Extensive comparison between SIMULINK and LabVIEW

Question

I am trying to determine which of these two to buy for my work. I have used SIMULINK but not LabVIEW. Is there anyone who has used both and would like to provide some details? My investigation criteria are the user friendliness, availability of libraries and template functions, real-time probing facility, COTS hardware interfacing opportunity, quality of code generation, design for testability (i.e. ease of generating unit/acceptance tests), etc. However, if anyone would like to educate me with more criteria, please do so by all means!

For anyone who does not know about SIMULINK and LabVIEW - These are both Domain-Specific Languages (DSLs) intended for graphical dataflow modelling (and also code generation). These are multi-industrial tools and quite heavily used for engineering design and modelling.

IMPORTANT - I am quite interested to know if SIMULINK and LabVIEW offer real-time probing. For example, I have a model that I want to simulate. If there are variables associated to certain building blocks in that model, could I view them changing as the simulation continues? I know that it is certainly not possible with SIMULINK as it has a step-by-step debugger. I am not aware of anything similar in LabVIEW.

I really have not used LabVIEW and cannot obtain it temporarily as my work internet has got download restrictions and administrative privilege issues. This is the reason why I simply cannot use only NI website to draw conclusions. If there is any white paper available that addresses this issue, I would also love to know :)

UPDATE SINCE LAST POST

I have used MATLAB code generator and will not say that it is the best. However, I hear now that SIMULINK Embedded Coder is the best code generator and almost one of its own kind. Can anyone confirm whether or not this is good for safety critical system design i.e. generating code from safety-critical subsystem models. I know that the Mathworks is constantly trying to close the gap to achieve fully-flexible production-level C/C++ code generation.

I know that an ideal answer would be,"Depending on what you are trying to do, use a bit of both". And interestingly, I think I am heading to that direction. ATEOTD, it is a lot of money and need to be spent "nicely".

Thanks in advance.

Answer 1

I used labVIEW from 1995, and Simulink from 2000. Now I am involved in control system design, and simulation of robotic systems using labVIEW Real Time and automotive ECUs using MATALAB/Simulink/DSPACE .

LabVIEW is focus on measurement systems, and MATLAB/SIMULINK in dynamic simulation, so,

If you run complex simulations, and your work is create/debug complex simulation models of controllers or plants, use Simulink+RealTimeWorkShop+StateFlowChart. LabVIEW has no eficient code generators for dynamic simulation. RTW generates smaller and fastest code.

If your main work is developing systems with controllers and GUI for machines, or you want to deploy the controllers on field, use labVIEW.

If your main work is developing flexible HIL or SIL systems, with a good GUI, you can use VeriStand. Veristand can mix Simulink and LabVIEW code.

And if you have a big budget ( VERY BIG ) and you are working in automotive control prototypes, DSPACE hardware is a very good choice for fast development of automotive ECUS, or OPAL to develope electric power circuits. But only for prototype or HIL testing of controllers.

From the point of view of COTS hardware: Mathworks don´t manufacture hardware -> Matlab/Simulink support hardware from several vendors.

National Instruments produce/sell hardware->LabVIEW Real Time is focused in support NationalInstruments hardware. There are no COTS full replacement.

Answer 2

I have absolutely no experience with Simulink, so I'll comment only on LV, although a quick read about Simulink on Wikipedia seems to indicate that it's focused mainly on simulation and modelling, which is certainly not the case with LabVIEW.

OK, so first of all, LV is NOT a DSL. While you wouldn't want to use it for any project, it's a general purpose programming language and you should take that into account. I know that NI has a simulation toolkit for LV, which might help you if that's what you're after, but I have absolutely no experience with it. The images I saw of it seemed to indicate that it adds a special kind of diagram to LV for simulation.

Second, LV is not restricted to any kind of hardware. It's a general purpose language, so you can write code which won't use any hardware at all, code which will use or run on NI's hardware or code which will use any hardware (be it through DLL calls, .NET assemblies, RS232, TCP, GPIB or any other option you can think of). There is quite a large collection of LV drivers for various devices and the quality of the driver usually depends on who wrote it.

Third, you can certainly probe in real time in LV. You write your code, just as you would in C or Java, and when you run it, you have several debugging options:

1. Single stepping. This isn't actually all that common, partially because LV is parallel.
2. Execution highlighting. This runs the code in slow motion, while showing all the values in the various wires.
3. Probes, which show you the last value that each wire had, where wires fill the same function that variables do in text based languages. This updates in real time and I assume is what you want.
4. Retain wire values, which allows you to probe a wire even after data passed through it. This is similar to what you get in text based IDEs with variables. In LV you don't usually have it because wire values are transient, so the value is not kept around unless you explicitly ask for it.

Of course, since you're talking about code, you could also simply write the code to display the values to the screen on a graph or a numeric indicator or to log them to a file, so there should be no need for actual probing. You could also add analysis code, etc.

Fourth, you could try downloading and running LV in a fully functional evaluation mode. If I remember correctly, NI currently gives you 7 days and then 45 days if you register on their site. If you can't do that on a work computer, you could try at home. If your problem is only with downloading, you could try contacting your local NI office and asking them to send you a DVD.

Note that I don't really know anything about modelling and simulation, so I have no idea what kind of code you would actually have to write in order to do what you want. I assume that if NI has a special module for it, then it's not something that you can completely cover in regular code (at least not if you want the original notation), but I would say that if you could write the code that does what you want in C, there's no reason you shouldn't be able to write it in LV (assuming, of course, that you know how to write code in LV).