why does hexdump reverse the input when given "\xFF\x00"? [duplicate]

Question

Why does hexdump print 00ff here? I expected it to print ff00 , like it got in stdin, but

$ printf "\xFF\x00" | hexdump
0000000 00ff
0000002

hexdump decided to reverse it? why?

Answer 1

This is because hexdump is dumping 16-bit WORDS (=2-bytes-hex) and x86 processors stores words in little-endian format (you're probably using this processor).

From Wikipedia, Endianness:

A big-endian system stores the most significant byte of a word at the smallest memory address and the least significant byte at the largest. A little-endian system, in contrast, stores the least-significant byte at the smallest address.

Notice that, when you use hexdump without specifiyng a parameter, the output is similar to -x.

From hexdump, man page:

       If no format strings are specified, the default
       display is very similar to the -x output format (the
       -x option causes more space to be used between format
       units than in the default output).
...
       -x, --two-bytes-hex
           Two-byte hexadecimal display. Display the input offset in
           hexadecimal, followed by eight space-separated, four-column,
           zero-filled, two-byte quantities of input data, in
           hexadecimal, per line.

If you want to dump single bytes in order, use -C parameter or specify your custom formatting with -e.

$ printf "\xFF\x00" | hexdump -C
00000000  ff 00                                             |?.|
00000002
$ printf "\xFF\x00" | hexdump -e '"%07.7_ax " 8/1 "%02x " "\n"'
0000000 ff 00