UDP packet greater than 1500 bytes dropped

Question

I'm developing a tftp client and server and I want to dynamically select the udp payload size to boost transfer performance.

I have tested it with two linux machines ( one has a gigabit ethernet card, the other a fast ethernet one ). I changed the MTU of the gigabit card to 2048 bytes and left the other to 1500.

I have used setsockopt(sockfd, IPPROTO_IP, IP_MTU_DISCOVER, &optval, sizeof(optval)) to set the MTU_DISCOVER flag to IP_PMTUDISC_DO.

From what I have read this option should set the DF bit to one and so it should be possible to find the minimum MTU of the network ( the MTU of the host that has the lowest MTU ). However this thing only gives me an error when I send a packet which size is bigger than the MTU of the machine from which I'm sending packets.

Also the other machine ( the server in this case ) doesn't receive the oversized packets ( the server has a MTU of 1500 ). All the UDP packets are dropped, the only way is to send packets of 1472 bytes.

Why the hosts do this? From what I have read, if I send a packet larger than MTU, the ip layer should fragment it.

Answer 1

I fail to see the problem. You are setting the "don't fragment" bit, and you send a package smaller than the sending host's MTU, but larger than the receiving host's MTU. Of course nobody will fragment here (doing so would violate the DF bit). Instead, the sending host should get an ICMP message back.

Edit: IP specifies that an ICMP error message type 3 (destination unreachable) code 4 (Fragmentation Required but DF Bit Is Set) is sent to the originating host at the point where the fragmentation would have occurred. The TCP layer handles this on its own for PMTU discovery. On connection-less sockets, Linux reports the error in the socket's error queue if the IP_RECVERR option is activated; see ip(7).