Spring Boot application as a Service

Question

The following works for springboot 1.3 and above:

As init.d service

The executable jar has the usual start, stop, restart, and status commands. It will also set up a PID file in the usual /var/run directory and logging in the usual /var/log directory by default.

You just need to symlink your jar into /etc/init.d like so

sudo link -s /var/myapp/myapp.jar /etc/init.d/myapp

OR

sudo ln -s ~/myproject/build/libs/myapp-1.0.jar /etc/init.d/myapp_servicename

After that you can do the usual

/etc/init.d/myapp start

Then setup a link in whichever runlevel you want the app to start/stop in on boot if so desired.

---

As a systemd service

To run a Spring Boot application installed in var/myapp you can add the following script in /etc/systemd/system/myapp.service:

[Unit]
Description=myapp
After=syslog.target

[Service]
ExecStart=/var/myapp/myapp.jar

[Install]
WantedBy=multi-user.target

---

NB: in case you are using this method, do not forget to make the jar file itself executable (with chmod +x) otherwise it will fail with error "Permission denied".

Reference

http://docs.spring.io/spring-boot/docs/current-SNAPSHOT/reference/html/deployment-install.html#deployment-service

What follows is the easiest way to install a Java application as system service in Linux.

Let's assume you are using systemd (which any modern distro nowadays does):

Firstly, create a service file in /etc/systemd/system named e.g. javaservice.service with this content:

[Unit]
Description=Java Service

[Service]
User=nobody
# The configuration file application.properties should be here:
WorkingDirectory=/data 
ExecStart=/usr/bin/java -Xmx256m -jar application.jar --server.port=8081
SuccessExitStatus=143
TimeoutStopSec=10
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

Secondly, notify systemd of the new service file:

systemctl daemon-reload

and enable it, so it runs on boot:

systemctl enable javaservice.service

Eventually, you can use the following commands to start/stop your new service:

systemctl start javaservice
systemctl stop javaservice
systemctl restart javaservice
systemctl status javaservice

Provided you are using systemd, this is the most non-intrusive and clean way to set up a Java application as system-service.

What I like especially about this solution is the fact that you don't need to install and configure any other software. The shipped systemd does all the work for you, and your service behaves like any other system service. I use it in production for a while now, on various distros, and it just works as you would expect.

Another plus is that, by using /usr/bin/java, you can easily add jvm paramters such as -Xmx256m.

Also read the systemd part in the official Spring Boot documentation: http://docs.spring.io/spring-boot/docs/current/reference/html/deployment-install.html

You could also use supervisord which is a very handy daemon, which can be used to easily control services. These services are defined by simple configuration files defining what to execute with which user in which directory and so forth, there are a zillion options. supervisord has a very simple syntax, so it makes a very good alternative to writing SysV init scripts.

Here a simple supervisord configuration file for the program you are trying to run/control. (put this into /etc/supervisor/conf.d/yourapp.conf)

/etc/supervisor/conf.d/yourapp.conf

[program:yourapp]
command=/usr/bin/java -jar /path/to/application.jar
user=usertorun
autostart=true
autorestart=true
startsecs=10
startretries=3
stdout_logfile=/var/log/yourapp-stdout.log
stderr_logfile=/var/log/yourapp-stderr.log

To control the application you would need to execute supervisorctl, which will present you with a prompt where you could start, stop, status yourapp.

CLI

# sudo supervisorctl
yourapp             RUNNING   pid 123123, uptime 1 day, 15:00:00
supervisor> stop yourapp
supervisor> start yourapp

If the supervisord daemon is already running and you've added the configuration for your serivce without restarting the daemon you can simply do a reread and update command in the supervisorctl shell.

This really gives you all the flexibilites you would have using SysV Init scripts, but easy to use and control. Take a look at the documentation.

I just got around to doing this myself, so the following is where I am so far in terms of a CentOS init.d service controller script. It's working quite nicely so far, but I'm no leet Bash hacker, so I'm sure there's room for improvement, so thoughts on improving it are welcome.

First of all, I have a short config script /data/svcmgmt/conf/my-spring-boot-api.sh for each service, which sets up environment variables.

#!/bin/bash
export JAVA_HOME=/opt/jdk1.8.0_05/jre
export APP_HOME=/data/apps/my-spring-boot-api
export APP_NAME=my-spring-boot-api
export APP_PORT=40001

I'm using CentOS, so to ensure that my services are started after a server restart, I have a service control script in /etc/init.d/my-spring-boot-api:

#!/bin/bash
# description: my-spring-boot-api start stop restart
# processname: my-spring-boot-api
# chkconfig: 234 20 80

. /data/svcmgmt/conf/my-spring-boot-api.sh

/data/svcmgmt/bin/spring-boot-service.sh $1

exit 0

As you can see, that calls the initial config script to set up environment variables and then calls a shared script which I use for restarting all of my Spring Boot services. That shared script is where the meat of it all can be found:

