Logo Questions Linux Laravel Mysql Ubuntu Git Menu
 

Can't start hostednetwork

This happen after you disable via Control Panel -> network adapters -> right click button on the virtual connection -> disable

To fix that go to Device Manager (Windows-key + x + m on windows 8, Windows-key + x then m on windows 10), then open the network adapters tree , right click button on Microsoft Hosted Network Virtual Adapter and click on enable.

Try now with the command netsh wlan start hostednetwork with admin privileges. It should work.

Note: If you don't see the network adapter with name 'Microsoft Hosted Network Virtual Adapter' try on menu -> view -> show hidden devices in the Device Manager window.


Let alone enabling the network adapter under Device Manager may not help. The following helped me resolved the issue.

I tried Disabling and Enabling the Wifi Adapter (i.e. the actual Wifi device adapter not the virtual adapters) in Control Panel -> Network and Internet -> Network Connections altogether worked for me. The same can be done from the Device Manager too. This surely resets the adapter settings and for the Wifi Adapter and the Virtual Miniport adapters.

However, please make sure that the mode is set to allow as in the below example before you run the start command.

netsh wlan set hostednetwork mode=allow ssid=ssidOfUrChoice key=keyOfUrChoice

and after that run the command netsh wlan start hostednetwork.

Also once the usage is over with the Miniport adapter connection, it is a good practice to stop it using the following command.

netsh wlan stop hostednetwork

Hope it helps.


I encountered this problem on my laptop. I found the solution for this problem.

  1. Test this command in the command prompt "netsh wlan show driver".
  2. See Hosted network supported.
  3. If it is no,

Then do this

  1. Go to device manager.
  2. Click on view and press on "show hidden devices".
  3. Go down to the list of devices and expand the node "Network Devices" .
  4. Find an adapter with the name "Microsoft Hosted Network Virtual Adapter" and then right click on it.
  5. Select Enable
  6. This will enable the AdHoc created connection, it should appear in the network connections in Network and Sharing Center, if the AdHoc network connection is not appear then open elevated command prompt and apply this command "netsh wlan stop hostednetwork" without quotations.
  7. After this, the connection should appear. Then try starting your connection. It should work fine.

First off, when I went into cmd and typed "netsh wlan show drivers", I had a NO for hosted network support too. Doesn't matter, you can still do it. Just not in cmd.

I think this problem happens because they changed the way hosted networks work in windows 10. Don't use command line.

Just go on your pc to settings>Network>Mobile Hotspot and you should see all the necessary settings there. Turn it on, set up your network.

If it's still not working, go to Control panel>Network and Internet>Network and Sharing Center>Change Adapter Options> and then click on the properties of the network adapter that you want to share. Go to the sharing tab, and share that internet connection, selecting the name of the adapter you want to use to share it with.


First check if your wlan card support hosted network and if no update the card driver. Follow this steps

1) open cmd with administrative rights
2) on the black screen type: netsh wlan show driver | findstr Hosted
3) See Hosted network supported, if No then update drivers

enter image description here


Symptoms
You install an application that uses Microsoft Virtual WiFi technology on a computer that is running Windows 7 or Windows Server 2008 R2. However, the application does not work after the computer restarts. Additionally, you receive an error message that resembles the following:

The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation.

Cause
This issue occurs because the Virtual Wi-Fi filter driver does not create the Virtual Wi-Fi Adapter correctly when a PNP resource rebalance occurs during the startup process.

Notes
1.This issue may occur when a Plug and Play (PNP) resource rebalance occurs during the startup process. The PNP resource rebalance is usually triggered by a change to the hardware configuration.
2.If you open Device Manager when this issue occurs, you notice that the Virtual WiFi Adapter is not created.

If you can't restart your hostednetwork after rebooting the OS ,just Try this hotfix .It fixed my problem. Or try to figure it out by yourself according to the Symptoms and Cause mentioned at the start of my answer.