Best way to make a shell script daemon?

Question

Just backgrounding your script (./myscript &) will not daemonize it. See http://www.faqs.org/faqs/unix-faq/programmer/faq/, section 1.7, which describes what's necessary to become a daemon. You must disconnect it from the terminal so that SIGHUP does not kill it. You can take a shortcut to make a script appear to act like a daemon;

nohup ./myscript 0<&- &>/dev/null &

will do the job. Or, to capture both stderr and stdout to a file:

nohup ./myscript 0<&- &> my.admin.log.file &

Redirection explained (see bash redirection)

• 0<&- closes stdin
• &> file sends stdout and stderr to a file

However, there may be further important aspects that you need to consider. For example:

• You will still have a file descriptor open to the script, which means that the directory it's mounted in would be unmountable. To be a true daemon you should chdir("/") (or cd / inside your script), and fork so that the parent exits, and thus the original descriptor is closed.
• Perhaps run umask 0. You may not want to depend on the umask of the caller of the daemon.

For an example of a script that takes all of these aspects into account, see Mike S' answer.

Some of the top-upvoted answers here are missing some important parts of what makes a daemon a daemon, as opposed to just a background process, or a background process detached from a shell.

This http://www.faqs.org/faqs/unix-faq/programmer/faq/ describes what is necessary to be a daemon. And this Run bash script as daemon implements the setsid, though it misses the chdir to root.

The original poster's question was actually more specific than "How do I create a daemon process using bash?", but since the subject and answers discuss daemonizing shell scripts generally, I think it's important to point it out (for interlopers like me looking into the fine details of creating a daemon).

Here's my rendition of a shell script that would behave according to the FAQ. Set DEBUG to true to see pretty output (but it also exits immediately rather than looping endlessly):

#!/bin/bash
DEBUG=false

# This part is for fun, if you consider shell scripts fun- and I do.
trap process_USR1 SIGUSR1

process_USR1() {
    echo 'Got signal USR1'
    echo 'Did you notice that the signal was acted upon only after the sleep was done'
    echo 'in the while loop? Interesting, yes? Yes.'
    exit 0
}
# End of fun. Now on to the business end of things.

print_debug() {
    whatiam="$1"; tty="$2"
    [[ "$tty" != "not a tty" ]] && {
        echo "" >$tty
        echo "$whatiam, PID $$" >$tty
        ps -o pid,sess,pgid -p $$ >$tty
        tty >$tty
    }
}

me_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
me_FILE=$(basename $0)
cd /

#### CHILD HERE --------------------------------------------------------------------->
if [ "$1" = "child" ] ; then   # 2. We are the child. We need to fork again.
    shift; tty="$1"; shift
    $DEBUG && print_debug "*** CHILD, NEW SESSION, NEW PGID" "$tty"
    umask 0
    $me_DIR/$me_FILE XXrefork_daemonXX "$tty" "$@" </dev/null >/dev/null 2>/dev/null &
    $DEBUG && [[ "$tty" != "not a tty" ]] && echo "CHILD OUT" >$tty
    exit 0
fi

##### ENTRY POINT HERE -------------------------------------------------------------->
if [ "$1" != "XXrefork_daemonXX" ] ; then # 1. This is where the original call starts.
    tty=$(tty)
    $DEBUG && print_debug "*** PARENT" "$tty"
    setsid $me_DIR/$me_FILE child "$tty" "$@" &
    $DEBUG && [[ "$tty" != "not a tty" ]] && echo "PARENT OUT" >$tty
    exit 0
fi

##### RUNS AFTER CHILD FORKS (actually, on Linux, clone()s. See strace -------------->
                               # 3. We have been reforked. Go to work.
exec >/tmp/outfile
exec 2>/tmp/errfile
exec 0</dev/null

shift; tty="$1"; shift

$DEBUG && print_debug "*** DAEMON" "$tty"
                               # The real stuff goes here. To exit, see fun (above)
$DEBUG && [[ "$tty" != "not a tty" ]]  && echo NOT A REAL DAEMON. NOT RUNNING WHILE LOOP. >$tty

