In matplotlib, how can I plot a multi-colored line, like a rainbow

Question

I would like to plot parallel lines with different colors. E.g. rather than a single red line of thickness 6, I would like to have two parallel lines of thickness 3, with one red and one blue. Any thoughts would be appreciated.
Merci

Even with the smart offsetting (s. below), there is still an issue in a view that has sharp angles between consecutive points.

Zoomed view of smart offsetting:

Overlaying lines of varying thickness:

Answer 1

Plotting parallel lines is not an easy task. Using a simple uniform offset will of course not show the desired result. This is shown in the left picture below.
Such a simple offset can be produced in matplotlib as shown in the transformation tutorial.

Method1

A better solution may be to use the idea sketched on the right side. To calculate the offset of the nth point we can use the normal vector to the line between the n-1st and the n+1st point and use the same distance along this normal vector to calculate the offset point.

The advantage of this method is that we have the same number of points in the original line as in the offset line. The disadvantage is that it is not completely accurate, as can be see in the picture.

This method is implemented in the function offset in the code below.
In order to make this useful for a matplotlib plot, we need to consider that the linewidth should be independent of the data units. Linewidth is usually given in units of points, and the offset would best be given in the same unit, such that e.g. the requirement from the question ("two parallel lines of width 3") can be met. The idea is therefore to transform the coordinates from data to display coordinates, using ax.transData.transform. Also the offset in points o can be transformed to the same units: Using the dpi and the standard of ppi=72, the offset in display coordinates is o*dpi/ppi. After the offset in display coordinates has been applied, the inverse transform (ax.transData.inverted().transform) allows a backtransformation.

Now there is another dimension of the problem: How to assure that the offset remains the same independent of the zoom and size of the figure? This last point can be addressed by recalculating the offset each time a zooming of resizing event has taken place.

Here is how a rainbow curve would look like produced by this method.

And here is the code to produce the image.

import numpy as np import matplotlib.pyplot as plt  dpi = 100  def offset(x,y, o):     """ Offset coordinates given by array x,y by o """     X = np.c_[x,y].T     m = np.array([[0,-1],[1,0]])     R = np.zeros_like(X)     S = X[:,2:]-X[:,:-2]     R[:,1:-1] = np.dot(m, S)     R[:,0] = np.dot(m, X[:,1]-X[:,0])     R[:,-1] = np.dot(m, X[:,-1]-X[:,-2])     On = R/np.sqrt(R[0,:]**2+R[1,:]**2)*o     Out = On+X     return Out[0,:], Out[1,:]   def offset_curve(ax, x,y, o):     """ Offset array x,y in data coordinates         by o in points """     trans = ax.transData.transform     inv = ax.transData.inverted().transform     X = np.c_[x,y]     Xt = trans(X)     xto, yto = offset(Xt[:,0],Xt[:,1],o*dpi/72. )     Xto = np.c_[xto, yto]     Xo = inv(Xto)     return Xo[:,0], Xo[:,1]   # some single points y = np.array([1,2,2,3,3,0])     x = np.arange(len(y)) #or try a sinus x = np.linspace(0,9) y=np.sin(x)*x/3.   fig, ax=plt.subplots(figsize=(4,2.5), dpi=dpi)  cols = ["#fff40b", "#00e103", "#ff9921", "#3a00ef", "#ff2121", "#af00e7"] lw = 2. lines = [] for i in range(len(cols)):     l, = plt.plot(x,y, lw=lw, color=cols[i])     lines.append(l)   def plot_rainbow(event=None):     xr = range(6); yr = range(6);      xr[0],yr[0] = offset_curve(ax, x,y, lw/2.)     xr[1],yr[1] = offset_curve(ax, x,y, -lw/2.)     xr[2],yr[2] = offset_curve(ax, xr[0],yr[0], lw)     xr[3],yr[3] = offset_curve(ax, xr[1],yr[1], -lw)     xr[4],yr[4] = offset_curve(ax, xr[2],yr[2], lw)     xr[5],yr[5] = offset_curve(ax, xr[3],yr[3], -lw)      for i  in range(6):              lines[i].set_data(xr[i], yr[i])   plot_rainbow()  fig.canvas.mpl_connect("resize_event", plot_rainbow) fig.canvas.mpl_connect("button_release_event", plot_rainbow)  plt.savefig(__file__+".png", dpi=dpi) plt.show() 

---

Method2

To avoid overlapping lines, one has to use a more complicated solution. One could first offset every point normal to the two line segments it is part of (green points in the picture below). Then calculate the line through those offset points and find their intersection.

