Continuous waveform audio synthesizer

Question

I'm starting to write a soft synthesizer with a peculiar characteristic: The oscillators will have a "continuous waveform" knob that will allow users to select sine, square and saw tooth waves in a continuous fashion. That is, if the knob is all the way to the left, the output will be a sine wave, if it's in the middle it will be a saw tooth wave, if it's all the way to the right it'll be a square wave and then the intermediate positions will output waves that are "interpolated" versions of the classic waves. -- Knob positions and types of waves could be changed but having a continuous way to change wave forms is desired --

I've thought of a couple of ways to implement the oscillator:

1. Come up with a function that takes the knob position and calculates the spectrum of the actual signal (an array of amplitudes and frequencies) and then use a bunch of sine functions and a sum block to implement the output signal.

2. Similar to 1. but apply a reverse Fourier transform instead of the sines and sum (OK, at this point I'm not sure if they are actually the same thing.)

3. Generate a waveform table for each possible knob position and use a wave table synthesis technique to generate the output signal.

4. Start with 2 saw tooth waves (they contain both even and odd harmonics), invert one and sum them, and control the amplitude of each one of them with the knob. The wave forms would not be

I have a few questions:

A. I've read that technique number 1 is very processor intensive and not really feasible. Does this hold true for ARM processors such as the one on the iPad??

B. Whatever technique I end up choosing, can the problem of aliasing be resolved simply by connecting a low-pass filter to the output of the oscillator?

C. Any other suggestion on how to implement such an oscillator?

D. Any suggestions on which C++ toolkit to use? I've been looking at the STK from CCRMA but I don't know if there are other more suitable libraries.

Wish me luck! ;)

Edit: Someone pointed me to din last night. Bezier curves are another option to consider.

Answer 1

I'm not sure you're not over-complicating this. If I understand correctly, all you're doing with your continuous waveform knob is effectively mixing together different amounts of the 3 waveforms. So, just generate all 3 waveforms all the time, then sum them together with different gains according to the mix of waveforms you've described.

For band limited waveform synthesis to avoid aliasing, you'll probably find most of what you need here.

Hope that helps.

Answer 2

Here is an answer for B (Can the problem of aliasing be resolved simply by connecting a low-pass filter to the output?) which touches on some of the other points.

Unfortunately, the answer is 'no'. Aliasing is caused by the presence of harmonic frequencies above the Nyquist frequency (i.e. half the sample rate.) If those harmonics are present in your oscillator's waveform, filtering cannot help. (Suitably aggressive filtering will destroy the character of the waves you've generated.) Oversampling (another answer mentions this) can, but it's expensive.

To avoid this, you have to generate 'band limited' waveforms. That is, waveforms which have no harmonics above some chosen value < Nyquist. Doing this is non-trivial. This paper here is worth a read. There are two established, practical approaches to solving this problem: BLITs (Band Limited Impulse Train) and MinBLEPs. Both approaches try to smooth out harmonic-generating discontinuities by inserting 'stuff' at appropriate points in the waveform.

With that in mind your options start to shrink. Probably the best compromise between ease and sound would be generating a series of band limited wavetables. You'd still need to investigate some form of anti-aliasing to handle the interpolated waves, though.

The iDevice ARM is quite capable of doing DSP in realtime. General advice: write tight code, use inline functions and avoid division. Your render loop is going to be called 44,100 times a second, so, as long as your code completes within 1/44100 sec (0.023ms) you'll have no problems. In practice, you should be able to run several oscillators simultaneously with no issues at all. The presence of all those music apps on the app store is testament to that.

STK is a great intro library. (Perry Cook's book "Real-time Audio Synthesis for Interactive Applications" is also a good grounding and worth a read.) STK purposely not optimised though, and I'm not sure how well it would lend itself to generating your 'continuous' waveforms. kvraudio.com and musicdsp.org should be on your reading list.