$DEBUG || {
while true; do
    echo "Change this loop, so this silly no-op goes away." >/dev/null
    echo "Do something useful with your life, young padawan." >/dev/null
    sleep 10
done
}

$DEBUG && [[ "$tty" != "not a tty" ]] && sleep 3 && echo "DAEMON OUT" >$tty

exit # This may never run. Why is it here then? It's pretty.
     # Kind of like, "The End" at the end of a movie that you
     # already know is over. It's always nice.

Output looks like this when DEBUG is set to true. Notice how the session and process group ID (SESS, PGID) numbers change:

<shell_prompt>$ bash blahd

*** PARENT, PID 5180
  PID  SESS  PGID
 5180  1708  5180
/dev/pts/6
PARENT OUT
<shell_prompt>$ 
*** CHILD, NEW SESSION, NEW PGID, PID 5188
  PID  SESS  PGID
 5188  5188  5188
not a tty
CHILD OUT

*** DAEMON, PID 5198
  PID  SESS  PGID
 5198  5188  5188
not a tty
NOT A REAL DAEMON. NOT RUNNING WHILE LOOP.
DAEMON OUT

# double background your script to have it detach from the tty
# cf. http://www.linux-mag.com/id/5981 
(./program.sh &) & 

Use your system's daemon facility, such as start-stop-daemon.

Otherwise, yes, there has to be a loop somewhere.

It really depends on what is the binary itself going to do.

For example I want to create some listener.

The starting Daemon is simple task :

lis_deamon :

#!/bin/bash

# We will start the listener as Deamon process
#    
LISTENER_BIN=/tmp/deamon_test/listener
test -x $LISTENER_BIN || exit 5
PIDFILE=/tmp/deamon_test/listener.pid

case "$1" in
      start)
            echo -n "Starting Listener Deamon .... "
            startproc -f -p $PIDFILE $LISTENER_BIN
            echo "running"
            ;;
          *)
            echo "Usage: $0 start"
            exit 1
            ;;
esac

this is how we start the daemon (common way for all /etc/init.d/ staff)

now as for the listener it self, It must be some kind of loop/alert or else that will trigger the script to do what u want. For example if u want your script to sleep 10 min and wake up and ask you how you are doing u will do this with the

while true ; do sleep 600 ; echo "How are u ? " ; done

Here is the simple listener that u can do that will listen for your commands from remote machine and execute them on local :

listener :

#!/bin/bash

# Starting listener on some port
# we will run it as deamon and we will send commands to it.
#
IP=$(hostname --ip-address)
PORT=1024
FILE=/tmp/backpipe
count=0
while [ -a $FILE ] ; do #If file exis I assume that it used by other program
  FILE=$FILE.$count
  count=$(($count + 1))
done

# Now we know that such file do not exist,
# U can write down in deamon it self the remove for those files
# or in different part of program

mknod $FILE p

while true ; do 
  netcat -l -s $IP -p $PORT < $FILE |/bin/bash > $FILE
done
rm $FILE

So to start UP it : /tmp/deamon_test/listener start

and to send commands from shell (or wrap it to script) :

test_host#netcat 10.184.200.22 1024
uptime
 20:01pm  up 21 days  5:10,  44 users,  load average: 0.62, 0.61, 0.60
date
Tue Jan 28 20:02:00 IST 2014
 punt! (Cntrl+C)

Hope this will help.

$ ( cd /; umask 0; setsid your_script.sh </dev/null &>/dev/null & ) &

Have a look at the daemon tool from the libslack package:

http://ingvar.blog.linpro.no/2009/05/18/todays-sysadmin-tip-using-libslack-daemon-to-daemonize-a-script/

On Mac OS X use a launchd script for shell daemon.