NFC standards (NFC Forum, ISO/IEC, ECMA

Question

I am often being asked about standards, the NFC is based on. I summarized my knowledge in the text below. I hope it can be an answer to such questions. Please feel free to correct it by posting comments and replies - I will include it into my text.

Since NFC is based on RFID, it is often seen as RFID extension, its form or subset. It is correct because many existing standards from RFID were adopted in the NFC. The NFC base standard for physical layer is NFCIP-1 (ISO 18092 or ECMA 340) - it standardizes communication between two NFC devices. The RF layer use in the NFCIP-1 is directly inherited from older ISO standards ISO 14443 (proximity contactless cards) more specifically the Type A protocol defined in that standard, and on Japanese JIS 6319-4 (on which Sony FeliCa is based, also used by the NFC Forum Type 3 Tag standard). The consequence of that is that NFC devices (reader/writer mode) is compatible with ISO 14443 smart cards.

NFCIP-1 defines newly the active mode. In this mode in which both communicating NFC devices must have own source of power for generating RF fields (i.e. two mobile devices or mobile device and NFC reader) and both can be initiators of the communication.

The 2nd major standard is NFCIP-2 (ISO 21481 or ECMA 352), which defines selection mechanism between different contactless technologies that operates on the same frequency 13.56Mhz. It is intended to be used by mobile devices that support communication according to ISO 18092, ISO 14443, but they be also compatible other contactless standards like ISO 15693.

In addition to that NFC Forum released also couple of other standards like NDEF (data format) RTD (record types for various purposes), and recommendations for NFC Handover and in particular use of the NFC for Bluetooth pairing. The Wi-Fi Alliance introduced NFC as the one of four ways to configure home networks.

NFC forum also defined LLCP protocol used on the top of NFCIP-1 in peer-to-peer communication. Another protocol used in peer-to-peer communication on the top of the LLCP is SNEP (Simple NDEF Exchange protocol), which allows the exchange of NDEF messages analogous to tag operation specifications.

NFC devices can in addition work in card emulation mode, which allows them to pretend they are passive contactless smart cards. This might be the most important mode, since it allows the mobile phones act as contactless payment cards. There are couple of standards for interconnection of NFC controller with secure element (element used for storing secure applications and sensitive data) used in card emulation mode - SWP (Not standard yet - see ETSI TS 102 613 V.9.1.0) and NFC-WI (ECMA-373).

I am not 100% sure about above text correctness, so my question is - is it correct or not? Is there anything you would add?

BR STeN

---

Added comments from NFC guy

Answer 1

I am not sure your questions belong on SO, as they are not related to programming. Stil, I have some comments and additions.

NFC-IP1 is based on ISO 14443, more specifically the Type A protocol defined in that standard, and on JIS 6319-4 (on which Sony FeliCa is based, also used by the NFC Forum Type 3 Tag standard). NFC-IP1 is not based in any way on ISO 15693.

I don't think it is necessary for a device to support NFC-IP2 to be considered an NFC-enabled device. Also, LLCP does not require active mode.

When talking about NFC standards, I would also mention SNEP (Simple NDEF Exchange Protocol), which uses LLCP to exchange NDEF messages. Next to Bluetooth handover, NFC Connection Handover has also been standardized for WiFi by the WiFi Alliance.

Connecting a secure element to an NFC controller: the protocol is called SWP (not SWI). This protocol is typically used to connect a SIM card as a secure element to the NFC controller.

Another standard you may find worth mentioning is ISO 7816-4, as that is used by the NFC Forum Type 4 Tag standard.