 1TB free space. However, any version of GNU tar works just fine to untar such sparse.tar:

$ rm 1tb 
$ time tar -xvSf sparse.tar.gz 
1tb

real    0m0.031s
user    0m0.016s
sys 0m0.016s
$ ls -l
total 8
-rw-rw-r-- 1 autouser autouser 1099511627777 Nov  7 01:43 1tb
-rw-rw-r-- 1 autouser autouser           257 Nov  7 01:43 sparse.tar.gz