#!/bin/bash

echo "Service [$APP_NAME] - [$1]"

echo "    JAVA_HOME=$JAVA_HOME"
echo "    APP_HOME=$APP_HOME"
echo "    APP_NAME=$APP_NAME"
echo "    APP_PORT=$APP_PORT"

function start {
    if pkill -0 -f $APP_NAME.jar > /dev/null 2>&1
    then
        echo "Service [$APP_NAME] is already running. Ignoring startup request."
        exit 1
    fi
    echo "Starting application..."
    nohup $JAVA_HOME/bin/java -jar $APP_HOME/$APP_NAME.jar \
        --spring.config.location=file:$APP_HOME/config/   \
        < /dev/null > $APP_HOME/logs/app.log 2>&1 &
}

function stop {
    if ! pkill -0 -f $APP_NAME.jar > /dev/null 2>&1
    then
        echo "Service [$APP_NAME] is not running. Ignoring shutdown request."
        exit 1
    fi

    # First, we will try to trigger a controlled shutdown using 
    # spring-boot-actuator
    curl -X POST http://localhost:$APP_PORT/shutdown < /dev/null > /dev/null 2>&1

    # Wait until the server process has shut down
    attempts=0
    while pkill -0 -f $APP_NAME.jar > /dev/null 2>&1
    do
        attempts=$[$attempts + 1]
        if [ $attempts -gt 5 ]
        then
            # We have waited too long. Kill it.
            pkill -f $APP_NAME.jar > /dev/null 2>&1
        fi
        sleep 1s
    done
}

case $1 in
start)
    start
;;
stop)
    stop
;;
restart)
    stop
    start
;;
esac
exit 0

When stopping, it will attempt to use Spring Boot Actuator to perform a controlled shutdown. However, in case Actuator is not configured or fails to shut down within a reasonable time frame (I give it 5 seconds, which is a bit short really), the process will be killed.

Also, the script makes the assumption that the java process running the appllication will be the only one with "my-spring-boot-api.jar" in the text of the process details. This is a safe assumption in my environment and means that I don't need to keep track of PIDs.

If you want to use Spring Boot 1.2.5 with Spring Boot Maven Plugin 1.3.0.M2, here's out solution:

<parent>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-parent</artifactId>
    <version>1.2.5.RELEASE</version>
</parent>

<build>
    <plugins>
        <plugin>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-maven-plugin</artifactId>
            <version>1.3.0.M2</version>
            <configuration>
                <executable>true</executable>
            </configuration>
        </plugin>
    </plugins>
</build>

<pluginRepositories>
    <pluginRepository>
        <id>spring-libs-milestones</id>
        <url>http://repo.spring.io/libs-milestone</url>
    </pluginRepository> 
</pluginRepositories>

Then compile as ususal: mvn clean package, make a symlink ln -s /.../myapp.jar /etc/init.d/myapp, make it executable chmod +x /etc/init.d/myapp and start it service myapp start (with Ubuntu Server)

I know this is an older question, but I wanted to present yet another way which is the appassembler-maven-plugin. Here's the relevant part from my POM that includes a lot of additional option values we found useful:

<plugin>
    <groupId>org.codehaus.mojo</groupId>
    <artifactId>appassembler-maven-plugin</artifactId>
    <configuration>
        <generateRepository>true</generateRepository>
        <repositoryLayout>flat</repositoryLayout>
        <useWildcardClassPath>true</useWildcardClassPath>
        <includeConfigurationDirectoryInClasspath>true</includeConfigurationDirectoryInClasspath>
        <configurationDirectory>config</configurationDirectory>
        <target>${project.build.directory}</target>
        <daemons>
            <daemon>
                <id>${installer-target}</id>
                <mainClass>${mainClass}</mainClass>
                <commandLineArguments>
                    <commandLineArgument>--spring.profiles.active=dev</commandLineArgument>
                    <commandLineArgument>--logging.config=${rpmInstallLocation}/config/${installer-target}-logback.xml</commandLineArgument>
                </commandLineArguments>
                <platforms>
                    <platform>jsw</platform>
                </platforms>
                <generatorConfigurations>
                    <generatorConfiguration>
                        <generator>jsw</generator>
                        <includes>
                            <include>linux-x86-64</include>
                        </includes>
                        <configuration>
                            <property>
                                <name>wrapper.logfile</name>
                                <value>logs/${installer-target}-wrapper.log</value>
                            </property>
                            <property>
                                <name>wrapper.logfile.maxsize</name>
                                <value>5m</value>
                            </property>
                            <property>
                                <name>run.as.user.envvar</name>
                                <value>${serviceUser}</value>
                            </property>
                            <property>
                                <name>wrapper.on_exit.default</name>
                                <value>RESTART</value>
                            </property>
                        </configuration>
                    </generatorConfiguration>
                </generatorConfigurations>
                <jvmSettings>
                    <initialMemorySize>256M</initialMemorySize>
                    <maxMemorySize>1024M</maxMemorySize>
                    <extraArguments>
                        <extraArgument>-server</extraArgument>
                    </extraArguments>
                </jvmSettings>
            </daemon>
        </daemons>
    </configuration>
    <executions>
        <execution>
            <id>generate-jsw-scripts</id>
            <phase>package</phase>
            <goals>
                <goal>generate-daemons</goal>
            </goals>
        </execution>
    </executions>
</plugin>