A particular case would be when the slopes of two subsequent line segments equal. This has to be taken care of (eps in the code below).

from __future__ import division import numpy as np import matplotlib.pyplot as plt  dpi = 100  def intersect(p1, p2, q1, q2, eps=1.e-10):     """ given two lines, first through points pn, second through qn,         find the intersection """     x1 = p1[0]; y1 = p1[1]; x2 = p2[0]; y2 = p2[1]     x3 = q1[0]; y3 = q1[1]; x4 = q2[0]; y4 = q2[1]     nomX = ((x1*y2-y1*x2)*(x3-x4)- (x1-x2)*(x3*y4-y3*x4))      denom = float(  (x1-x2)*(y3-y4) - (y1-y2)*(x3-x4) )     nomY = (x1*y2-y1*x2)*(y3-y4) - (y1-y2)*(x3*y4-y3*x4)     if np.abs(denom) < eps:         #print "intersection undefined", p1         return np.array( p1 )     else:         return np.array( [ nomX/denom , nomY/denom ])   def offset(x,y, o, eps=1.e-10):     """ Offset coordinates given by array x,y by o """     X = np.c_[x,y].T     m = np.array([[0,-1],[1,0]])     S = X[:,1:]-X[:,:-1]     R = np.dot(m, S)     norm = np.sqrt(R[0,:]**2+R[1,:]**2) / o     On = R/norm     Outa = On+X[:,1:]     Outb = On+X[:,:-1]     G = np.zeros_like(X)     for i in xrange(0, len(X[0,:])-2):         p = intersect(Outa[:,i], Outb[:,i], Outa[:,i+1], Outb[:,i+1], eps=eps)         G[:,i+1] = p     G[:,0] = Outb[:,0]     G[:,-1] = Outa[:,-1]     return G[0,:], G[1,:]   def offset_curve(ax, x,y, o, eps=1.e-10):     """ Offset array x,y in data coordinates         by o in points """     trans = ax.transData.transform     inv = ax.transData.inverted().transform     X = np.c_[x,y]     Xt = trans(X)     xto, yto = offset(Xt[:,0],Xt[:,1],o*dpi/72., eps=eps )     Xto = np.c_[xto, yto]     Xo = inv(Xto)     return Xo[:,0], Xo[:,1]   # some single points y = np.array([1,1,2,0,3,2,1.,4,3]) *1.e9    x = np.arange(len(y)) x[3]=x[4] #or try a sinus #x = np.linspace(0,9) #y=np.sin(x)*x/3.   fig, ax=plt.subplots(figsize=(4,2.5), dpi=dpi)  cols = ["r", "b"] lw = 11. lines = [] for i in range(len(cols)):     l, = plt.plot(x,y, lw=lw, color=cols[i], solid_joinstyle="miter")     lines.append(l)   def plot_rainbow(event=None):     xr = range(2); yr = range(2);      xr[0],yr[0] = offset_curve(ax, x,y,  lw/2.)     xr[1],yr[1] = offset_curve(ax, x,y, -lw/2.)      for i  in range(2):              lines[i].set_data(xr[i], yr[i])   plot_rainbow()  fig.canvas.mpl_connect("resize_event", plot_rainbow) fig.canvas.mpl_connect("button_release_event", plot_rainbow)  plt.show() 

Note that this method should work well as long as the offset between the lines is smaller then the distance between subsequent points on the line. Otherwise method 1 may be better suited.

Answer 2

The best that I can think of is to take your data, generate a series of small offsets, and use fill_between to make bands of whatever color you like.

I wrote a function to do this. I don't know what shape you're trying to plot, so this may or may not work for you. I tested it on a parabola and got decent results. You can also play around with the list of colors.

def rainbow_plot(x, y, spacing=0.1):     fig, ax = plt.subplots()     colors = ['red', 'yellow', 'green', 'cyan','blue']     top = max(y)     lines = []     for i in range(len(colors)+1):         newline_data = y - top*spacing*i         lines.append(newline_data)     for i, c in enumerate(colors):         ax.fill_between(x, lines[i], lines[i+1], facecolor=c)     return fig, ax  x = np.linspace(0,1,51) y = 1-(x-0.5)**2 rainbow_plot(x,y)