What are the nuances of scope prototypal / prototypical inheritance in AngularJS?

Question

The API Reference Scope page says:

A scope can inherit from a parent scope.

The Developer Guide Scope page says:

A scope (prototypically) inherits properties from its parent scope.

• So, does a child scope always prototypically inherit from its parent scope?
• Are there exceptions?
• When it does inherit, is it always normal JavaScript prototypal inheritance?

Answer 1

I in no way want to compete with Mark's answer, but just wanted to highlight the piece that finally made everything click as someone new to Javascript inheritance and its prototype chain.

Only property reads search the prototype chain, not writes. So when you set

myObject.prop = '123';

It doesn't look up the chain, but when you set

myObject.myThing.prop = '123';

there's a subtle read going on within that write operation that tries to look up myThing before writing to its prop. So that's why writing to object.properties from the child gets at the parent's objects.

Answer 2

Quick answer:
A child scope normally prototypically inherits from its parent scope, but not always. One exception to this rule is a directive with scope: { ... } -- this creates an "isolate" scope that does not prototypically inherit. This construct is often used when creating a "reusable component" directive.

As for the nuances, scope inheritance is normally straightfoward... until you need 2-way data binding (i.e., form elements, ng-model) in the child scope. Ng-repeat, ng-switch, and ng-include can trip you up if you try to bind to a primitive (e.g., number, string, boolean) in the parent scope from inside the child scope. It doesn't work the way most people expect it should work. The child scope gets its own property that hides/shadows the parent property of the same name. Your workarounds are

1. define objects in the parent for your model, then reference a property of that object in the child: parentObj.someProp
2. use $parent.parentScopeProperty (not always possible, but easier than 1. where possible)
3. define a function on the parent scope, and call it from the child (not always possible)

New AngularJS developers often do not realize that ng-repeat, ng-switch, ng-view, ng-include and ng-if all create new child scopes, so the problem often shows up when these directives are involved. (See this example for a quick illustration of the problem.)

This issue with primitives can be easily avoided by following the "best practice" of always have a '.' in your ng-models – watch 3 minutes worth. Misko demonstrates the primitive binding issue with ng-switch.

Having a '.' in your models will ensure that prototypal inheritance is in play. So, use

<input type="text" ng-model="someObj.prop1">

<!--rather than
<input type="text" ng-model="prop1">`
-->

---

L-o-n-g answer:

JavaScript Prototypal Inheritance

Also placed on the AngularJS wiki: https://github.com/angular/angular.js/wiki/Understanding-Scopes

It is important to first have a solid understanding of prototypal inheritance, especially if you are coming from a server-side background and you are more familiar with class-ical inheritance. So let's review that first.

Suppose parentScope has properties aString, aNumber, anArray, anObject, and aFunction. If childScope prototypically inherits from parentScope, we have:

(Note that to save space, I show the anArray object as a single blue object with its three values, rather than an single blue object with three separate gray literals.)

If we try to access a property defined on the parentScope from the child scope, JavaScript will first look in the child scope, not find the property, then look in the inherited scope, and find the property. (If it didn't find the property in the parentScope, it would continue up the prototype chain... all the way up to the root scope). So, these are all true:

childScope.aString === 'parent string'
childScope.anArray[1] === 20
childScope.anObject.property1 === 'parent prop1'
childScope.aFunction() === 'parent output'

Suppose we then do this:

childScope.aString = 'child string'

The prototype chain is not consulted, and a new aString property is added to the childScope. This new property hides/shadows the parentScope property with the same name. This will become very important when we discuss ng-repeat and ng-include below.

Suppose we then do this:

childScope.anArray[1] = '22'
childScope.anObject.property1 = 'child prop1'

The prototype chain is consulted because the objects (anArray and anObject) are not found in the childScope. The objects are found in the parentScope, and the property values are updated on the original objects. No new properties are added to the childScope; no new objects are created. (Note that in JavaScript arrays and functions are also objects.)

Suppose we then do this:

childScope.anArray = [100, 555]
childScope.anObject = { name: 'Mark', country: 'USA' }

The prototype chain is not consulted, and child scope gets two new object properties that hide/shadow the parentScope object properties with the same names.

Takeaways:

• If we read childScope.propertyX, and childScope has propertyX, then the prototype chain is not consulted.
• If we set childScope.propertyX, the prototype chain is not consulted.

One last scenario:

delete childScope.anArray
childScope.anArray[1] === 22  // true

We deleted the childScope property first, then when we try to access the property again, the prototype chain is consulted.

---

Angular Scope Inheritance

The contenders:

• The following create new scopes, and inherit prototypically: ng-repeat, ng-include, ng-switch, ng-controller, directive with scope: true, directive with transclude: true.
• The following creates a new scope which does not inherit prototypically: directive with scope: { ... }. This creates an "isolate" scope instead.

