OpenCL for custom systems on SoC prototyping board

Question

Is it possible to run OpenCL on a system designed by a user on a SoC prototyping board? To be more specific, I have a ZedBoard (Xilinx Zynq) that has Dual ARM cores and a Programmable Logic (PL) Area. If I design a simple system of my own that has a video processing accelerator implemented in the logic area, an ARM core and an AXI interconnect, what do I have to do to provide OpenCL support for this simple system? (In this simple system, the ARM core could be the "Host" and the video processing accelerator could be the "device").

I am a student and I have only some basic knowledge about OpenCL. I have researched about my question and have only ended up confusing myself. What are the things that have to be done to provide OpenCL support for a SoC? I understand that this may be a big project, but I need a guideline where to start and how to proceed.

Answer 1

what do I have to do to provide OpenCL support for this simple system?

Implement a OpenCL platform that makes either use of your ARM CPU or the FPGA (or both). I'd say that is pretty much impossible for you; ARM would surely offer one for the CPU if it was easy (and they definitely have the financial means to employ capable engineers/computer scientists), and implementing accelerators on an FPGA requires in-depth knowledge of FPGA development, as well as compiler theory and experience in systems design. I don't want to sound mean, but you seem to have none of these three.

You asked where to get started; I recommend just writing a first accelerator that e.g. adds up a vector of numbers; as soon as you have that, you will have a clearer idea of your task.

If you want to have a look at a reference: The Ettus USRP E310 is a zynq-based SDR device. Ettus has a technology called RFNoC, which allows users to write their own blocks to push data through. Notice that this took quite a few engineers and quite some time to get started. Notice further that it's much easier than implementing something that converts OpenCL to FPGA implementations.