resize2fs: Bad magic number in super-block while trying to open

Question

After a bit of trial and error... as mentioned in the possible answers, it turned out to require xfs_growfs rather than resize2fs.

CentOS 7,

fdisk /dev/xvda

Create new primary partition, set type as linux lvm.

n
p
3
t
8e
w

Create a new primary volume and extend the volume group to the new volume.

partprobe
pvcreate /dev/xvda3
vgextend /dev/centos /dev/xvda3

Check the physical volume for free space, extend the logical volume with the free space.

vgdisplay -v
lvextend -l+288 /dev/centos/root

Finally perform an online resize to resize the logical volume, then check the available space.

xfs_growfs /dev/centos/root
df -h

In Centos 7 default filesystem is xfs.

xfs file system support only extend not reduce. So if you want to resize the filesystem use xfs_growfs rather than resize2fs.

xfs_growfs /dev/root_vg/root 

Note: For ext4 filesystem use

resize2fs /dev/root_vg/root

I ran into the same exact problem around noon today and finally found a solution here --> Trying to resize2fs EB volume fails

I skipped mounting, since the partition was already mounted.

Apparently CentOS 7 uses XFS as the default file system and as a result resize2fs will fail.

I took a look in /etc/fstab, and guess what, XFS was staring me in the face... Hope this helps.

resize2fs Command will not work for all file systems.

Please confirm the file system of your instance using below command.

Please follow the procedure to expand volume by following the steps mentioned in Amazon official document for different file systems.

https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recognize-expanded-volume-linux.html

Default file system in Centos is xfs, use the following command for xfs file system to increase partition size.

sudo xfs_growfs -d /

then "df -h" to check.