I just upgraded my laptop from Windows 7 to Windows 10 and found that I am unable to start Virtualbox VMs configured with a bridged adapter.
See the configuration below:
To enable bridged networking, open the Settings dialog of a virtual machine, go to the Network page and select Bridged Network in the drop-down list for the Attached To field. Select a host interface from the list at the bottom of the page, which contains the physical network interfaces of your systems.
In the Bridged networking mode of VirtualBox, a device driver called 'net filter' is used on the Host machine. This driver filters the data from the physical adapter of the Host. By using this driver, VirtualBox takes data from the physical network and also inserts it into it.
First of all you have to create a VirtualBox Host-Only Ethernet adapter
In Virtualbox :
In Windows :
Now configure your VM :
You can now configure your static IP Address by modifying /etc/network/interfaces :
auto eth0 iface eth0 inet static address 10.1.1.100 netmask 255.255.255.0 gateway 10.1.1.1
You can now restart eth0 by doing :
sudo ifdown eth0 sudo ifup eth0
Some wireless adapters don't work
Go to your net card. Go to properties and then Install
-> Service
, which? This: VirtualBox NDIS6 Bridged Networking Driver
Reopen Virtual Box
If you love us? You can donate to us via Paypal or buy me a coffee so we can maintain and grow! Thank you!
Donate Us With