Note, by default, directives do not create new scope -- i.e., the default is scope: false.

ng-include

Suppose we have in our controller:

$scope.myPrimitive = 50;
$scope.myObject    = {aNumber: 11};

And in our HTML:

<script type="text/ng-template" id="/tpl1.html">
<input ng-model="myPrimitive">
</script>
<div ng-include src="'/tpl1.html'"></div>

<script type="text/ng-template" id="/tpl2.html">
<input ng-model="myObject.aNumber">
</script>
<div ng-include src="'/tpl2.html'"></div>

Each ng-include generates a new child scope, which prototypically inherits from the parent scope.

Typing (say, "77") into the first input textbox causes the child scope to get a new myPrimitive scope property that hides/shadows the parent scope property of the same name. This is probably not what you want/expect.

Typing (say, "99") into the second input textbox does not result in a new child property. Because tpl2.html binds the model to an object property, prototypal inheritance kicks in when the ngModel looks for object myObject -- it finds it in the parent scope.

We can rewrite the first template to use $parent, if we don't want to change our model from a primitive to an object:

<input ng-model="$parent.myPrimitive">

Typing (say, "22") into this input textbox does not result in a new child property. The model is now bound to a property of the parent scope (because $parent is a child scope property that references the parent scope).

For all scopes (prototypal or not), Angular always tracks a parent-child relationship (i.e., a hierarchy), via scope properties $parent, $$childHead and $$childTail. I normally don't show these scope properties in the diagrams.

For scenarios where form elements are not involved, another solution is to define a function on the parent scope to modify the primitive. Then ensure the child always calls this function, which will be available to the child scope due to prototypal inheritance. E.g.,

// in the parent scope
$scope.setMyPrimitive = function(value) {
     $scope.myPrimitive = value;
}

Here is a sample fiddle that uses this "parent function" approach. (The fiddle was written as part of this answer: https://stackoverflow.com/a/14104318/215945.)

See also https://stackoverflow.com/a/13782671/215945 and https://github.com/angular/angular.js/issues/1267.

ng-switch

ng-switch scope inheritance works just like ng-include. So if you need 2-way data binding to a primitive in the parent scope, use $parent, or change the model to be an object and then bind to a property of that object. This will avoid child scope hiding/shadowing of parent scope properties.

See also AngularJS, bind scope of a switch-case?

ng-repeat

Ng-repeat works a little differently. Suppose we have in our controller:

$scope.myArrayOfPrimitives = [ 11, 22 ];
$scope.myArrayOfObjects    = [{num: 101}, {num: 202}]

And in our HTML:

<ul><li ng-repeat="num in myArrayOfPrimitives">
       <input ng-model="num">
    </li>
<ul>
<ul><li ng-repeat="obj in myArrayOfObjects">
       <input ng-model="obj.num">
    </li>
<ul>

For each item/iteration, ng-repeat creates a new scope, which prototypically inherits from the parent scope, but it also assigns the item's value to a new property on the new child scope. (The name of the new property is the loop variable's name.) Here's what the Angular source code for ng-repeat actually is:

childScope = scope.$new();  // child scope prototypically inherits from parent scope
...
childScope[valueIdent] = value;  // creates a new childScope property

If item is a primitive (as in myArrayOfPrimitives), essentially a copy of the value is assigned to the new child scope property. Changing the child scope property's value (i.e., using ng-model, hence child scope num) does not change the array the parent scope references. So in the first ng-repeat above, each child scope gets a num property that is independent of the myArrayOfPrimitives array:

This ng-repeat will not work (like you want/expect it to). Typing into the textboxes changes the values in the gray boxes, which are only visible in the child scopes. What we want is for the inputs to affect the myArrayOfPrimitives array, not a child scope primitive property. To accomplish this, we need to change the model to be an array of objects.

So, if item is an object, a reference to the original object (not a copy) is assigned to the new child scope property. Changing the child scope property's value (i.e., using ng-model, hence obj.num) does change the object the parent scope references. So in the second ng-repeat above, we have:

(I colored one line gray just so that it is clear where it is going.)

This works as expected. Typing into the textboxes changes the values in the gray boxes, which are visible to both the child and parent scopes.

See also Difficulty with ng-model, ng-repeat, and inputs and https://stackoverflow.com/a/13782671/215945

ng-controller

Nesting controllers using ng-controller results in normal prototypal inheritance, just like ng-include and ng-switch, so the same techniques apply. However, "it is considered bad form for two controllers to share information via $scope inheritance" -- http://onehungrymind.com/angularjs-sticky-notes-pt-1-architecture/ A service should be used to share data between controllers instead.

