Bootloader Working

Question

I am working on Uboot bootloader. I have some basic question about the functionality of Bootloader and the application it is going to handle:

Q1: As per my knowledge, bootloader is used to download the application into memory. Over internet I also found that bootloader copies the application to RAM and then the application runs from RAM. I am confused with the working of Bootloader...When application is provided to bootloader through serial or TFTP, What happens next, whether Bootloader copies it to RAM first or whether it writes directly to Flash.

Q2: Why there is a need for Bootloader to copy application to RAM and then run the application from RAM? What difficulties we will face if our application runs from FLASH?

Q3: What is the meaning of statement "My application is running from RAM/FLASH"? Is it mean that our application's .text segment or .code segment is in RAM/FLASH? And we are not concerned about .bss section because it is designed to be in RAM.

Thanks Phogat

Answer 1

When any hardware system is designed, the designer must consider where the executable code will be located. The answer depends on the microcontroller, the included memory types, and the system requirements. So the answer varies from system to system. Some systems execute code located in RAM. Other systems execute code located in flash. You didn't tell us enough about your system to know what it is designed to do.

A system might be designed to execute code from RAM because RAM access times are faster than flash so code can execute faster. A system might be designed to execute code from flash because flash is plentiful and RAM may not be. A system might be designed to execute code from flash so that it boots more quickly. These are just some examples and there are other considerations as well.

RAM is volatile so it does not retain code through a power cycle. If the system executes code located in RAM then a bootloader is required to obtain and write the code to RAM at powerup. Flash is non-volatile so execution can start right away at powerup and a bootloader is not necessary (but may still be useful).

Regarding Q3, the answer is yes. If the system is running from RAM then the .text will be located in RAM (but not until after the bootloader has copied it to there). If the system is running from flash then the .text section will be located in flash. The .bss section is variables and will be in RAM regardless of where the .text section is.