Nginx High volume traffic load balancing

Question

For the last 3 weeks we have been testing Nginx as load balance. Currently, we're not succeeding to handle more than 1000 req/sec and 18K active connections. When we get to the above numbers, Nginx starts to hang, and returns timeout codes. The only way to get a response is to reduce the number of connection dramatically.

I must note that my servers can and does handle this amount of traffic on a daily basis and we currently use a simple round rubin DNS balancing.

We are using a dedicated server with the following HW:

• INTEL XEON E5620 CPU
• 16GB RAM
• 2T SATA HDD
• 1Gb/s connection
• OS: CentOS 5.8

We need to load balance 7 back servers running Tomcat6 and handling more than 2000 req/sec on peek times, handling HTTP and HTTPS requests.

While running Nginx's cpu consumption is around 15% and used RAM is about 100MB.

My questions are:

1. Has any one tried to load balance this kind of traffic using nginx?
2. Do you think nginx can handle such traffic?
3. Do you have any idea what can cause the hanging?
4. Am I missing something on my configurations?

Below are my configuration files:

nginx.conf:

user  nginx;
worker_processes 10;

worker_rlimit_nofile 200000;

error_log  /var/log/nginx/error.log warn;
pid        /var/run/nginx.pid;


events {
    worker_connections  10000;
    use epoll;
    multi_accept on;
}


http {
    include       /etc/nginx/mime.types;
    default_type  application/octet-stream;

    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log  /var/log/nginx/access.log  main;
    access_log off;

    sendfile        on;
    tcp_nopush     on;

    keepalive_timeout  65;
    reset_timedout_connection on;

    gzip  on;
    gzip_comp_level 1;
    include /etc/nginx/conf.d/*.conf;
} 

servers.conf:

#Set the upstream (servers to load balance)
#HTTP stream
upstream adsbar {
  least_conn;
  server xx.xx.xx.34 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.36 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.37 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.39 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.40 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.42 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.43 max_fails=2 fail_timeout=15s;
}      

#HTTPS stream
upstream adsbar-ssl {
  least_conn;
  server xx.xx.xx.34:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.36:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.37:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.39:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.40:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.42:443 max_fails=2 fail_timeout=15s;
  server xx.xx.xx.43:443 max_fails=2 fail_timeout=15s;
}

#HTTP
server {
  listen xxx.xxx.xxx.xxx:8080;
  server_name www.mycompany.com;
  location / {
      proxy_set_header Host $host;
      # So the original HTTP Host header is preserved
      proxy_set_header X-Real-IP $remote_addr;
      # The IP address of the client (which might be a proxy itself)
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_pass http://adsbar;
  }
}

#HTTPS
server {
  listen xxx.xxx.xxx.xxx:8443;
  server_name www.mycompany.com;
  ssl on;
  ssl_certificate /etc/pki/tls/certs/mycompany.crt;
  # Path to an SSL certificate;
  ssl_certificate_key /etc/pki/tls/private/mycompany.key;
  # Path to the key for the SSL certificate;
  location / {
      proxy_set_header Host $host;
      # So the original HTTP Host header is preserved
      proxy_set_header X-Real-IP $remote_addr;
      # The IP address of the client (which might be a proxy itself)
      proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
      proxy_pass https://adsbar-ssl;
  }
}

server {
    listen xxx.xxx.xxx.xxx:61709;
    location /nginx_status {
        stub_status on;
        access_log off;
        allow 127.0.0.1;
        deny all;
    }
} 

sysctl.conf:

# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 

0 is disabled, 1 is enabled.  See sysctl(8) and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 0

# Controls source route verification
net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 1

# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1

# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1

# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536

# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536

# Controls the maximum shared segment size, in bytes
kernel.shmmax = 68719476736

# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 4294967296

fs.file-max = 120000
net.ipv4.ip_conntrack_max = 131072
net.ipv4.tcp_max_syn_backlog = 8196
net.ipv4.tcp_fin_timeout = 25
net.ipv4.tcp_keepalive_time = 3600
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_rmem = 4096 25165824 25165824
net.core.rmem_max = 25165824
net.core.rmem_default = 25165824
net.ipv4.tcp_wmem = 4096 65536 25165824
net.core.wmem_max = 25165824
net.core.wmem_default = 65536
net.core.optmem_max = 25165824
net.core.netdev_max_backlog = 2500
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1

Any help, guidance, ideas will be highly appreciated.

Answer 1

Here are some good references:

http://dak1n1.com/blog/12-nginx-performance-tuning

Server fault: https://serverfault.com/questions/221292/tips-for-maximizing-nginx-requests-sec

A very well documented config from the dak1n1 link:

# This number should be, at maximum, the number of CPU cores on your system. 
# (since nginx doesn't benefit from more than one worker per CPU.)
worker_processes 24;

# Number of file descriptors used for Nginx. This is set in the OS with 'ulimit -n 200000'
# or using /etc/security/limits.conf
worker_rlimit_nofile 200000;


# only log critical errors
error_log /var/log/nginx/error.log crit


# Determines how many clients will be served by each worker process.
# (Max clients = worker_connections * worker_processes)
# "Max clients" is also limited by the number of socket connections available on the system (~64k)
worker_connections 4000;


# essential for linux, optmized to serve many clients with each thread
use epoll;


# Accept as many connections as possible, after nginx gets notification about a new connection.
# May flood worker_connections, if that option is set too low.
multi_accept on;


# Caches information about open FDs, freqently accessed files.
# Changing this setting, in my environment, brought performance up from 560k req/sec, to 904k req/sec.
# I recommend using some varient of these options, though not the specific values listed below.
open_file_cache max=200000 inactive=20s; 
open_file_cache_valid 30s; 
open_file_cache_min_uses 2;
open_file_cache_errors on;


# Buffer log writes to speed up IO, or disable them altogether
#access_log /var/log/nginx/access.log main buffer=16k;
access_log off;


# Sendfile copies data between one FD and other from within the kernel. 
# More efficient than read() + write(), since the requires transferring data to and from the user space.
sendfile on; 


# Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet, 
# instead of using partial frames. This is useful for prepending headers before calling sendfile, 
# or for throughput optimization.
tcp_nopush on;


# don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time.
tcp_nodelay on; 


# Timeout for keep-alive connections. Server will close connections after this time.
keepalive_timeout 30;


# Number of requests a client can make over the keep-alive connection. This is set high for testing.
keepalive_requests 100000;


# allow the server to close the connection after a client stops responding. Frees up socket-associated memory.
reset_timedout_connection on;


# send the client a "request timed out" if the body is not loaded by this time. Default 60.
client_body_timeout 10;


# If the client stops reading data, free up the stale client connection after this much time. Default 60.
send_timeout 2;


# Compression. Reduces the amount of data that needs to be transferred over the network
gzip on;
gzip_min_length 10240;
gzip_proxied expired no-cache no-store private auth;
gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml;
gzip_disable "MSIE [1-6]\.";

Also more info on linux system tuning for sysctl.conf:

# Increase system IP port limits to allow for more connections

net.ipv4.ip_local_port_range = 2000 65000


net.ipv4.tcp_window_scaling = 1


# number of packets to keep in backlog before the kernel starts dropping them 
net.ipv4.tcp_max_syn_backlog = 3240000


# increase socket listen backlog
net.core.somaxconn = 3240000
net.ipv4.tcp_max_tw_buckets = 1440000


# Increase TCP buffer sizes
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.tcp_congestion_control = cubic