In YAML, I have a string that's very long. I want to keep this within the 80-column (or so) view of my editor, so I'd like to break the string. What's the syntax for this?
In other words, I have this:
Key: 'this is my very very very very very very long string'
and I'd like to have this (or something to this effect):
Key: 'this is my very very very ' +
'long string'
I'd like to use quotes as above, so I don't need to escape anything within the string.
There are 5 6 NINE (or 63*, depending how you count) different ways to write multi-line strings in YAML.
Use >
most of the time: interior line breaks are stripped out, although you get one at the end:
key: >
Your long
string here.
Use |
if you want those linebreaks to be preserved as \n
(for instance, embedded markdown with paragraphs).
key: |
### Heading
* Bullet
* Points
Use >-
or |-
instead if you don't want a linebreak appended at the end.
Use "..."
if you need to split lines in the middle of words or want to literally type linebreaks as \n
:
key: "Antidisestab\
lishmentarianism.\n\nGet on it."
YAML is crazy.
>
, |
)These allow characters such as \
and "
without escaping, and add a new line (\n
) to the end of your string.
>
Folded style removes single newlines within the string (but adds one at the end, and converts double newlines to singles):
Key: >
this is my very very very
long string
β this is my very very very long string\n
Extra leading space is retained and causes extra newlines. See note below.
Advice: Use this. Usually this is what you want.
|
Literal style
turns every newline within the string into a literal newline, and adds one at the end:
Key: |
this is my very very very
long string
β this is my very very very\nlong string\n
Here's the official definition from the YAML Spec 1.2
Scalar content can be written in block notation, using a literal style (indicated by β|β) where all line breaks are significant. Alternatively, they can be written with the folded style (denoted by β>β) where each line break is folded to a space unless it ends an empty or a more-indented line.
Advice: Use this for inserting formatted text (especially Markdown) as a value.
>-
, |-
, >+
, |+
)You can control the handling of the final new line in the string, and any trailing blank lines (\n\n
) by adding a block chomping indicator character:
>
, |
: "clip": keep the line feed, remove the trailing blank lines.>-
, |-
: "strip": remove the line feed, remove the trailing blank lines.>+
, |+
: "keep": keep the line feed, keep trailing blank lines.
, "
, '
)These have limited escaping, and construct a single-line string with no new line characters. They can begin on the same line as the key, or with additional newlines first, which are stripped. Doubled newline characters become one newline.
plain style (no escaping, no #
or :
combinations, first character can't be "
, '
or many other punctuation characters ):
Key: this is my very very very
long string
Advice: Avoid. May look convenient, but you're liable to shoot yourself in the foot by accidentally using forbidden punctuation and triggering a syntax error.
double-quoted style (\
and "
must be escaped by \
, newlines can be inserted with a literal \n
sequence, lines can be concatenated without spaces with trailing \
):
Key: "this is my very very \"very\" loooo\
ng string.\n\nLove, YAML."
β "this is my very very \"very\" loooong string.\n\nLove, YAML."
Advice: Use in very specific situations. This is the only way you can break a very long token (like a URL) across lines without adding spaces. And maybe adding newlines mid-line is conceivably useful.
single-quoted style (literal '
must be doubled, no special characters, possibly useful for expressing strings starting with double quotes):
Key: 'this is my very very "very"
long string, isn''t it.'
β "this is my very very \"very\" long string, isn't it."
Advice: Avoid. Very few benefits, mostly inconvenience.
Just in case the above isn't enough for you, you can add a "block indentation indicator" (after your block chomping indicator, if you have one):
- >8
My long string
starts over here
- |+1
This one
starts here
>
)If you insert extra spaces at the start of not-the-first lines in Folded style, they will be kept, with a bonus newline. (This doesn't happen with flow styles.) Section 6.5:
In addition, folding does not apply to line breaks surrounding text lines that contain leading white space. Note that such a more-indented line may consist only of such leading white space.
- >
my long
string
many spaces above
- my long
string
many spaces above
β ["my long\n string\n \nmany spaces above\n","my long string\nmany spaces above"]
In this table, _
means space character
. \n
means "newline character" (\n
in JavaScript) except under "Other features". "Leading space" applies after the first line (which establishes the indent)
> |
| |
" |
' |
>- |
>+ |
|- |
|+ |
||
---|---|---|---|---|---|---|---|---|---|
Spaces/newlines converted as: | |||||||||
Trailing space β | _ | _ | _ | _ | _ | _ | |||
Leading space β | \n_ | \n_ | \n_ | \n_ | \n_ | \n_ | |||
Single newline β | _ | \n | _ | _ | _ | _ | _ | \n | \n |
Double newline β | \n | \n\n | \n | \n | \n | \n | \n | \n\n | \n\n |
Final newline β | \n | \n | \n | \n | |||||
Final double newline β | \n\n | \n\n | |||||||
How to create a literal: | |||||||||
Single quote | ' | ' | ' | ' | '' | ' | ' | ' | ' |
Double quote | " | " | " | \" | " | " | " | " | " |
Backslash | \ | \ | \ | \\ | \ | \ | \ | \ | \ |
Other features | |||||||||
In-line newlines with \n
|
π« | π« | π« | β | π« | π« | π« | π« | π« |
Spaceless newlines with \
|
π« | π« | π« | β | π« | π« | π« | π« | π« |
# or : in value |
β | β | π« | β | β | β | β | β | β |
Can start on same line as key |
π« | π« | β | β | β | π« | π« | π« | π« |
Note the trailing spaces on the line before "spaces."
- >
very "long"
'string' with
paragraph gap, \n and
spaces.
- |
very "long"
'string' with
paragraph gap, \n and
spaces.
- very "long"
'string' with
paragraph gap, \n and
spaces.
- "very \"long\"
'string' with
paragraph gap, \n and
s\
p\
a\
c\
e\
s."
- 'very "long"
''string'' with
paragraph gap, \n and
spaces.'
- >-
very "long"
'string' with
paragraph gap, \n and
spaces.
[
"very \"long\" 'string' with\nparagraph gap, \\n and spaces.\n",
"very \"long\"\n'string' with\n\nparagraph gap, \\n and \nspaces.\n",
"very \"long\" 'string' with\nparagraph gap, \\n and spaces.",
"very \"long\" 'string' with\nparagraph gap, \n and spaces.",
"very \"long\" 'string' with\nparagraph gap, \\n and spaces.",
"very \"long\" 'string' with\nparagraph gap, \\n and spaces."
]
*
2 block styles, each with 2 possible block chomping indicators (or none), and with 9 possible indentation indicators (or none), 1 plain style and 2 quoted styles: 2 x (2 + 1) x (9 + 1) + 1 + 2 = 63
Some of this information has also been summarised here.
Using yaml folded style. The indention in each line will be ignored. A line break will be inserted at the end.
Key: >
This is a very long sentence
that spans several lines in the YAML
but which will be rendered as a string
with only a single carriage return appended to the end.
http://symfony.com/doc/current/components/yaml/yaml_format.html
You can use the "block chomping indicator" to eliminate the trailing line break, as follows:
Key: >-
This is a very long sentence
that spans several lines in the YAML
but which will be rendered as a string
with NO carriage returns.
In either case, each line break is replaced by a space.
There are other control tools available as well (for controlling indentation for example).
See https://yaml-multiline.info/
To preserve newlines use |
, for example:
|
This is a very long sentence
that spans several lines in the YAML
but which will be rendered as a string
with newlines preserved.
is translated to "This is a very long sentenceβ\n that spans several lines in the YAMLβ\n but which will be rendered as a stringβ\n with newlines preserved.\n"
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With