Batch File: ( was unexpected at this time

Question

I am getting this error:

( was unexpected at this time

The error occurs after accepting the value of a. I tried and checked for null values that could cause such a problem,, but was unsuccessful.

echo off
cls
title ~USB Wizard~
echo What do you want to do?
echo 1.Enable/Disable USB Storage Devices.
echo 2.Enable/Disable Writing Data onto USB Storage.
echo 3.~Yet to come~.

set "a=%globalparam1%"
goto :aCheck
:aPrompt
set /p "a=Enter Choice: "
:aCheck
if "%a%"=="" goto :aPrompt
echo %a%

IF %a%==2 (
title USB WRITE LOCK
echo What do you want to do?
echo 1.Apply USB Write Protection
echo 2.Remove USB Write Protection
::param1
set "param1=%globalparam2%"
goto :param1Check
:param1Prompt
set /p "param1=Enter Choice: "
:param1Check
if "%param1%"=="" goto :param1Prompt

if %param1%==1 (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000001 
echo USB Write is Locked!
)
if %param1%==2 (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000000
echo USB Write is Unlocked! 
)
)
pause

Answer 1

You are getting that error because when the param1 if statements are evaluated, param is always null due to being scoped variables without delayed expansion.

When parentheses are used, all the commands and variables within those parentheses are expanded. And at that time, param1 has no value making the if statements invalid. When using delayed expansion, the variables are only expanded when the command is actually called.

Also I recommend using if not defined command to determine if a variable is set.

@echo off
setlocal EnableExtensions EnableDelayedExpansion
cls
title ~USB Wizard~
echo What do you want to do?
echo 1.Enable/Disable USB Storage Devices.
echo 2.Enable/Disable Writing Data onto USB Storage.
echo 3.~Yet to come~.

set "a=%globalparam1%"
goto :aCheck
:aPrompt
set /p "a=Enter Choice: "
:aCheck
if not defined a goto :aPrompt
echo %a%

IF "%a%"=="2" (
    title USB WRITE LOCK
    echo What do you want to do?
    echo 1.Apply USB Write Protection
    echo 2.Remove USB Write Protection

    ::param1
    set "param1=%globalparam2%"
    goto :param1Check
    :param1Prompt
    set /p "param1=Enter Choice: "
    :param1Check
    if not defined param1 goto :param1Prompt
    echo !param1!

    if "!param1!"=="1" (
        REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000001 
        echo USB Write is Locked!
    )
    if "!param1!"=="2" (
        REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000000
        echo USB Write is Unlocked! 
    )
)
pause
endlocal