(This is both question and answer since it took quite a bit of digging to find the real answer.)
Symptom: viewWillAppear
, viewDidAppear
were not being called in my UIViewController.
Cause: Embedding a UINavigationController
or UITabBarController
(my case) in a UIViewController
somehow interrupts with the calling of these methods.
Solution: Call them manually in the UIViewController
that contains the aforementioned UINavigationController
/ UITabBarController
.
For example (assuming projectNavigationController
is your UINavigationController
):
-(void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; [projectNavigationController viewWillAppear:animated]; } -(void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; [projectNavigationController viewWillDisappear:animated]; } -(void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; [projectNavigationController viewDidAppear:animated]; } -(void)viewDidDisappear:(BOOL)animated { [super viewDidDisappear:animated]; [projectNavigationController viewDidDisappear:animated]; }
In my case I had an inner UITabBarController
and I called the methods accordingly and all was solved.
(Attribution on the solution: http://davidebenini.it/2009/01/03/viewwillappear-not-being-called-inside-a-uinavigationcontroller/)
In other words, if someone looks at another application or takes a phone call, then switches back to your app which was earlier on backgrounded, your UIViewController which was already visible when you left your app 'doesn't care' so to speak -- as far as it is concerned, it's never disappeared and it's still visible ...
There is a noticeable pause after row selection and before the new view is pushed. Some logging indicates that all of my code is reasonably quick, from row selection until the pushed controller's viewWillAppear . But then the time between viewWillAppear and viewDidAppear is logged at around 0.7 seconds.
viewWillAppear(_:)Always called after viewDidLoad (for obvious reasons, if you think about it), and just before the view appears on the screen to the user, viewWillAppear is called.
viewDidLoad() is only called once, when the view is loaded from a . storyboard file. viewWillAppear(_:) is called every time the view appears. In this simple app, that means it is only called once.
I'm going to go ahead and disagree with @St3fan, and use UIKit
as the counter-example.
However, the wisdom (or lack thereof), of embedding controllers in general should be guided by sane UI design principles.
The easiest counter-example is UINavigationControllers
embedded in UITabBarControllers
. These appear all over the place. Just off the top of my head, the iPod app on iPhone, and Contacts within the Phone app on iPhone.
I was curious enough to bother to check what they do with the views (add to the "super-controller" view or to the UIWindow
. I was pretty sure I was going to find that the sub-controller views were descendants of the super-controller views in the view hierarchy, which is contrary to St3fan's recommendation.
I whipped up a very quick iPhone app hooking everything up in InterfaceBuilder to create a UITabBarController
based app with two tabs, the first of which was a UINavigationController
with a plain ole UIViewController
as it's root view controller, and a 2nd tab with a plain old UIViewController
just so I had a 2nd tab to click later.
Sprinkle in some NSLog
statements to output the various UIView's
for the controllers we see this:
tabBarController.view = <UILayoutContainerView: 0x5b0dc80; ... navigationController.view = <UILayoutContainerView: 0x59469a0; ... rootViewController.view = <UIView: 0x594bb70; ... Superview: <UIViewControllerWrapperView: 0x594cc90; ... Superview: <UINavigationTransitionView: 0x594a420; ... Superview: <UILayoutContainerView: 0x59469a0; ... // navigationController.view Superview: <UIViewControllerWrapperView: 0x594b430; ... Superview: <UITransitionView: 0x5b0e110; ... Superview: <UILayoutContainerView: 0x5b0dc80; ... // tabBarController.view Superview: <UIWindow: 0x5942a30; ...
The lines prefixed with "Superview" were the output from walking up the rootViewController.view's
superview chain until hitting nil.
Then of course a quick glance at the call stack in a couple of places where viewDidDisappear
would get called on the root view controller.
First, the call stack when viewDidDisappear
is called on the root controller as a result of a new controller being pushed on to the stack:
-[RootController viewDidDisappear:] -[UINavigationController navigationTransitionView:didEndTransition:fromView:toView:] ...
Second, the call stack when another tab is selected in the top-most UITabBarController:
-[RootController viewDidDisappear:] -[UINavigationController viewDidDisappear:] -[UITabBarController transitionFromViewController:toViewController:transition:shouldSetSelected:]
So in all cases, it seems that Apple decided that controllers should be calling the various viewDidAppear
, etc methods on their embedded subcontrollers and that the view's should be embedded similarly. I think the OP hit this nail right on the head if we're to take UIKit
design as a good lead to follow.
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With