Arduino (Uno) Ethernet client connection fails after many client prints

Question

I'm using an Arduino Uno with Ethernet Shield.

After sending many HTTP requests, client.println(...), the client starts to fail when connecting. The time to failure appears to be random, and the sequence readout from the loop can vary anywhere between ~1000 and ~7000.

The error is not to do with the Ethernet Transmit Buffer overflowing (Following this advice)

Here is the code that is failing:

#include <Ethernet.h>
#include <SPI.h>

// Network constants
byte mac[] = {0x00, 0x23, 0xdf, 0x82, 0xd4, 0x01};
byte ip[] = {/*REDACTED*/};
byte server[] = {/*REDACTED*/};
int port = /*REDACTED*/;
Client client(server, port);

// State
int sequence;

void setup(){
    Ethernet.begin(mac, ip);
    Serial.begin(9600);
    sequence = 0;

    delay(1000);
}

void loop(){
    httpPut("/topic/:test/publish?sessionId=SESenanhygrp");
    Serial.println(sequence++);
}

void httpPut(char* url){
    if (!client.connect()) {
        Serial.println("EXCEPTION: during HTTP PUT. Could not connect");
        return;
    }

    client.print("PUT");
    client.print(" ");
    client.print(url);
    client.println(" HTTP/1.0");
    client.println();

    while(!client.available()){
        delay(1);
    }

    while(client.available()) {
        char c = client.read();
        Serial.print(c);
    }

    while(client.connected()){
        Serial.println("Waiting for server to disconnect");
    }

    client.stop();
}

The error occurs in the following segment

if (!client.connect()) {
    Serial.println("EXCEPTION: during HTTP PUT. Could not connect");
    return;
}

Answer 1

There is a bug in the Arduino Ethernet library in v22 (as discussed in Linux/Windows V0022/1.0 Ethernet problem SOLVED).

The solution for me was to use the Ethernet2 library (by Peter from tinker.it). The code needed minor tinkering, but everything appears to be working fine now. I've managed to get over 40000+ HTTP messages sent without any problems. (Occasionally single messages cannot be sent, but this error rate is less than 4%.)