Menu
I am fairly new to DataGrip, and couldn't figure out how to reconnect an existing console. My Redshift connection disconnects if the connection is inactive for more than 20 minutes, and to reconnect I have to restart the console.
722
Check that your TV is set to the correct input signal (HDMI). Check that the HDMI cable connection to your console is secure. Check that the HDMI cable connection to your TV is secure. Power cycle your Xbox One: Press and hold the Xbox button for 10 seconds to turn off the console, and then turn it on again.
Try placing both the router and the Xbox One up as high as possible to reduce interference. Remove or unplug sources of interference like cordless phones, intercoms, and microwaves. Try switching your Wi-Fi network to a different channel. If you're using a 5 GHz Wi-Fi network, try switching to 2.4 GHz.
Unplug the network cable from the back of your console. Inspect the cable's connector and the Xbox console's socket to make sure that they are clean and free of debris. Plug it back in, making sure it clicks into place. Follow the network cable to your router, gateway, or modem and unplug it.
Unplug the power cord from the back of the modem. After one minute, plug the modem back in and wait for all the lights to return to their normal state. Turn on the console. Test your Xbox connection again (Profile & system > Settings > General > Network settings > Test network connection).
Now I have just tried to wait for 20 minutes and then run statements and all was ok. Anyway, try to choose "Disconnect" from context menu of your data source and then run statements in console again (so, the console will restore "broken" connection and it might work).
160
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With