(If you really want to share data via controllers scope inheritance, there is nothing you need to do. The child scope will have access to all of the parent scope properties. See also Controller load order differs when loading or navigating)

directives

1. default (scope: false) - the directive does not create a new scope, so there is no inheritance here. This is easy, but also dangerous because, e.g., a directive might think it is creating a new property on the scope, when in fact it is clobbering an existing property. This is not a good choice for writing directives that are intended as reusable components.
2. scope: true - the directive creates a new child scope that prototypically inherits from the parent scope. If more than one directive (on the same DOM element) requests a new scope, only one new child scope is created. Since we have "normal" prototypal inheritance, this is like ng-include and ng-switch, so be wary of 2-way data binding to parent scope primitives, and child scope hiding/shadowing of parent scope properties.
3. scope: { ... } - the directive creates a new isolate/isolated scope. It does not prototypically inherit. This is usually your best choice when creating reusable components, since the directive cannot accidentally read or modify the parent scope. However, such directives often need access to a few parent scope properties. The object hash is used to set up two-way binding (using '=') or one-way binding (using '@') between the parent scope and the isolate scope. There is also '&' to bind to parent scope expressions. So, these all create local scope properties that are derived from the parent scope. Note that attributes are used to help set up the binding -- you can't just reference parent scope property names in the object hash, you have to use an attribute. E.g., this won't work if you want to bind to parent property parentProp in the isolated scope: <div my-directive> and scope: { localProp: '@parentProp' }. An attribute must be used to specify each parent property that the directive wants to bind to: <div my-directive the-Parent-Prop=parentProp> and scope: { localProp: '@theParentProp' }.
   Isolate scope's __proto__ references Object. Isolate scope's $parent references the parent scope, so although it is isolated and doesn't inherit prototypically from the parent scope, it is still a child scope.
   For the picture below we have
   <my-directive interpolated="{{parentProp1}}" twowayBinding="parentProp2"> and
   scope: { interpolatedProp: '@interpolated', twowayBindingProp: '=twowayBinding' }
   Also, assume the directive does this in its linking function: scope.someIsolateProp = "I'm isolated"
   
   For more information on isolate scopes see http://onehungrymind.com/angularjs-sticky-notes-pt-2-isolated-scope/
4. transclude: true - the directive creates a new "transcluded" child scope, which prototypically inherits from the parent scope. The transcluded and the isolated scope (if any) are siblings -- the $parent property of each scope references the same parent scope. When a transcluded and an isolate scope both exist, isolate scope property $$nextSibling will reference the transcluded scope. I'm not aware of any nuances with the transcluded scope.
   For the picture below, assume the same directive as above with this addition: transclude: true
   

This fiddle has a showScope() function that can be used to examine an isolate and transcluded scope. See the instructions in the comments in the fiddle.

---

Summary

There are four types of scopes:

1. normal prototypal scope inheritance -- ng-include, ng-switch, ng-controller, directive with scope: true
2. normal prototypal scope inheritance with a copy/assignment -- ng-repeat. Each iteration of ng-repeat creates a new child scope, and that new child scope always gets a new property.
3. isolate scope -- directive with scope: {...}. This one is not prototypal, but '=', '@', and '&' provide a mechanism to access parent scope properties, via attributes.
4. transcluded scope -- directive with transclude: true. This one is also normal prototypal scope inheritance, but it is also a sibling of any isolate scope.

For all scopes (prototypal or not), Angular always tracks a parent-child relationship (i.e., a hierarchy), via properties $parent and $$childHead and $$childTail.

Diagrams were generated with graphviz "*.dot" files, which are on github. Tim Caswell's "Learning JavaScript with Object Graphs" was the inspiration for using GraphViz for the diagrams.

Answer 3

I would like to add an example of prototypical inheritance with javascript to @Scott Driscoll answer. We'll be using classical inheritance pattern with Object.create() which is a part of EcmaScript 5 specification.

First we create "Parent" object function

function Parent(){

}

Then add a prototype to "Parent" object function

 Parent.prototype = {
 primitive : 1,
 object : {
    one : 1
   }
}

Create "Child" object function

function Child(){

}

Assign child prototype (Make child prototype inherit from parent prototype)

Child.prototype = Object.create(Parent.prototype);

Assign proper "Child" prototype constructor

Child.prototype.constructor = Child;

Add method "changeProps" to a child prototype, which will rewrite "primitive" property value in Child object and change "object.one" value both in Child and Parent objects

Child.prototype.changeProps = function(){
    this.primitive = 2;
    this.object.one = 2;
};

Initiate Parent (dad) and Child (son) objects.

var dad = new Parent();
var son = new Child();

Call Child (son) changeProps method

son.changeProps();

Check the results.

Parent primitive property did not change

console.log(dad.primitive); /* 1 */

Child primitive property changed (rewritten)

console.log(son.primitive); /* 2 */

Parent and Child object.one properties changed

console.log(dad.object.one); /* 2 */
console.log(son.object.one); /* 2 */

Working example here http://jsbin.com/xexurukiso/1/edit/

More info on Object.create here https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Global_Objects/Object/create